|
|
FS-V3xのメーカーはKEYENCE CORPORATIONです、この部品の機能は「Digital Fiber Optic Sensors」です。 |
部品番号 | FS-V3x |
| |
部品説明 | Digital Fiber Optic Sensors | ||
メーカ | KEYENCE CORPORATION | ||
ロゴ | |||
このページの下部にプレビューとFS-V3xダウンロード(pdfファイル)リンクがあります。 Total 26 pages
NEW Digital Fiber Optic Sensor
FS-V30 Series
Fiber Optic Sensors
The New Standard in Simplicity
www.DataSheet.in
1 Page FS-V30 Ma in Fe a t ure s
World's most powerful beam
times more powerful beam
than conventional models
Stable detection in harsh environments.
Longer detecting distance with miniaturized fibers.
Received light intensity
Max display 64,512
MEGA
16-bit
64times
higher
FINE
12-bit
0 10,000 20,000 30,000 40,000 50,000 60,000
World's first power booster switch
Easy power control
The highest power setting can be selected with a DIP switch.
Set button
Manual button
DIP switch
World's first automatic setting value tracking function
Not affected by environmental
changes over time
Equipped with the DSC Function which
adjusts the setting value as it tracks
the current value in real time.
Received light
intensity
Current value
Setting value
Conventional Sensors cannot adjust the SET
value and will fail if the received light intensity
drops too low due to dirt or misalignment
DSC automatically
adjusts the SET value based
on decreased light intensity
due to dirt or misalignment
Adjustment in real time
Fixed setting value
(conventional)
DSC Function
Setting Value
(FS-V30)
Time
3
Program memory
Reload your application settings
Operators or users may accidentally change
the settings on the FS. In this case, conventional
models require resetting. The FS-V30 saves
your settings into memory for fast recovery.
Saving your settings
Load the settings
www.DataSheet.in
3Pages FS-V30 Ne w Fe atu re s
New Sensor Options
oooooooooooooooooooooooooooooooooooooooooooooooooo
Wide variety
Various amplifier designs applicable to any job.
1-output [NEW]
M8 connector
FS-V31C(P)
FS-V32C(P)
2-output [NEW]
M8 connector
FS-V33C(P)
FS-V34C(P)
Analog output [NEW]
FS-V31M
Cable [NEW]
6 FS-V31(P)
FS-V32(P)
Cable [NEW]
FS-V33(P)
FS-V34(P)
ON/OFF
2-output type Output 1 is used for detection. Output 2 can be selected to output
when a counter, alarm or limit has been reached.
Analog output type Outputs 1 to 5 V according to the detection quantity (digital display).
It can be used for a wide range of applications such as position control or multi-level detection.
M8 connector type is also available.
analog
www.DataSheet.in
6 Page | |||
ページ | 合計 : 26 ページ | ||
|
PDF ダウンロード | [ FS-V3x データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
FS-V30 | Digital Fiber Optic Sensors | KEYENCE CORPORATION |
FS-V3x | Digital Fiber Optic Sensors | KEYENCE CORPORATION |