|
|
PDF HMC-APH403 Data sheet ( Hoja de datos )
| Número de pieza | HMC-APH403 | |
| Descripción | GaAs HEMT MMIC POWER AMPLIFIER | |
| Fabricantes | Hittite Microwave Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HMC-APH403 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
v03.0209
Typical Applications
This HMC-APH403 is ideal for:
• Point-to-Point Radios
3 • Point-to-Multi-Point Radios
• Military & Space
HMC-APH403
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 37 - 45 GHz
Features
Output IP3: +32 dBm
P1dB: +23 dBm
Gain: 21 dB
Supply Voltage: +5V
50 Ohm Matched Input/Output
Die Size: 2.76 x 1.03 x 0.1 mm
Functional Diagram
General Description
The HMC-APH403 is a three stage GaAs HEMT MMIC
Medium Power Amplifier which operates between
37 and 45 GHz. The HMC-APH403 provides 21 dB
of gain, and an output power of +23 dBm at 1 dB
compression from a +5V supply voltage. All bond
pads and the die backside are Ti/Au metallized and
the amplifier device is fully passivated for reliable
operation. The HMC-APH403 GaAs HEMT MMIC
Medium Power Amplifier is compatible with conven-
tional die attach methods, as well as thermocomp-
ression and thermosonic wire bonding, making it
ideal for MCM and hybrid microcircuit applications.
All data Shown herein is measured with the chip in a
50 Ohm environment and contacted with RF probes.
Electrical Specifications ,[1] TA = +25° C
Vdd1=Vdd2=Vdd3= 5V, Idd1+ Idd2 + Idd3= 475 mA [2]]
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output Power for 1 dB Compression (P1dB)
Output Third Order Intercept (IP3)
Supply Current (Idd1 + Idd2 + Idd3)
[1] Unless otherwise indicated, all measurements are from probed die
[2] Adjust Vgg1=Vgg2=Vgg3 between -1V to +0.3V (typ -0.5V) to achieve Iddtotal = 475 mA
Min
19
22
Typ
37 - 45
21
6
7
23
32
475
Max
Units
GHz
dB
dB
dB
dBm
dBm
mA
3 - 166
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
1 page  
v03.0209
Assembly Diagram
3
HMC-APH403
GaAs HEMT MMIC MEDIUM POWER
AMPLIFIER, 37 - 45 GHz
Note 1: Bypass caps should be 100 pF ceramic (single-layer) placed no further than 30 mils from the amplifier
Note 2: Best performance obtained from use of <10 mil (long) by 3 by 0.5 mil ribbons on input and output.
3 - 170
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet HMC-APH403.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HMC-APH403 | GaAs HEMT MMIC POWER AMPLIFIER | Hittite Microwave Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |