|
|
Número de pieza | E11J1 | |
Descripción | OSCILLATOR | |
Fabricantes | ECLIPTEK | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de E11J1 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! www.DataSheet4U.com
Marketing Bulletin
DATE: August 25, 2005
TO: All Sales Personnel
FROM: Mark Stoner
RE: Product Termination
To all concerned parties,
This bulletin is to notify all customers of the discontinuation of the following Ecliptek
series effective August 25th, 2005:
Series
E11J1
E13J1
Description
5V 4 pad SMD LVPECL Oscillator
3.3V 4 pad SMD LVPECL Oscillator
Recommended Replacement
E13C7
E13C7
In compliance with our End of Life (EOL) policy, this will serve as advanced notice of
product termination. New orders will not be accepted after November 25th, 2005, with
delivery to conclude by February 25th 2006.
If there are any questions pertaining to this bulletin, please fell free to contact me.
Thank you again for your cooperation.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234
1 page PART NUMBERING GUIDE
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
E13J1 F 2 C - 155.520M TR
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
C=Complementary Output
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TOP VIEW
SIDE VIEW
FRONT VIEW
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Complementary Output, No Connect, or Enable/Disable
Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances = ±0.1
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Fine Leak Test
Gross Leak Test
Mechanical Shock
Vibration
Solderability
Temperature Cycling
Resistance to Soldering Heat
Resistance to Solvents
Specification
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 2002
MIL-STD-883, Method 1010
MIL-STD-202, Method 210
MIL-STD-202, Method 215
OBSOLETE
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13J1
PACKAGE
4-PCB-J
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
VOLTAGE
3.3V
CLASS
OS69
REV.DATE
01/03
800-ECLIPTEK www.ecliptek.com for latest revision 165 Specifications subject to change without notice.
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet E11J1.PDF ] |
Número de pieza | Descripción | Fabricantes |
E11J1 | OSCILLATOR | ECLIPTEK |
E11J2 | OSCILLATOR | ECLIPTEK |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |