|
|
Número de pieza | EEVTG | |
Descripción | Aluminum Electrolytic Capacitor | |
Fabricantes | Panasonic Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de EEVTG (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! Aluminum Electrolytic Cawpwwa.DcaitatSohere/t4TU.Gcom
Surface Mount Type
Series: TG
s Features
Type : V
Endurance:125°C 1000 to 2000 h
Miniaturization(40% less than TA Series)
Low ESR(Low temp)
Vibration-proof product is available upon request.(φ8 <=)
Japan
s Application Corresponds to use in the car engine room.
The best for an electronically controlled
unit (ECU, ABS etc).
s Specifications
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
Characteristics
at Low Temperature
Endurance
Shelf Life
-40 to +125°C
10 to 100 V .DC
10 to 4700 µ F
±20 % (120Hz/+20°C)
I <= 0.01 CV or 3(µ A) after 2 minutes (whichever, greater)
Please see the attached standard products list
W.V. (V) 10 16 25 35 50 63 80 100
-25 / +20 °C 3
2
22 2
2
2
2 (Inpedance ratio at 120Hz)
-40 / +20 °C 6 4 4 3 3
33
3
After applying rated working voltage for 1000 hours(φ8 x 6.2), 2000 hours(8x10.2 <=) at +125
±2°C and then being stabilized at +20°C, capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value (code U:±35%)
tan δ
DC leakage current
<= 300 % of initial specified value (code U:350%)
<= initial specified value
After storage for 1000 hours at +125 ±2°C with no voltage applied and then being stabilized
at +20°C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
Resistance to
Soldering Heat
After reflow soldering ( Refer to page 20 for recommendable temperature profile.) and then
being stabilized at +20°C, capacitor shall meet the following limits.
Capacitance change
tan δ
DC leakage current
±10 % of initial measured value
<= initial specified value
<= initial specified value
s Marking
(=<φ10)
W.V. code
Negative polarity
marking
TG
s Dimensions in mm (not to scale)
Capacitance
(µF)
Series
identification
0.3 max
A ± 0.2
( ) reference size
Lot number
(=>φ12.5)
W.V. code
Negative polarity
marking
Capacitance
(µF)
TG Series
identification
W.V. code
V
Code
V
Code
Lot number
10 16 25 35
AC EV
50 63 80 100
H J K 2A
E~G=L±0.3
H~K=L±0.5
w
Size
code
D
L A,B H max. I
W
P
K
E 8.0 6.2 8.3 9.5 3.4 0.65 ±0.1 2.2 0.35 -0.20 to +0.15
F 8.0 10.2 8.3 10.0 3.4 0.90 ±0.2 3.1 0.70 ±0.20
G 10.0 10.2 10.3 12.0 3.5 0.90 ±0.2 4.6 0.70 ±0.20
H13 12.5 13.5 13.5 15.0 4.7 0.90 ±0.3 4.4 0.70 ±0.30
J16 16.0 16.5 17.0 19.0 5.5 1.20 ±0.3 6.7 0.70 ±0.30
K16 18.0 16.5 19.0 21.0 6.7 1.20 ±0.3 6.7 0.70 ±0.30
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
EE74
1 page Aluminum Electrolytic Cawpwwa.DcaitatSohere/t4TU.Gcom
s Standard Products
Case Size
Specification
W.V.
(V)
Cap
(±20%)
(µF)
Dia. Length Size
code
(mm) (mm)
Ripple
current
(100kHz)
(+125°C)
(m A )
ESR
(100kHz)
(+20°C)
(Ω)
tan δ
(120Hz)
(+20°C)
10 8 10.2 F
70
1.3
0.1
22 (8) (10.2) (F) (70)
(1.3)
0.1
10 10.2 G
90
1.0
0.1
33 10 10.2 G
90
100
47 12.5 13.5 H13 250
1.0
0.42
0.1
0.1
100 16 16.5 J16 350 0.3 0.1
220 18 16.5 K16 400
0.28
0.1
330 18 16.5 K16 400
0.28
0.1
The taping dimension are explained on p.42 of our Catalog.
Please use it as a reference guide.
Endurance : 125°C 1000 to 2000h
Part No.
Min. Packaging
Q’ty
Taping
(pcs)
EEVTG2A100P
500
EEVTG2A220UP
EEVTG2A220P
500
500
EEVTG2A330P
500
EEVTG2A470Q
200
EEVTG2A101M
125
EEVTG2A221M
125
EEVTG2A331M
125
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
EE78
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet EEVTG.PDF ] |
Número de pieza | Descripción | Fabricantes |
EEVTG | Aluminum Electrolytic Capacitor | Panasonic Semiconductor |
EEVTG1A102Q | Aluminum Electrolytic Capacitors | Panasonic |
EEVTG1A152UQ | Aluminum Electrolytic Capacitors | Panasonic |
EEVTG1A222M | Aluminum Electrolytic Capacitors | Panasonic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |