DataSheet.jp

16PS180MH11 の電気的特性と機能

16PS180MH11のメーカーはNippon Chemi-Conです、この部品の機能は「Functional Polymer Capacitors」です。


製品の詳細 ( Datasheet PDF )

部品番号 16PS180MH11
部品説明 Functional Polymer Capacitors
メーカ Nippon Chemi-Con
ロゴ Nippon Chemi-Con ロゴ 




このページの下部にプレビューと16PS180MH11ダウンロード(pdfファイル)リンクがあります。

Total 10 pages

No Preview Available !

16PS180MH11 Datasheet, 16PS180MH11 PDF,ピン配置, 機能
Messrs. NDB
Issue date: Sep. 25, 2002
Specification No.: 2FTGP41Z1
Functional Polymer Capacitors
Specifications
Customer Part No.:
Customer Specification No. :
Nippon Chemi-Con Part No. : PS Series
Nippon Chemi-Con Corporation
PS Manufacturing Section Engineering Group
Manager
Shinichi Kaneko
Receipt Stamp
www.DataSheet.in
Nippon Chemi-Con Corporation
SIB SP-32-2000029 1/10

1 Page





16PS180MH11 pdf, ピン配列
+20±2°C, 60 to 70%RH and 86 to 106kPa.The test conditions shall comply with JIS C5101-1 1998
3.1 Capacitance(Cap.)
[Conditions] Measuring frequency
: 120Hz±20%
Measuring voltage
: 0.5Vrms max. +1.5 to 2.0Vdc
Measuring circuit
: Series equivalent circuit
[Criteria]
Capacitance shall be within the specified tolerance.
3.2 Tangent of loss angle (tan)
[Conditions] Measuring frequency
Measuring voltage
Measuring circuit
[Criteria]
0.12 max.
: 120Hz±20%
: 0.5Vrms max. +1.5 to 2.0Vdc
: Series equivalent circuit
3.3 Leakage current (L.C.)
[Conditions] DC leakage current shall be measured with rated voltage, which is applied
through a resistor of 1,000±10connected in series with the capacitors, at the
end of a specified period of 2 minutes after the capacitors reached the rated
voltage across the terminals.
[Criteria] I = 0.2CV max
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated
voltage(V).
3.4 ESR
[Conditions] Measuring frequency
: 100kHz±20%
Measuring voltage
: 0.5Vrms max. +1.5 to 2.0Vdc
Measuring circuit
: Series equivalent circuit
[Criteria]
ESR shall not exceed the specified value.
3.5 Temperature characteristics
[Conditions]
Step1: Measure impedance at +20±2°C, 100kHz±20%
Step2: Measure impedance at -25±2°C, 100kHz±20%
Step3: Measure impedance at -55±2°C, 100kHz±20%
[Criteria]
Impedance ratio of the -25°C and -55°C values to the +20%°C values shall be
not xceed the following values.
Z-25°C / Z+20°C = 1.15
Z-55°C / Z+20°C = 1.25
www.DataSheet.in
Nippon Chemi-Con Corporation
SIB SP-32-2000029 3/10


3Pages


16PS180MH11 電子部品, 半導体
4.2 Cleaning of assembly boards
Acceptable cleaning conditions
For higher alcohol system cleaning agents, capacitors are capable of withstanding immersion or
ultrasonic cleaning within 10 minutes at a maximum temperature of 60°C. The wash, rinse and
drying process should be so arranged that other components and pc boards cannot rub off the marking
of the capacitor. Especially note that shower cleaning can affect the marking.
Higher alcohol system cleaning agents, recommended:
Pine Alpha ST-100S
Clean Through 750H, 750K, 750L, and 710M
Technocare FRW-14 to 17
* Other cleaning agents:
A terpene or petroleum system solvent swells and damages the rubber seal materials of a capacitor, so
that the life of the capacitor can be shortened. An alkaline saponification detergent, which has high
pH, erodes an aluminum metal or washes away the marking. Consequently, do not use all these
cleaning agents.
For CFCs substitute, Asahi Glass AK225AES solvent is recommended to use only for Solvent-Proof
type capacitors, which are especially designed. The Solvent-Proof type capacitors are capable of
withstanding any one of immersion, ultrasonic or vapor cleaning within 5 minutes as acceptable
cleaning conditions for the AK225AES solvent.
From the environmental point of view, however, do not use the CFCs substitute solvent as much as
possible.
IPA (Isopropyl alcohol) is usually one of the acceptable cleaning agents. Flux concentration in the IPA
cleaning agent should be controlled at a maximum limit of 2wt.%, because the halogenide ions in flux
can dissolve in the cleaning agent.
www.DataSheet.in
Nippon Chemi-Con Corporation
SIB SP-32-2000029 6/10

6 Page



ページ 合計 : 10 ページ
 
PDF
ダウンロード
[ 16PS180MH11 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
16PS180MH11

Functional Polymer Capacitors

Nippon Chemi-Con
Nippon Chemi-Con


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap