DataSheet.jp

UUD1V220MCL1GS PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 UUD1V220MCL1GS
部品説明 Aluminum Electrolytic Capacitors
メーカ Nichicon
ロゴ Nichicon ロゴ 



Total 2 pages
		

No Preview Available !

UUD1V220MCL1GS Datasheet, UUD1V220MCL1GS PDF,ピン配置, 機能
ALUMINUM ELECTROLYTIC CAPACITORS
UD Chip Type, Low Impedance
series
Chip type, low impedance temperature range up to +105°C.
Designed for surface mounting on high density PC board.
Applicable to automatic mounting machine using carrier tape.
UD
Low Impedance WG
Specifications
Item
Performance Characteristics
Category Temperature Range – 55 ~ +105°C
Rated Voltage Range
6.3 ~ 50V
Rated Capacitance Range 1 ~ 1500µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), whichever is greater.
tan δ
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
6.3
10
16
25
35
50
tan δ (MAX.) 0.26 (0.28) 0.20 (0.24) 0.16 (0.20) 0.14 (0.16) 0.12 (0.14) 0.12 (0.14)
( ) is φ8 over
Measurement frequency : 120Hz
Rated voltage (V)
6.3 10 16 25 35 50
Stability at Low Temperature Impedance ratio Z– 25°C / Z+20°C
3
2
2
2
2
2
ZT / Z20 (MAX.) Z– 55°C / Z+20°C
5
4
4
3
3
3
Endurance
Shelf Life
Resistance to soldering
heat
Marking
After 5000 hours' (2000 hours for φD 6.3)
application of rated voltage at 105°C , capacitors
meet the characteristic requirements listed at
right.
Capacitance change
tan δ
Leakage current
Within ±30% of initial value
200% or less of initial specified value
Initial specified value or less
After leaving capacitors under no load at 105°C for 1000 hours,
they meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Capacitance change
tan δ
Leakage current
Black print on the case top.
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Chip Type
(φ4 ~ 6.3)
Voltage (C:16V)
Series
Plastic platform
0.3 MAX.
C±0.2
Positive
Lot No.
Capacitance
(φ8, φ10×10L)
Voltage (V:35V)
Series
Trade mark
L±0.3
H
Plastic platform
0.3 MAX.
C±0.2
Negative
Positive
Lot No.
Capacitance
L±0.5
Pressure relief vent
Voltage
V 6.3 10 16 25 35 50
Code j A C E V H
Dimension table in next page.
www.DataSheet.in
Negative
H
Type numbering system (Example : 16V 22µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
UUD 1C 2 2 0 M CR 1GS
Package code
Configuration
Capacitance tolerance (±20%)
Rated Capacitance (22µF)
Rated voltage (16V)
D×L
4 ~ 6.3
8 10
Code
CR
NR
Series name
Type
The lead-free product is also available upon request.
In this case, L will be put at 11th digit of type numbering system.
(mm)
4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 10 × 10
A 1.8 2.1 2.4 2.4 2.9 3.2
B 4.3 5.3 6.6 6.6 8.3 10.3
C 4.3 5.3 6.6 6.6 8.3 10.3
E 1.0 1.3 2.2 2.2 3.1 4.5
L 5.8 5.8 5.8 7.7 10 10
H 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1
CAT.8100S

1 Page





ページ 合計 : 2 ページ
PDF
ダウンロード
[ UUD1V220MCL1GS.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
UUD1V220MCL1GS

Aluminum Electrolytic Capacitors

Nichicon
Nichicon

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap