DataSheet.jp

AB7000 の電気的特性と機能

AB7000のメーカーは3M Electronicsです、この部品の機能は「EMI Absorber」です。


製品の詳細 ( Datasheet PDF )

部品番号 AB7000
部品説明 EMI Absorber
メーカ 3M Electronics
ロゴ 3M Electronics ロゴ 




このページの下部にプレビューとAB7000ダウンロード(pdfファイル)リンクがあります。

Total 2 pages

No Preview Available !

AB7000 Datasheet, AB7000 PDF,ピン配置, 機能
3MEMI Absorber AB7000 Series
Data Sheet
February 2009
Description
Agency Approvals
& Self Certifications
Applications
Attenuation and
Power Loss
Typical Properties
3M™ EMI Absorber AB7000 Series consists of a flexible polymer resin loaded with soft
metal flakes. An acrylic pressure-sensitive adhesive allows for easy application.
Flexible, high permeability magnetic sheets
One-sided acrylic pressure-sensitive adhesive
Easily die cut into complex shapes
RoHS 2002/95/EC
RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of the
maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2002/618/EC, unless the
substance is in an application that is exempt under RoHS. This information represents 3M’s knowledge and belief, which may be
based in whole or in part on information provided by third party suppliers to 3M.
AB7000 absorber is typically used for applications requiring EMI control and signal
integrity improvement in the 50MHz to 10 GHz range. It is a broadband EMI
absorber designed to work in near-field applications inside and around electronic
devices and assemblies. Common applications include reduction of noise and
crosstalk inside mobile electronics, reduction of crosstalk and EMI on ribbon cables
and flex cables, reduction of radiated IC noise (applying absorber directly to the
noisy IC), damping of radiation and oscillations inside shields and cavities, and
increasing signal integrity on high speed data lines through crosstalk reduction.
Many factors determine the true attenuation of an electromagnetic interference
absorbing material, including shape and thickness, intimacy of substrate contact,
smoothness of application surface, strength and frequency of the EMI signal, etc.
Since AB7000 absorber is a near field absorber, attenuation characteristics tend to
be very application specific. Power loss characteristics are measured using a 5cm x
5cm square of AB7000 placed on a 50microstrip line. The attenuation and noise
dampening attained generally increases as the thickness of the material increases.
Not for specifications. Values are typical, not to be considered minimum or maximum.
Properties measured at room temperature 73°F (~23°C ) unless otherwise stated.
Physical Property (Test Method)
Typical Value
Adhesive
Acrylic non-conductive pressure-sensitive adhesive (PSA)
Type of Backing
Polymer resin with magnetic metal flake filler
Product Number
AB7010
AB7020
AB7030
AB7050
Backing Thickness
0.10mm
0.20mm
0.30mm
0.50mm
Adhesive Thickness
0.03mm
0.05mm
0.05mm
0.05mm
Standard packaging
210mm x 297mm
www.DataSheet4U.com
Temperature Range
-25°to 85°C
Surface resistivity (ASTM-257)
1x10 6(min)
Initial Permeability1
110
Typical Performance2
Refer to S11 attenuation and power loss graphs
Notes: 1. This value measured at 1MHz 3M TM K RD-EMC-AB-02.
2. Attenuation is measured by 7mm coaxial verification kit under short fixed condition. Power loss is
measured by a 50microstrip line method. 3M TM K-RD-EMC-AB-01
31 of 2

1 Page







ページ 合計 : 2 ページ
 
PDF
ダウンロード
[ AB7000 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AB7000

EMI Absorber

3M Electronics
3M Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap