|
|
PDF W78L054C Data sheet ( Hoja de datos )
| Número de pieza | W78L054C | |
| Descripción | 8-BIT MICROCONTROLLER | |
| Fabricantes | Winbond | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de W78L054C (archivo pdf) en la parte inferior de esta página. Total 22 Páginas | ||
|
No Preview Available !
W78LE54C/W78L054C
8-BIT MICROCONTROLLER
Table of Contents-
1. GENERAL DESCRIPTION ......................................................................................................... 2
2. FEATURES ................................................................................................................................. 2
3. PIN CONFIGURATIONS ............................................................................................................ 3
4. PIN DESCRIPTION..................................................................................................................... 4
5. FUNCTIONAL DESCRIPTION ................................................................................................... 5
6. SECURITY BITS ....................................................................................................................... 10
7. ABSOLUTE MAXIMUM RATINGS ........................................................................................... 11
8. DC CHARACTERISTICS.......................................................................................................... 12
9. AC CHARACTERISTICS .......................................................................................................... 14
10. TIMING WAVEFORMS ............................................................................................................. 16
11. TYPICAL APPLICATION CIRCUITS ........................................................................................ 18
12. PACKAGE DIMENSIONS ......................................................................................................... 20
13. REVISION HISTORY ................................................................................................................ 22
www.DataSheet.in
Publication Release Date: December 4, 2006
- 1 - Revision A3
1 page  
W78LE54C/W78L054C
5. FUNCTIONAL DESCRIPTION
The W78L054C architecture consists of a core controller surrounded by various registers, five general
purpose I/O ports, 256 bytes of RAM, three timer/counters, and a serial port. The processor supports
111 different opcodes and references both a 64K program address space and a 64K data storage
space.
Timers 0, 1, and 2
Timers 0, 1, and 2 each consist of two 8-bit data registers. These are called TL0 and TH0 for Timer 0,
TL1 and TH1 for Timer 1, and TL2 and TH2 for Timer 2. The TCON and TMOD registers provide
control functions for timers 0 and 1. The T2CON register provides control functions for Timer 2.
RCAP2H and RCAP2L are used as reload/capture registers for Timer 2.
The operations of Timer 0 and Timer 1 are the same as in the W78C51. Timer 2 is a special feature
of the W78L054C: it is a 16-bit timer/counter that is configured and controlled by the T2CON register.
Like Timers 0 and 1, Timer 2 can operate as either an external event counter or as an internal timer,
depending on the setting of bit C/T2 in T2CON. Timer 2 has three operating modes: capture, auto-
reload, and baud rate generator. The clock speed at capture or auto-reload mode is the same as that
of Timers 0 and 1.
New Defined Peripheral
In order to be more suitable for I/O, an extra 4-bit bit-addressable port P4 and two external interrupt
INT2 , INT3 has been added to either the PLCC or QFP 44 pin package. And description follows:
1. INT2 / INT3
Two additional external interrupts, INT2 and INT3 , whose functions are similar to those of external
interrupt 0 and 1 in the standard 80C52. The functions/status of these interrupts are
determined/shown by the bits in the XICON (External Interrupt Control) register. The XICON register is
bit-addressable but is not a standard register in the standard 80C52. Its address is at 0C0H. To
set/clear bits in the XICON register, one can use the "SETB (/CLR) bit" instruction. For example,
"SETB 0C2H" sets the EX2 bit of XICON.
XICON - external interrupt control (C0H)
PX3 EX3
IE3
IT3 PX2 EX2 IE2
IT2
PX3: External interrupt 3 priority high if set
EX3: External interrupt 3 enable if set
IE3: If IT3 = 1, IE3 is set/cleared automatically by hardware when interrupt is detected/serviced
IT3: External interrupt 3 is falling-edge/low-level triggered when this bit is set/cleared by software
PX2: External interrupt 2 priority high if set
EX2: External interrupt 2 enable if set
IE2: If IT2 = 1, IE2 is set/cleared automatically by hardware when interrupt is detected/serviced
IT2: External interrupt 2 is falling-edge/low-level triggered when this bit is set/cleared by software
www.DataSheet.in
Publication Release Date: December 4, 2006
- 5 - Revision A3
5 Page 
W78LE54C/W78L054C
7. ABSOLUTE MAXIMUM RATINGS
PARAMETER
DC Power Supply
Input Voltage
Operating Temperature
Storage Temperature
SYMBOL
VDD−VSS
VIN
TA
TST
MIN.
-0.3
VSS -0.3
0
-55
MAX.
+7.0
VDD +0.3
70
+150
UNIT
V
V
°C
°C
Note: Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability
of the device.
www.DataSheet.in
- 11 -
Publication Release Date: December 4, 2006
Revision A3
11 Page | ||
| Páginas | Total 22 Páginas | |
| PDF Descargar | [ Datasheet W78L054C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| W78L054A | 8-BIT MICROCONTROLLER | Winbond |
| W78L054C | 8-BIT MICROCONTROLLER | Winbond |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |