3-Terminal Fixed Positive Voltage Regulator
connected to Pin 2)
Voltage Range 5V to 24V
Output Current up to 1A
These voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of
applications including local, on-card regulation. These regulators employ internal current limiting, thermal shutdown, and
www.DataSheseafte4-Ua.rceoamcompensation. With adequate heatsink they can deliver output currents up to 1 ampere.
Although designed primarily as a fixed voltage regulator, these devices can be used with external components to obtain
adjustable voltages and currents.
This series is offered in 3-pin TO-220, ITO-220 package.
Output current up to 1A
No external components required
Internal thermal overload protection
Internal short-circuit current limiting
Output transistor safe-area compensation
Output voltage offered in 4% tolerance
Operating Temp. Package
-20 ~ +85oC
Note: Where xx denotes voltage option.
Absolute Maximum Rating
A common ground is required between the input and the
output voltages. The input voltage must remain typically 2.0V
above the output voltage even during the low point on the
Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
Operating Junction Temperature Range
Storage Temperature Range
Note : * TS7805 to TS7818
*** Follow the derating curve
0 ~ +150
-65 ~ +150
1-9 2003/12 rev. A