DataSheet.jp

7WBD3305 の電気的特性と機能

7WBD3305のメーカーはON Semiconductorです、この部品の機能は「2-Bit Translating Bus Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号 7WBD3305
部品説明 2-Bit Translating Bus Switch
メーカ ON Semiconductor
ロゴ ON Semiconductor ロゴ 




このページの下部にプレビューと7WBD3305ダウンロード(pdfファイル)リンクがあります。

Total 12 pages

No Preview Available !

7WBD3305 Datasheet, 7WBD3305 PDF,ピン配置, 機能
7WBD3305
2-Bit Translating Bus
Switch
The 7WBD3305 is an advanced high−speed low−power 2−bit
translating bus switch in ultra−small footprints.
Features
High Speed: tPD = 0.25 ns (Max) @ VCC = 4.5 V
3 W Switch Connection Between 2 Ports
Power Down Protection Provided on Inputs
Zero Bounce
TTL−Compatible Control Inputs
Ultra−Small Pb−Free Packages
These are Pb−Free Devices
http://onsemi.com
8
1
UDFN8
MU SUFFIX
CASE 517AJ
MARKING
DIAGRAMS
AJM
G
UDFN8
1.95 x 1.0
CASE 517CA
1
XM
8
Micro8]
DM SUFFIX
CASE 846A
D125
AYWG
G
1
18
UQFN8
MU SUFFIX
CASE 523AN
1
AG M*G
G
US8
US SUFFIX
CASE 493
8
AE M*G
G
1
A = Assembly Location
Y = Year
W = Work Week
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending
upon manufacturing location.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
© Semiconductor Components Industries, LLC, 2014
October, 2014 − Rev. 2
1
Publication Order Number:
7WBD3305/D

1 Page





7WBD3305 pdf, ピン配列
7WBD3305
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC
VIN
VI/O
IIK
IOK
IO
ICC
IGND
TSTG
TL
TJ
qJA
DC Supply Voltage
Control Pin Input Voltage
Switch Input / Output Voltage
Control Pin DC Input Diode Current
Switch I/O Port DC Diode Current
ON−State Switch Current
Continuous Current Through VCC or GND
DC Supply Current Per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Thermal Resistance
VIN < GND
VI/O < GND
US8 (Note 1)
UDFN8
UQFN8
Micro8
−0.5 to +7.0
−0.5 to +7.0
−0.5 to +7.0
−50
−50
$128
$150
$150
$150
−65 to +150
260
150
251
111
208
392
V
V
V
mA
mA
mA
mA
mA
mA
°C
°C
°C
°C/W
PD Power Dissipation in Still Air at 85°C
US8
UDFN8
UQFN8
Micro8
498
1127
601
319
mW
MSL
Moisture Sensitivity
Level 1
FR
VESD
Flammability Rating Oxygen Index: 28 to 34
ESD Withstand Voltage
Human Body Mode (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
UL 94 V−0 @ 0.125 in
> 2000
> 200
N/A
V
ILATCHUP
Latchup Performance Above VCC and Below GND at 125°C (Note 5)
$200
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min Max Unit
VCC
VIN
VI/O
TA
Dt/DV
Positive DC Supply Voltage
Control Pin Input Voltage
Switch Input / Output Voltage
Operating Free−Air Temperature
Input Transition Rise or Fall Rate
Control Input
Switch I/O
4.0 5.5 V
0 5.5 V
0 5.5 V
−55
+125
°C
0 5 nS/V
0 DC
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
http://onsemi.com
3


3Pages


7WBD3305 電子部品, 半導体
7WBD3305
AC LOADING AND WAVEFORMS
Parameter Measurement Information
From Output
Under Test
500 W
S1
CL = 50 pF*
500 W
7V
Open
GND
Test
tPD
tPLZ/tPZL
tPHZ/tPZH
S1
Open
7V
Open
*CL includes probes and jig capacitance.
Input
tPLH
1.5 V
Output
1.5 V
1.5 V
3V
0V
tPHL
VOH
1.5 V
VOL
Voltage Waveforms
Propagation Delay Times
Output
Control
tPZL
Output
Waveform 1
S1 at 7 V
(Note 6)
tPZH
Output
Waveform 2
S1 at Open
(Note 6)
1.5 V
1.5 V
1.5 V
3V
1.5 V
0V
tPLZ
3.5 V
VOL + 0.3 V
VOL
tPHZ
VOH
VOH − 0.3 V
0V
Voltage Waveforms
Enable and Disable Times
6. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control
7. All input pulses are supplied by generators having the following characteristics: PRR v 10 MHz, ZO = 50 W, tr v 2.5 ns, tf v 2.5 ns.
8. The outputs are measured one at a time, with one transition per measurement.
9. tPLZ and tPHZ are the same as tDIS.
10. tPZL and tPZH are the same as tEN.
11. tPHL and tPLH are the same as tPD.
Figure 6. tPD, tEN, tDIS Loading and Waveforms
http://onsemi.com
6

6 Page



ページ 合計 : 12 ページ
 
PDF
ダウンロード
[ 7WBD3305 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
7WBD3305

2-Bit Translating Bus Switch

ON Semiconductor
ON Semiconductor
7WBD3306

2-Bit Translating Bus Switch

ON Semiconductor
ON Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap