|
|
Número de pieza | UCLAMP3311P | |
Descripción | Low Voltage Clamp | |
Fabricantes | Semtech Corporation | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de UCLAMP3311P (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! PROTECTION PRODUCTS - MicroClampTM
Description
The μClampTM series of Transient Voltage Suppressors
(TVS) are designed to replace multilayer varistors
(MLVs) in portable applications where low operating
voltage is vital. They offer superior electrical characteris-
tics such as lower clamping voltage and no device
degradation when compared to MLVs. They are de-
signed to protect sensitive semiconductor components
from damage or upset due to electrostatic discharge
(ESD), lightning, electrical fast transients (EFT), and
cable discharge events (CDE).
The μClampTM3311P is constructed using Semtech’s
proprietary EPD process technology. The EPD process
provides low standoff voltages with significant reduc-
tions in leakage currents and capacitance over silicon-
avalanche diode processes. They feature a true
operating voltage of 3.3 volts for superior protection
when compared to traditional pn junction devices.
The μClampTM3311P is in an 2-pin, RoHS/WEEE compli-
ant, SLP1006P2 package. It measures 1.0 x 0.6 x
0.5mm. The leads are spaced at a pitch of 0.65mm
and are finished with lead-free NiPdAu. Each device
will protect one line operating at 3.3 volts. It gives the
designer the flexibility to protect single lines in applica-
tions where arrays are not practical. They may be used
to meet the ESD immunity requirements of IEC 61000-
4-2, Level 4 (±15kV air, ±8kV contact discharge). The
combination of small size and high ESD surge capability
makes them ideal for use in portable applications such
as cellular phones, digital cameras, and MP3 players.
uClamp3311P
Low Voltage μClampTM
for ESD and CwwDw.EDatPaSrheoett4eU.ccotmion
Features
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC 61000-4-4 (EFT) 40A (tp = 5/50ns)
Cable Discharge Event (CDE)
Ultra-small package (1.0 x 0.6 x 0.5mm)
Protects one data line
Low clamping voltage
Working voltage: 3.3V
Low leakage current
Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1006P2 package
RoHS/WEEE Compliant
Nominal Dimensions: 1.0 x 0.6 x 0.5 mm
Lead Finish: NiPdAu
Molding compound flammability rating: UL 94V-0
Marking : Marking code, cathode band
Packaging : Tape and Reel
Applications
Cellular Handsets & Accessories
Notebooks & Handhelds
Portable Instrumentation
Digital Cameras
Peripherals
MP3 Players
Dimensions
Schematic & PIN Configuration
1.0
0.60
0.65
0.50
Maximum Dimensions (mm)
Revision 08/22/2007
1
SLP1006P2 (Bottom View)
www.semtech.com
1 page PROTECTION PRODUCTS
Applications Information - Spice Model
uClamp3311P
www.DataSheet4U.com
© 2007 Semtech Corp.
Figure 1 - uClamp3311P Spice Model
Table 1 - uClamp3311P Spice Parameters
Parameter
Unit
D1 (TVS)
D2 (TVS)
IS Amp 1E-20 1E-20
BV
Volt 3.8
3.8
VJ
Volt 0.7
0.7
RS
Ohm
1.1
1.1
IBV
Amp 1E-3
1E-3
CJO
Farad
20E-12
20E-12
TT
sec
2.541E-9
2.541E-9
M
--
0.214
0.214
N -- 1.1 1.1
EG eV 1.11 1.11
5
www.semtech.com
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet UCLAMP3311P.PDF ] |
Número de pieza | Descripción | Fabricantes |
UCLAMP3311P | Low Voltage Clamp | Semtech Corporation |
uClamp3311T | 1-Line ESD protection | Semtech Corporation |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |