|
|
BTB16-700BW3GのメーカーはON Semiconductorです、この部品の機能は「Triacs Silicon Bidirectional Thyristors」です。 |
部品番号 | BTB16-700BW3G |
| |
部品説明 | Triacs Silicon Bidirectional Thyristors | ||
メーカ | ON Semiconductor | ||
ロゴ | |||
このページの下部にプレビューとBTB16-700BW3Gダウンロード(pdfファイル)リンクがあります。 Total 6 pages
BTB16-600BW3G,
BTB16-700BW3G,
BTB16-800BW3G
www.DataSheet4U.com
Triacs
Silicon Bidirectional Thyristors
Designed for high performance full-wave ac control applications
where high noise immunity and high commutating di/dt are required.
Features
• Blocking Voltage to 800 V
• On-State Current Rating of 16 A RMS at 80°C
• Uniform Gate Trigger Currents in Three Quadrants
• High Immunity to dV/dt − 1500 V/ms minimum at 125°C
• Minimizes Snubber Networks for Protection
• Industry Standard TO-220AB Package
• High Commutating dI/dt − 7.5 A/ms minimum at 125°C
• These are Pb−Free Devices
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Peak Repetitive Off−State Voltage (Note 1)
(TJ = −40 to 125°C, Sine Wave,
50 to 60 Hz, Gate Open)
BTB16−600BW3G
BTB16−700BW3G
BTB16−800BW3G
VDRM,
VRRM
600
700
800
Unit
V
On-State RMS Current
(Full Cycle Sine Wave, 60 Hz, TC = 80°C)
Peak Non-Repetitive Surge Current
(One Full Cycle Sine Wave, 60 Hz,
TC = 25°C)
Circuit Fusing Consideration (t = 8.3 ms)
IT(RMS)
ITSM
I2t
16 A
170 A
120 A2sec
Non−Repetitive Surge Peak Off−State
Voltage (TJ = 25°C, t = 8.3 ms)
VDSM/
VRSM
VDSM/VRSM
+100
V
Peak Gate Current (TJ = 125°C, t ≤ 20 ms) IGM 4.0 A
Average Gate Power (TJ = 125°C)
PG(AV)
1.0
W
Operating Junction Temperature Range
TJ −40 to +125 °C
Storage Temperature Range
Tstg −40 to +150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
http://onsemi.com
TRIACS
16 AMPERES RMS
600 thru 800 VOLTS
MT2
MT1
G
4 MARKING
DIAGRAM
123
x
A
Y
WW
G
TO−220AB
CASE 221A
STYLE 4
BTB16−xBWG
AYWW
= 6, 7 or 8
= Assembly Location
= Year
= Work Week
= Pb−Free Package
PIN ASSIGNMENT
1 Main Terminal 1
2 Main Terminal 2
3 Gate
4 Main Terminal 2
ORDERING INFORMATION
Device
BTB16−600BW3G
Package
TO−220AB
(Pb−Free)
Shipping
50 Units / Rail
BTB16−700BW3G TO−220AB 50 Units / Rail
(Pb−Free)
BTB16−800BW3G TO−220AB 50 Units / Rail
(Pb−Free)
*For additional information on our Pb−Free strategy and
soldering details, please download the ON Semicon-
ductor Soldering and Mounting Techniques Reference
Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2009
May, 2009 − Rev. 2
1
Publication Order Number:
BTB16−600BW3/D
1 Page Symbol
VDRM
IDRM
VRRM
IRRM
VTM
IH
BTB16−600BW3G, BTB16−700BW3G, BTB16−800BW3G
Voltage Current Characteristic of Triacs
(Bidirectional Device)
www.DataSheet4U.com
+ Current
Parameter
Peak Repetitive Forward Off State Voltage
Peak Forward Blocking Current
Peak Repetitive Reverse Off State Voltage
Peak Reverse Blocking Current
Maximum On State Voltage
Holding Current
IRRM at VRRM
on state
IH
Quadrant 3
MainTerminal 2 −
VTM
VTM
IH
Quadrant 1
MainTerminal 2 +
off state
+ Voltage
IDRM at VDRM
Quadrant Definitions for a Triac
MT2 POSITIVE
(Positive Half Cycle)
+
(+) MT2
(+) MT2
Quadrant II
IGT −
(−) IGT
GATE
MT1
REF
(−) MT2
(+) IGT
GATE
MT1
REF
(−) MT2
Quadrant I
+ IGT
Quadrant III
(−) IGT
GATE
MT1
REF
(+) IGT
GATE
MT1
REF
Quadrant IV
−
MT2 NEGATIVE
(Negative Half Cycle)
All polarities are referenced to MT1.
With in−phase signals (using standard AC lines) quadrants I and III are used.
http://onsemi.com
3
3Pages BTB16−600BW3G, BTB16−700BW3G, BTB16−800BW3G
PACKAGE DIMENSIONS
www.DataSheet4U.com
TO−220
CASE 221A−07
ISSUE AA
BF
Q
H
Z
4
123
A
K
L
V
G
N
D
T
U
−T−
SEATING
PLANE
C
S
R
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
INCHES
DIM MIN MAX
A 0.570 0.620
B 0.380 0.405
C 0.160 0.190
D 0.025 0.035
F 0.142 0.147
G 0.095 0.105
H 0.110 0.155
J 0.014 0.022
K 0.500 0.562
L 0.045 0.060
N 0.190 0.210
Q 0.100 0.120
R 0.080 0.110
S 0.045 0.055
T 0.235 0.255
U 0.000 0.050
V 0.045 ---
Z --- 0.080
MILLIMETERS
MIN MAX
14.48 15.75
9.66 10.28
4.07 4.82
0.64 0.88
3.61 3.73
2.42 2.66
2.80 3.93
0.36 0.55
12.70 14.27
1.15 1.52
4.83 5.33
2.54 3.04
2.04 2.79
1.15 1.39
5.97 6.47
0.00 1.27
1.15 ---
--- 2.04
STYLE 4:
PIN 1.
2.
3.
4.
MAIN TERMINAL 1
MAIN TERMINAL 2
GATE
MAIN TERMINAL 2
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
BTB16−600BW3/D
6 Page | |||
ページ | 合計 : 6 ページ | ||
|
PDF ダウンロード | [ BTB16-700BW3G データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
BTB16-700BW3G | Triacs | Littelfuse |
BTB16-700BW3G | Triacs Silicon Bidirectional Thyristors | ON Semiconductor |