DataSheet.jp

UG1094 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 UG1094
部品説明 BNC Type Connectors
メーカ DDK
ロゴ DDK ロゴ 



Total 13 pages
		

No Preview Available !

UG1094 Datasheet, UG1094 PDF,ピン配置, 機能
BNC Series
BNC Type Connectors
www.DataSheet4U.com
BNC series is most widely used as 50 Ω coaxial
cable connectors.
This series is used specially for interface of fre-
quent fit-in/pull-out instruments by small size/
light weight bayonet lock mechanism.
Note:
BNC series is intermateable with BNC75 series.
(75Ω group)
If 75 Ω cable is used for this series, the fre-
quency to be applied must be below 200MHz.
For more than 200MHz, BNC75 series must be
used.
CONFORMING STANDARD
JIS-C-5412、 MIL-C-39012、 DSP-C-6202、 NTTSpec No.2095
SPECIFICATION
Characteristic Impedance
50Ω
Dielectric withstanding voltage 1500V AC (rms) for 1 minute
Insulation resistance
1000MΩmin. at 500V DC
Contact resistance
3mΩ max.
VSWR
1.3max. at DC~2GHz
Specifications depends on each connector although these are basic specifications.
MATERIAL/FINISH
Shell (Body)
Contact (male)
Contact (female)
Insulators
Gaskets
Copper alloy/Silver or Nickel plating
Copper alloy/Silver or Gold plating
Copper alloy/Silver or Gold plating
PTFE
Silicone rubber
Please ask us for the cable assemblies to assure its performance.
 1

1 Page





ページ 合計 : 13 ページ
PDF
ダウンロード
[ UG1094.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
UG1094

BNC Type Connectors

DDK
DDK

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap