|
![]() |
LC75864EのメーカーはSanyo Semicon Deviceです、この部品の機能は「1/4 Duty LCD Display Drivers with Key Input Function」です。 |
部品番号 | LC75864E |
| |
部品説明 | 1/4 Duty LCD Display Drivers with Key Input Function | ||
メーカ | Sanyo Semicon Device | ||
ロゴ | ![]() |
||
このページの下部にプレビューとLC75864Eダウンロード(pdfファイル)リンクがあります。 Total 26 pages
![]() Ordering number : ENN6860
CMOS IC
LC75864E, 75864W
1/4 Duty LCD Display Drivers with Key Input Function
Overview
The LC75864E and LC75864W are 1/4 duty LCD display
drivers that can directly drive up to 96 segments and can
control up to four general-purpose output ports. These
products also incorporate a key scan circuit that accepts
input from up to 30 keys to reduce printed circuit board
wiring.
Features
• Key input function for up to 30 keys (A key scan is
performed only when a key is pressed.)
• 1/4 duty - 1/2 bias and 1/4 duty - 1/3 bias drive schemes
can be controlled from serial data (up to 96 segments).
• Sleep mode and all segments off functions that are
controlled from serial data
• Segment output port/general-purpose output port
function switching that is controlled from serial data
• Serial data I/O supports CCB format communication
with the system controller.
• Direct display of display data without the use of a
decoder provides high generality.
• Independent VLCD for the LCD driver block
(VLCD can be set to in the range VDD - 0.5 to 6.0 volts.)
• Provision of an on-chip voltage-detection type reset
circuit prevents incorrect displays.
• RC oscillator circuit
Package Dimensions
unit: mm
3156-QIP48E
[LC75864E]
17.2
14.0
1.5 1.0 0.35
36
37
1.6
1.5
25
24
0.15
48
1
13
12
0.1
2.7
0.8
unit: mm
3163A-SQFP48
15.6
SANYO: QIP48E
[LC75864W]
0.75
36
37
9.0
7.0
0.5 0.18
0.75 0.15
25
24
48
1
13
12
• CCB is a trademark of SANYO ELECTRIC CO., LTD.
• CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
0.5 0.5
SANYO: SQFP48
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D2501TN (OT) No. 6860-1/26
1 Page ![]() ![]() LC75864E, 75864W
Allowable Operating Ranges at Ta = –40 to +85°C, VSS = 0 V
Parameter
Symbol
Conditions
Ratings
min typ max
Supply voltage
Input voltage
Input high level voltage
Input low level voltage
Recommended external
resistance
VDD
VLCD
VLCD1
VLCD2
VIH1
VIH2
VIL
ROSC
VDD
VLCD
VLCD1
VLCD2
CE, CL, DI
KI1 to KI5
CE, CL, DI, KI1 to KI5
OSC
4.5
VDD – 0.5
0.8 VDD
0.6 VDD
0
2/3 VLCD
1/3 VLCD
43
6.0
6.0
VLCD
VLCD
6.0
VLCD
0.2 VDD
Recommended external
capacitance
COSC OSC
680
Guaranteed oscillation range
Data setup time
Data hold time
CE wait time
CE setup time
CE hold time
High level clock pulse width
Low level clock pulse width
Rise time
Fall time
DO output delay time
DO rise time
fOSC
tds
tdh
tcp
tcs
tch
tøH
tøL
tr
tf
tdc
tdr
OSC
CL, DI: Figure 2
CL, DI: Figure 2
CE, CL: Figure 2
CE, CL: Figure 2
CE, CL: Figure 2
CL: Figure 2
CL: Figure 2
CE, CL, DI: Figure 2
CE, CL, DI: Figure 2
DO, RPU = 4.7 kΩ, CL = 10 pF*1: Figure 2
DO, RPU = 4.7 kΩ, CL = 10 pF*1: Figure 2
25 50 100
160
160
160
160
160
160
160
160
160
1.5
1.5
Note: *1. Since DO is an open-drain output, these times depend on the values of the pull-up resistor RPU and the load capacitance CL.
Unit
V
V
V
V
kΩ
pF
kHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
µs
µs
No. 6860-3/26
3Pages ![]() ![]() Block Diagram
LC75864E, 75864W
VLCD
VLCD1
VLCD2
VSS
TEST
OSC
DO
DI
CL
CE
VDD
COMMON
DRIVER
CLOCK
GENERATOR
CCB
INTERFACE
VDET
SEGMENT DRIVER & LATCH
SHIFT REGISTER
CONTROL
REGISTER
KEY BUFFER
KEY SCAN
No. 6860-6/26
6 Page | |||
ページ | 合計 : 26 ページ | ||
|
PDF ダウンロード | [ LC75864E データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
LC75864E | 1/4 Duty LCD Display Drivers with Key Input Function | ![]() Sanyo Semicon Device |
LC75864W | 1/4 Duty LCD Display Drivers with Key Input Function | ![]() Sanyo Semicon Device |