No Preview Available !
Absolute-Encoder CEV 65 S/M - PN
i
Eglishalde 6
D-78647 Trossingen
Tel. +49 - (0) 74 25 / 228 - 0
Fax +49 - (0) 74 25 / 228 - 33
http://www.tr-electronic.de
Germany
• PROFINET IO interface
• Type with solid shaft
• Modular product line
• Extensive parameter setting possibilities
• Special parameters upon request
• Further interfaces available
• Modular construction for mechanical
customizations
5.A
Characteristics
Supply voltage........................................................................11…27 VDC
Current consumption without load .........................................< 350 mA
Total resolution 1)....................................................................Multi-Turn: ≤ 25 Bit, Single-Turn: ≤ 13 Bit
Number of steps/revolution 1) .................................................≤ 8.192
Number of revolutions 1) .........................................................Multi-Turn: ≤ 4.096, Single-Turn: 1
Profinet IO – Device ...............................................................IEC 61158, IEC 61784-1
- Physical Layer ...............................................................PROFINET 100Base-TX, Fast Ethernet, ISO/IEC 8802-3
- Output code ...................................................................Binary
- Cycle time 1)...................................................................≥ 1 ms (IRT / RT)
- Transmission rate ..........................................................10 Mbit/s, 100 Mbit/s
- Transmission .................................................................CAT-5 cable, shielded (STP), ISO/IEC 11801
- Addressing 1)..................................................................Per Name (name allocation about engineering tool).
Assignment Name --> MAC during system boot
- Real-Time-Classes 1) .....................................................RT Class 1 Frames (RT), RT Class 3 Frames (IRT)
- Parameter 1)...................................................................Switch-over count direction, Scaling function, Preset adjustment
Mechanically permissible speed ............................................≤ 6.000 min-1
Shaft load, at the shaft end ....................................................≤ 40 N axial, ≤ 60 N radial
Bearing life time .....................................................................≥ 3.9 * 1010 revolutions at
- Speed ............................................................................≤ 3.000 min-1
- Operating temperature ..................................................≤ 60 °C
- Shaft load, at the shaft end............................................≤ 20 N axial, ≤ 30 N radial
Permissible angular acceleration ...........................................≤ 104 rad/s2
Moment of inertia ...................................................................typically 2.5 * 10-6 kg m2
Start-up torque at 20°C ..........................................................typically 2 Ncm
Mass.......................................................................................typically 0.7 kg
1) programmable parameter
www.DataSheet4U.com
11/07
Revision 00
Subject to change
CEV65-PN-1-GB-2-00.DOC
©TR-Electronic GmbH
5.A - 1
CEV65-PN-1-GB-2