DataSheet.jp

ISL78302 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ISL78302
部品説明 Dual LDO
メーカ Intersil
ロゴ Intersil ロゴ 



Total 11 pages
		

No Preview Available !

ISL78302 Datasheet, ISL78302 PDF,ピン配置, 機能
Dual LDO with Low Noise, High Performance and Low IQ
ISL78302
Features
ISL78302 is a high performance dual LDO capable of sourcing
300mA current from each output. It has a low standby current
and is stable with output capacitance of 1µF to 10µF with ESR of
up to 200mΩ.
The device integrates an individual Power-On-Reset (POR) function for
each output. The POR delay for VO2 can be externally programmed by
connecting a timing capacitor to the CPOR pin. The POR delay for VO1 is
internally fixed at approximately 2ms. A reference bypass pin is also
provided for connecting a noise filtering capacitor for low noise and
high-PSRR applications.
The quiescent current is typically only 47µA with both LDOs
enabled and active. Separate enable pins control each individual
LDO output. When both enable pins are low, the device is in
shutdown, typically drawing less than 0.5µA.
The part operates down to 2.3V and up to 6.5V input. The typical
output voltage can be as low as 1.2V and as high as 3.3V for
each regulator. Please refer to the ordering information section
for standard options. Other voltage selections are available upon
request.
• Integrates Two 300mA High Performance LDOs
• Excellent Transient Response to Large Current Steps
• ±1.8% Accuracy Over All Operating Conditions
• Excellent Load Regulation: < 0.1% Voltage Change Across Full
Range of Load Current
• Extremely Low Quiescent Current: 47µA (Both LDOs Active)
• Wide Input Voltage Capability: 2.3V to 6.5V
• Low Dropout Voltage: Typically 300mV @ 300mA
• Low Output Noise: Typically 37µVRMS @ 100µA (1.5V)
• Stable with 1µF to 10µF Ceramic Capacitors
• Separate Enable and POR Pins for Each LDO
• Soft-start and Staged Turn-on to Limit Input Current Surge
During Enable
• Current Limit and Over-temperature Protection
• Tiny 10 Lead 3mm x 3mm DFN Package
• TS16949 Compliant
The ISL78302 is both AEC - Q100 rated and fully TS16949
compliant. The ISL78302 is rated for the automotive
temperature range (-40°C to +105°C).
• AEC - Q100 Tested
• Pb-free (RoHS Compliant)
Applications
• Radio Receivers
• Camera Modules
• GPS/Navigation
• Infotainment Systems
Typical Application
VIN (2.3 TO 6.5V)
ON
ENABLE1
OFF ON
ENABLE2
OFF
ISL78302
1
VIN
10
VO1
2
EN1
9
VO2
3
EN2
4
CBYP
POR2
POR1
8
7
5
CPOR
6
GND
C1 C2 C3
C4 C5
VOUT1
VOUT2 OK
VOUT2 TOO LOW
VOUT1 OK
VOUT2
RESET2
(200ms DELAY,
C3 = 0.01µF)
RESET1
VOUT1 TOO LOW (2ms DELAY)
www.DataSheet4U.com
C1, C4, C5: 1µF X5R CERAMIC CAPACITOR
C2: 0.01µF X7R CERAMIC CAPACITOR
C3: 0.01µF X7R CERAMIC CAPACITOR
January 28, 2011
FN7696.0
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 Page





ページ 合計 : 11 ページ
PDF
ダウンロード
[ ISL78302.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL78301

150mA Linear Regulator

Intersil
Intersil
ISL78302

Dual LDO

Intersil
Intersil
ISL78302A

Dual LDO

Intersil
Intersil
ISL78307

50mA Linear Regulator

Intersil
Intersil

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap