DataSheet.jp

LP2985IBL-1.8 の電気的特性と機能

LP2985IBL-1.8のメーカーはNational Semiconductorです、この部品の機能は「Micropower 150 mA Low-Noise Low-Dropout Regulator in SOT-23 and micro SMD packages for Applications」です。


製品の詳細 ( Datasheet PDF )

部品番号 LP2985IBL-1.8
部品説明 Micropower 150 mA Low-Noise Low-Dropout Regulator in SOT-23 and micro SMD packages for Applications
メーカ National Semiconductor
ロゴ National Semiconductor ロゴ 




このページの下部にプレビューとLP2985IBL-1.8ダウンロード(pdfファイル)リンクがあります。

Total 17 pages

No Preview Available !

LP2985IBL-1.8 Datasheet, LP2985IBL-1.8 PDF,ピン配置, 機能
May 2004
LP2985LV
Micropower 150 mA Low-Noise Low-Dropout Regulator
in SOT-23 and micro SMD packages for Applications
with Output Voltages 2.3V
Designed for Use with Very Low ESR Output Capacitors
General Description
The LP2985LV is a 150 mA, fixed-output voltage regulator
designed to providehigh performance and low noise in ap-
plications requiring output voltages < 2.3V.
Using an optimized VIP(Vertically Integrated PNP) pro-
cess, the LP2985LV delivers unequalled performance in all
specifications critical to battery-powered designs:
Ground Pin Current: Typically 825 µA @ 150 mA load, and
75 µA @ 1 mA load.
Enhanced Stability: The LP2985LV is stable with output
capacitor ESR as low as 5 m, which allows the use of
ceramic capacitors on the output.
Sleep Mode: Less than 1 µA quiescent current when ON/
OFF pin is pulled low.
Smallest Possible Size: micro SMD package uses absolute
minimum board space.
Precision Output: 1% tolerance output voltages available
(A grade).
Low Noise: By adding a 10 nF bypass capacitor, output
noise can be reduced to 30 µV (typical).
Features
n Guaranteed 150 mA output current
n Smallest possible size (micro SMD)
n Requires minimum external components
n Stable with low-ESR output capacitor
n <1 µA quiescent current when shut down
n Low ground pin current at all loads
n Output voltage accuracy 1% (A Grade)
n High peak current capability
n Wide supply voltage range (16V max)
n Low ZOUT: 0.3typical (10 Hz to 1 MHz)
n Overtemperature/overcurrent protection
n −40˚C to +125˚C junction temperature range
n Custom voltages available
Applications
n Cellular Phone
n Palmtop/Laptop Computer
n Personal Digital Assistant (PDA)
n Camcorder, Personal Stereo, Camera
Block Diagram
VIPis a trademark of National Semiconductor Corporation.
© 2004 National Semiconductor Corporation DS101295
10129501
www.national.com

1 Page





LP2985IBL-1.8 pdf, ピン配列
Ordering Information
TABLE 1. Package Marking and Ordering Information
Output Voltage (V)
Grade
Order Information
5-Lead Small Outline Package (M5)
1.35
A LP2985AIM5X-135
1.35
A LP2985AIM5-135
1.35
STD
LP2985IM5X-135
1.35
STD
LP2985IM5-135
1.5 A LP2985AIM5X-1.5
1.5 A LP2985AIM5-1.5
1.5
STD
LP2985IM5X-1.5
1.5
STD
LP2985IM5-1.5
1.8 A LP2985AIM5X-1.8
1.8 A LP2985AIM5-1.8
1.8
STD
LP2985IM5X-1.8
1.8
STD
LP2985IM5-1.8
2.0 A LP2985AIM5X-2.0
2.0 A LP2985AIM5-2.0
2.0
STD
LP2985IM5X-2.0
2.0
STD
LP2985IM5-2.0
micro SMD, 5 Bump Package (BPA05 - 170 µm ball)
1.5 A LP2985AIBP-1.5
1.5 A LP2985AIBPX-1.5
1.5
STD
LP2985IBP-1.5
1.5
STD
LP2985IBPX-1.5
1.8 A LP2985AIBP-1.8
1.8 A LP2985AIBPX-1.8
1.8
STD
LP2985IBP-1.8
1.8
STD
LP2985IBPX-1.8
micro SMD, 5 Bump Package (BLA05 - 300 µm ball)
1.8 A LP2985AIBL-1.8
1.8 A LP2985AIBLX-1.8
1.8
STD
LP2985IBL-1.8
1.8
STD
LP2985IBLX-1.8
micro SMD, 5 Bump Package (TPA05 - 170 µm ball)
1.8 A LP2985AITP-1.8
1.8 A LP2985AITPX-1.8
1.8
STD
LP2985ITP-1.8
1.8
STD
LP2985ITPX-1.8
Package
Marking
LF7A
LF7A
LF7B
LF7B
LCHA
LCHA
LCHB
LCHB
LAYA
LAYA
LAYB
LAYB
LCDA
LCDA
LCDB
LCDB
Supplied as:
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
3000 Units on Tape and Reel
1000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
250 Units on Tape and Reel
3000 Units on Tape and Reel
3 www.national.com


3Pages


LP2985IBL-1.8 電子部品, 半導体
Typical Performance Characteristics Unless otherwise specified: CIN = 1µF, COUT = 4.7µF,
VIN = VOUT(NOM) +1, VOUT = 1.8V, TA = 25˚C, ON/OFF pin is tied to VIN
VOUT vs Temperature
Short-Circuit Current
Short-Circuit Current
10129507
10129516
Short-Circuit Current vs Output Voltage
10129517
Ripple Rejection
COUT = 4.7µF, Bypass = 10nF
10129518
Ripple Rejection
COUT = 4.7µF, No Bypass
www.national.com
10129525
6
10129526

6 Page



ページ 合計 : 17 ページ
 
PDF
ダウンロード
[ LP2985IBL-1.8 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
LP2985IBL-1.8

Micropower 150 mA Low-Noise Low-Dropout Regulator in SOT-23 and micro SMD packages for Applications

National Semiconductor
National Semiconductor
LP2985IBL-1.8

Micropower 150 mA Low-Noise Low-Dropout Regulator in SOT-23 and micro SMD packages for Applications

National Semiconductor
National Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap