DataSheet.es    


PDF IL2576-XX Data sheet ( Hoja de datos )

Número de pieza IL2576-XX
Descripción Step-Down Switching Regulator
Fabricantes IK Semicon 
Logotipo IK Semicon Logotipo



Hay una vista previa y un enlace de descarga de IL2576-XX (archivo pdf) en la parte inferior de esta página.


Total 10 Páginas

No Preview Available ! IL2576-XX Hoja de datos, Descripción, Manual

TECHNICAL DATA
3.0 A, 15 V, Step-Down
Switching Regulator
IL2576-xx
The IL2576 series of regulators are monolithic integrated
circuits ideally suited for easy and convenient design of a step–
down switching regulator (buck converter). All circuits of this series
are capable of driving a 3.0 A load with excellent line and load
regulation. These devices are available in fixed output voltages of
3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version.
TO-220-5L
These regulators were designed to minimize the number of
external components to simplify the power supply design. Standard
series of inductors optimized for use with the IL2576 are offered by
several different inductor manufacturers. Since the IL2576
converter is a switch–mode power supply, its efficiency is
www.DaslinitgaenSahifreicerate4ngUtul.yclaotmhoirgsh,eer spinecicaollmy pwairtihsohnighweitrh
popular three–terminal
input voltages. In many
TO-263-5L
cases, the power dissipated is so low that no heatsink is required
or its size could be reduced dramatically.
A standard series of inductors optimized for use with the
IL2576 are available from several different manufacturers. This
ORDERING INFORMATION
feature greatly simplifies the design of switch–mode power
supplies. The IL2576 features include a guaranteed ±4% tolerance
on output voltage within specified input voltages and output load
IL2576S
IL2576D2
TO-220-5L
TO-263-5L
conditions, and ±10% on the oscillator frequency (±2% over 0°C to
125°C). External shutdown is included, featuring 80 (typical)
TA = -40° to 125° C for all packages
standby current. The output switch includes cycle–by–cycle current
limiting, as well as thermal shutdown for full protection under fault conditions.
Features
3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
Adjustable Version Output Voltage Range, 1.23 to 37 V ±4%
Maximum Over Line and Load Conditions
Guaranteed 3.0 A Output Current
Wide Input Voltage Range
Requires Only 4 External Components
52 kHz Fixed Frequency Internal Oscillator
TTL Shutdown Capability, Low Power Standby Mode
High Efficiency
Uses Readily Available Standard Inductors
Thermal Shutdown and Current Limit Protection
Pin connections
1. Vin
2. Output
3. Ground
4. Feedback
5. ON/OFF
Applications
Simple High–Efficiency Step–Down (Buck) Regulator
Efficient Pre–Regulator for Linear Regulators
On–Card Switching Regulators
Positive to Negative Converter (Buck–Boost)
Negative Step–Up Converters
Power Supply for Battery Chargers
Rev. 02

1 page




IL2576-XX pdf
Fixed Output Voltage Versions
www.DataSheet4U.com
Cin – 100 mF, 75 V, Aluminium Electrolytic
Cout – 1000 mF, 25 V, Aluminium Electrolytic
D1 – Schottky, MBR360
L1 – 100 mH, Pulse Eng. PE–92108
R1 – 2.0 k, 0.1%
R2 – 6.12 k, 0.1%
Figure 3.
Adjustable Output Voltage Versions
IL2576-xx
Figure 4.
Vout
= Vref
⎜⎜⎝⎛1.0 +
R2
R1
⎟⎟⎠⎞
,
R2
=
R1
⎜⎜⎝⎛
Vout
Vref
1.0 ⎟⎟⎠⎞
Where Vref = 1.23 V, R1 between 1.0 k and 5.0 k
C1 = 10 nF
C2 = 1 nF
Rev. 02

5 Page










PáginasTotal 10 Páginas
PDF Descargar[ Datasheet IL2576-XX.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
IL2576-XXStep-Down Switching RegulatorIK Semicon
IK Semicon

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar