IX4R11 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 IX4R11
部品説明 4A Half-Bridge Driver
メーカ IXYS Corporation
ロゴ IXYS Corporation ロゴ 

Total 6 pages

No Preview Available !

IX4R11 Datasheet, IX4R11 PDF,ピン配置, 機能
4A Half-Bridge Driver
Preliminary Data Sheet
• Floating High Side Driver with boot-strap Power
supply along with a Low Side Driver.
• Fully operational to 650V
± 50V/ns dV/dt immunity
• Gate drive power supply range: 10 - 35V
• Undervoltage lockout for both output drivers
• Separate Logic power supply range: 3.3V to VCL
• Built using the advantages and compatibility
of CMOS and IXYS HDMOSTM processes
• Latch-Up protected over entire
operating range
• High peak output current: 4A
• Matched propagation delay for both outputs
• Low output impedance
• Low power supply current
• Immune to negative voltage transients
Warning: The IX4R11 is ESD sensitive.
General Description
The IX4R11 Bridge Driver for N-channel MOSFETs and IGBTs
with a high side and low side output, whose input signals
reference the low side. The High Side driver can control a
MOSFET or IGBT connected to a positive buss voltage up to
650V. The logic input stages are compatible with TTL or
CMOS, have built-in hysteresis and are fully immune to latch
up over the entire operating range. The IX4R11 can withstand
dV/dt on the output side up to ± 50V/ns.
The IX4R11 comes in either the 16-PIN SOIC package
(IX4R11S3) or the 14-PIN DIP through-hole package
• Driving MOSFETs and IGBTs in half-bridge circuits
• High voltage, high side and low side drivers
• Motor Controls
• Switch Mode Power Supplies (SMPS)
• DC to DC Converters
• Class D Switching Amplifiers
Figure 1. Typical Circuit Connection
Copyright © IXYS CORPORATION 2004
First Release

1 Page

ページ 合計 : 6 ページ
[ IX4R11.PDF ]


Link :



4A Half-Bridge Driver

IXYS Corporation
IXYS Corporation    |   2019   |  メール    |   最新    |   Sitemap