|
![]() |
LC78011EのメーカーはSanyo Semicon Deviceです、この部品の機能は「Digital RGB Encoder IC for Video CD and CD-G」です。 |
部品番号 | LC78011E |
| |
部品説明 | Digital RGB Encoder IC for Video CD and CD-G | ||
メーカ | Sanyo Semicon Device | ||
ロゴ | ![]() |
||
このページの下部にプレビューとLC78011Eダウンロード(pdfファイル)リンクがあります。 Total 13 pages
![]() Ordering number : EN5755
CMOS IC
LC78011E
Digital RGB Encoder IC for Video CD and CD-G
Overview
The LC78011E is a CMOS IC that integrates a digital
RGB encoder and a synchronizing signal generation
circuit on a single chip. A video CD or CD-G system can
be formed using the LC78011E together with an MPEG
video decoder or a CD-G decoder, respectively.
Features
• System structure
— Each system (Video CD or CD-G system) formed
with an additional chip: MPEG decoder or CD-G
decoder chip.
• Video outputs
— 8-bit D/A converter outputs: 2 channels
— The LC78011E supports the following two video
signal output formats:
Luminance signal (Y) and chroma signal (C) outputs
Composite video signal (C • VIDEO) output (Only
one D/A converter channel operates in this mode.)
• System clock
— External 4fsc clock
NTSC mode: 14.31818 MHz
PAL mode: 17.734475 MHz
PAL-M mode: 14.30244596 MHz
• External subcarrier input
— An external fsc clock is input and used for subcarrier
synchronization timing.
• Video data input
— The LC78011E supports the following four input
formats:
R, G, and B: 8 bits each
Y, U, and V: 8 bits each
Y and UV: 8 bits each (The UV input is a
multiplexed input)
R, G, and B: 4 bits each (In CD-G input support
mode)
• OSD input support
— R, G, and B + BLK 4-bit inputs (color support)
(BLK is an OSD display switching timing signal.)
• External synchronizing signal input
— Horizontal synchronizing signal, composite
synchronizing signal, and composite blanking signal
inputs: HSYNC, CSYNC, and BLANK.
• Video signal formats
— The LC78011E supports the NTSC, PAL, and PAL-
M formats.
Package Dimensions
unit: mm
3156-QIP48E
[LC78011E]
SANYO: QIP48E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
33198RM (OT) No. 5755-1/13
1 Page ![]() ![]() Pin Functions
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Symbol
RYIN3
RYIN2
RYIN1
RYIN0
DVSS
CLKI
FSCIN
DVDD
GUIN7
GUIN6
GUIN5
GUIN4
GUIN3
GUIN2
GUIN1
GUIN0
BVIN7
BVIN6
BVIN5
BVIN4
BVIN3
BVIN2
BVIN1
BVIN0
AVDD
CROUT
BIAS
YOUT
AVSS
CCSEL
NPSEL
32 PMSEL
33 CDGSEL
34 TEST
35 RESET
36 OSBIN
37 OSGIN
38 OSRIN
39 OSBLK
LC78011E
I/O
IN
IN
IN
IN
—
IN
IN
—
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
—
OUT
OUT
OUT
—
IN
IN
IN
Polarity
Function
Positive R/Y data input
A pull-down resistor is built in.
Positive R/Y data input
A pull-down resistor is built in.
Positive R/Y data input
A pull-down resistor is built in.
Positive R/Y data input (LSB)
A pull-down resistor is built in.
— Digital system ground
— 4fsc clock input
A feedback resistor is built in.
— fsc clock input
A feedback resistor is built in.
— Digital system power supply
Positive G/U data input (MSB)
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input
A pull-down resistor is built in.
Positive G/U data input (LSB)
A pull-down resistor is built in.
Positive B/V/UV data input (MSB)
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input
A pull-down resistor is built in.
Positive B/V/UV data input (LSB)
A pull-down resistor is built in.
— Analog system power supply (For the D/A converters.) (+5 V)
— Chroma signal/composite video signal output (8-bit D/A converter output)
— Ripple rejection capacitor connection (Use a 10 µF capacitor.)
— Luminance signal output (8-bit D/A converter output)
— Analog system ground (For the D/A converters.)
Positive D/A converter output control signal input (Low: YC signal output, High: Composite video signal output)
Positive Signal format selection input
Positive
NPSEL
0
1
0
1
PMSEL
0
0
1
1
D/A converter output signal mode
NTSC
PAL
PAL-M
– (Illegal setting)
Video CD/CD-G selection input (Low: CD-G, High: Video-CD)
IN Negative
(The input digital data can be selected to be either 4-bit or 8-bit data.)
IN Positive Test mode selection input (This pin must be tied low during normal operation.)
IN Negative Reset signal input
IN Positive OSD signal (B) input
IN Positive OSD signal (G) input
IN Positive OSD signal (R) input
IN Positive OSD switching signal input (The OSD blanking signal input)
Continued on next page.
No. 5755-3/13
3Pages ![]() ![]() Timing Charts
Data Input
LC78011E
Synchronizing Signal Input
Subcarrier Input
OSD Input
No. 5755-6/13
6 Page | |||
ページ | 合計 : 13 ページ | ||
|
PDF ダウンロード | [ LC78011E データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
LC78011E | Digital RGB Encoder IC for Video CD and CD-G | ![]() Sanyo Semicon Device |