No Preview Available !
www.DataSheet4U.com
Product Specification
Part Name: OEL Display Module
Part ID: UG-9664HSWAG01
Doc No.: SAS1-6020-B
Customer:
Approved by
From: Univision Technology Inc.
Approved by
Univision Technology Inc.
8, Kebei RD 2, Science Park, Chu-Nan, Taiwan 350, R.O.C.
Notes:
1. Please contact Univision Technology Inc. before assigning your product based on this
module specification
2. The information contained herein is presented merely to indicate the characteristics and
performance of our products. No responsibility is assumed by Univision Technology
Inc. for any intellectual property claims or other problems that may result from
application based on the module described herein.
1 page
Univision Technology Inc. Doc. wNwo:wS.DAaSt1a-S6he0e2t04-UB.com
8. Precautions When Using These OEL Display Modules....................... 21~23
8.1 Handling Precautions .................................................................................................21
8.2 Storage Precautions....................................................................................................22
8.3 Designing Precautions ...............................................................................................22
8.4 Precautions when disposing of the OEL display modules.........................................23
8.5 Other Precautions.......................................................................................................23
iv
5 Page
Univision Technology Inc.
2. Absolute Maximum Ratings
Doc. wNwo:wS.DAaSt1a-S6he0e2t04-UB.com
Parameter
Symbol Min Max Unit Notes
Supply Voltage for Logic
VDD -0.3 4
V 1, 2
Supply Voltage for I/O Pins
VDDIO
-0.3 VDD+0.5 V
1, 2
Supply Voltage for Display
VCC
0 15 V 1, 2
Operating Temperature
TOP -30 70 °C -
Storage Temperature
TSTG
-40 80
°C
-
Note 1: All the above voltages are on the basis of “VSS = 0V”.
Note 2: When this module is used beyond the above absolute maximum ratings,
permanent breakage of the module may occur. Also, for normal operations, it
is desirable to use this module under the conditions according to Section 3.
“Optics & Electrical Characteristics”. If this module is used beyond these
conditions, malfunctioning of the module can occur and the reliability of the
module may deteriorate.
6
11 Page
|