|
|
2N5115のメーカーはMicrossです、この部品の機能は「Switching」です。 |
部品番号 | 2N5115 |
| |
部品説明 | Switching | ||
メーカ | Micross | ||
ロゴ | |||
このページの下部にプレビューと2N5115ダウンロード(pdfファイル)リンクがあります。 Total 1 pages
2N5115
P-CHANNEL JFET
Linear Systems replaces discontinued Siliconix 2N5115
This analog switch is designed for inverting switching
into inverting input of an Operational Amplifier.
The hermetically sealed TO-18 package is well suited
for hi-reliability and harsh environment applications.
FEATURES
DIRECT REPLACEMENT FOR SILICONIX 2N5115
LOW ON RESISTANCE
LOW CAPACITANCE
rDS(on) ≤ 100Ω
6pF
ABSOLUTE MAXIMUM RATINGS @ 25°C (unless otherwise noted)
(See Packaging Information).
Maximum Temperatures
2N5115 Benefits:
Low On Resistance
ID(off) ≤ 500 pA
Switches directly from TTL logic
2N5115 Applications:
Analog Switches
Commutators
Choppers
Storage Temperature
Operating Junction Temperature
Maximum Power Dissipation
Continuous Power Dissipation
MAXIMUM CURRENT
Gate Current (Note 1)
MAXIMUM VOLTAGES
Gate to Drain Voltage
Gate to Source Voltage
‐55°C to +200°C
‐55°C to +200°C
500mW
IG = ‐50mA
VGDS = 30V
VGSS = 30V
2N5115 ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted)
SYMBOL
CHARACTERISTIC
MIN TYP. MAX UNITS
CONDITIONS
BVGSS
VGS(off)
VGS(F)
Gate to Source Breakdown Voltage
Gate to Source Cutoff Voltage
Gate to Source Forward Voltage
30 ‐‐
‐‐
3 ‐‐ 6
‐‐ ‐0.7 ‐1
V
IG = 1µA, VDS = 0V
VDS = ‐15V, ID = ‐1nA
IG = ‐1mA, VDS = 0V
VDS(on)
Drain to Source On Voltage
‐‐ ‐1.0 ‐‐
‐‐ ‐0.7 ‐0.8
VGS = 0V, ID = ‐15mA
VGS = 0V, ID = ‐7mA
‐‐ ‐0.5 ‐‐
VGS = 0V, ID = ‐3mA
IDSS Drain to Source Saturation Current (Note 2) ‐15 ‐‐ ‐60 mA
VDS = ‐15V, VGS = 0V
IGSS
Gate Reverse Current
‐‐ 5 500
IG
ID(off)
ClickrDS(on)
Gate Operating Current
Drain Cutoff Current
Drain to Source On Resistance
To‐‐ ‐5 ‐‐
‐‐ ‐10 ‐‐
‐‐ ‐10 ‐500
‐‐ ‐10 ‐‐
‐‐ ‐‐ 100
2N5115 DYNAMIC ELECTRICAL CHARACTERISTICS @ 25°C (unless otherwise noted)
VGS = 20V, VDS = 0V
Buy VDS = ‐15V, ID = ‐1mA
pA VDS = ‐15V, VGS = 12V
VDS = ‐15V, VGS = 7V
VDS = ‐15V, VGS = 5V
Ω ID = ‐1mA, VGS = 0V
SYMBOL
CHARACTERISTIC
MIN TYP. MAX UNITS
CONDITIONS
gfs
Forward Transconductance
‐‐ 4.5 ‐‐ mS
VDS = ‐15V, ID = 1mA , f = 1kHz
gos
Output Conductance
‐‐ 20 ‐‐ µS
rDS(on)
Drain to Source On Resistance
‐‐ ‐‐ 100 Ω
ID = 0A, VGS = 0V, f = 1kHz
Ciss
Input Capacitance
‐‐ 20 25
VDS = ‐15V, VGS = 0V, f = 1MHz
‐‐ 5 ‐‐ pF
VDS = 0V, VGS = 12V, f = 1MHz
Crss
Reverse Transfer Capacitance
‐‐ 6 7
VDS = 0V, VGS = 7V, f = 1MHz
‐‐ 6 ‐‐
VDS = 0V, VGS = 5V, f = 1MHz
en
Equivalent Noise Voltage
‐‐
20
‐‐ nV/√Hz
VDG = 10V, ID = 10mA , f = 1kHz
2N5115 SWITCHING CHARACTERISTICS @ 25°C (unless otherwise noted)
SYMBOL
CHARACTERISTIC
UNITS
CONDITIONS
td(on)
tr
td(off)
tf
Turn On Time
Turn On Rise Time
Turn Off Time
Turn Off Fall Time
10
20
ns
8
30
VGS(L) = ‐7V
VGS(H) = 0V
See Switching Circuit
Note 1 ‐ Absolute maximum ratings are limiting values above which 2N5115 servicea b i l i t y m a y b e i m p a i r e d . N o t e 2 – P u l s e t e s t : P W ≤ 3 0 0 µ s , D u t y C y c l e ≤ 3%
2N5115 SWITCHING CIRCUIT PARAMETERS
VDD
VGG
RL
RG
ID(on)
‐6V
12V
910Ω
220Ω
‐7mA
Micross Components Europe
Available Packages:
2N5115 in TO-18
2N5115 in bare die.
Please contact Micross for full
package and die dimensions
TO-18 (Bottom View)
SWITCHING TEST CIRCUIT
Tel: +44 1603 788967
Email: [email protected]
Web: http://www.micross.com/distribution
Information furnished by Linear Integrated Systems and Micross Components is believed to be accurate and reliable. However, no responsibility is assumed for its use; nor for any infringement of patents or
other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Linear Integrated Systems.
1 Page | |||
ページ | 合計 : 1 ページ | ||
|
PDF ダウンロード | [ 2N5115 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
2N5114 | P-Channel JFET Switch | Calogic LLC |
2N5114 | SINGLE P-CHANNEL JFET | Linear Integrated Systems |
2N5114 | Switching | Micross |
2N5114 | P-Channel J-FET | Microsemi |