DataSheet.jp

LTC3209-2 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 LTC3209-2
部品説明 600mA Main/Camera LED Controller
メーカ Linear Technology
ロゴ Linear Technology ロゴ 

Total 20 pages
		

No Preview Available !

LTC3209-2 Datasheet, LTC3209-2 PDF,ピン配置, 機能
FEATURES
Multimode Charge Pump Provides Up to 94%
Efficiency (1x, 1.5x, 2x)
Up to 600mA Total Output Current
LTC3209-1: 8 Current Sources Available as
6 × 25mA MAIN, 1 × 400mA CAM and 1 × 15mA AUX
LTC3209-2: 8 Current Sources Available as
5 × 25mA MAIN, 2 × 200mA CAM and 1 × 15mA AUX
www.DLatEaDShOeent/4OUf.fcoamnd Brightness Level Programmable
Using 2-Wire I2CTM Interface
Automatic Charge Pump Mode Switching or Fixed
Mode for Power Supply Generation
Low Noise Constant Frequency Operation*
Internal Soft-Start Limits Inrush Current During
Start-up and Mode Switching
Short Circuit/Thermal/Open-Shorted LED Protection
256 Brightness States for MAIN Display
16 Brightness States for CAM Display
4 Brightness States for AUX Display
20-Lead (4mm × 4mm) QFN Package
U
APPLICATIO S
Video/Camera Phones with QVGA+ Displays
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
*Protected by U.S. Patents, including 6411531
LTC3209-1/LTC3209-2
600mA Main/Camera
LED Controller
DESCRIPTIO
The LTC®3209-1/LTC3209-2 are highly integrated
multidisplay LED controllers. These parts contain a high
efficiency, low noise charge pump to provide power to
MAIN, CAM and AUX LED displays. The LTC3209-1/
LTC3209-2 require only four small ceramic capacitors
and one current set resistor to form a complete LED power
supply and current controller.
The maximum display currents are set by a single external
resistor. Current for each LED is controlled by a precision
internal current source. Dimming and On/Off for all dis-
plays is achieved via the I2C serial interface. 256 states are
available for the MAIN display. Sixteen states are available
for the CAM display and four states are available for the
AUX display.
The charge pump optimizes efficiency based on the
voltage across the LED current sources. The part powers
up in 1x mode and will automatically switch to boost mode
whenever any enabled MAIN or CAM LED current source
begins to enter dropout. The first dropout switches the
part into 1.5x mode and a subsequent dropout switches
the part into 2x mode. The part resets to 1x mode
whenever a data bit is updated via the I2C port. The parts
are available in a 4mm × 4mm 20-lead QFN package.
TYPICAL APPLICATIO
LTC3209-1 6 MAIN/1 CAM Operation
LTC3209-2 5 MAIN/2 CAM Operation
2.2µF 2.2µF
2.2µF 2.2µF
VBAT
2.2µF
C1P C1M C2P C2M 2.2µF
VBAT1,2
CPO
I2C
LOW HI
LTC3209-1
SCL
SDA
CAMHL
RREF
6
MAIN1-6
CAM
AUX
GND
24.3k
MAIN
CAM
RED
3209 TA01
VBAT
2.2µF
C1P C1M C2P C2M 2.2µF
VBAT1,2
CPO
LTC3209-2
SCL
I2C
SDA
LOW HI
CAMHL
RREF
24.3k
5
MAIN1-5
2
CAM
AUX
GND
MAIN
CAM
RED
3209 TA02
320912fa
1

1 Page





ページ 合計 : 20 ページ
PDF
ダウンロード
[ LTC3209-2.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
LTC3209-1

There is a function of 600mA Main/Camera LED Controller.

Linear Technology
Linear Technology
LTC3209-2

There is a function of 600mA Main/Camera LED Controller.

Linear Technology
Linear Technology

多くを見つけるデータシート

部品番号部品説明メーカ
82S129

The 82S126 and 82S129 are field programmable, which means that custom patterns are immediately available by following the Signetics Generic fusing procedure. 1K-bit TTL Bipolar PROM, Address access time : 50ns max.

NXP
NXP
D1695

This part is a darlington connection NPN silicon epitaxial transistor. The 2SD1695 is a Darlington connection transistor and incorporates a dumper diode between the collector and emitter and a constant voltage diode and protection elements between the collector and base. This transistor is ideal for drives in solenoid and actuators.

NEC
NEC

www.DataSheet.jp    |   2018   |  メール    |   最新    |   Sitemap