IS64C6416AL Datasheet PDF - Integrated Silicon Solution
| Part Number | IS64C6416AL | |
| Description | 64K x 16 HIGH-SPEED CMOS STATIC RAM | |
| Manufacturers | Integrated Silicon Solution | |
| Logo |  |
|
|
There is a preview and IS64C6416AL download ( pdf file ) link at the bottom of this page. Total 17 Pages | ||
Preview 1 page No Preview Available !
IS61C6416AL IS64C6416AL
IS62C6416AL IS65C6416AL
ISSI®
www.DataSheet4U.com
64K x 16 HIGH-SPEED CMOS STATIC RAM
JANUARY 2005
FEATURES
IS61C6416AL and IS64C6416AL
• High-speed access time: 12 ns, 15ns
• Low Active Power: 175 mW (typical)
• Low Standby Power: 1 mW (typical)
CMOS standby
IS62C6416AL and IS65C6416AL
• High-speed access time: 35 ns, 45ns
• Low Active Power: 50 mW (typical)
• Low Standby Power: 100 µW (typical)
CMOS standby
• TTL compatible interface levels
• Single 5V ± 10% power supply
• Fully static operation: no clock or refresh
required
• Available in 44-pin SOJ package and
44-pin TSOP (Type II)
• Commercial, Industrial and Automotive tempera-
ture ranges available
• Lead-free available
DESCRIPTION
The ISSI IS61C6416AL, IS62C6416AL, IS64C6416AL and
IS65C6416AL are high-speed, 1,048,576-bit static RAMs
organized as 65,536 words by 16 bits. They are fabricated
using ISSI's high-performance CMOS technology. This highly
reliable process coupled with innovative circuit design tech-
niques, yields access times as fast as 12 ns with low power
consumption.
When CE is HIGH (deselected), the device assumes a
standby mode at which the power dissipation can be reduced
down with CMOS input levels.
Easy memory expansion is provided by using Chip Enable
and Output Enable inputs, CE and OE. The active LOW Write
Enable (WE) controls both writing and reading of the memory.
A data byte allows Upper Byte (UB) and Lower Byte (LB)
access.
The IS61C6416AL, IS62C6416AL, IS64C6416AL and
IS65C6416AL are packaged in the JEDEC standard 44-pin
400-mil SOJ and 44-pin TSOP (Type II).
FUNCTIONAL BLOCK DIAGRAM
A0-A15
DECODER
64K x 16
MEMORY ARRAY
VDD
GND
I/O0-I/O7
Lower Byte
I/O8-I/O15
Upper Byte
I/O
DATA
CIRCUIT
COLUMN I/O
CE
OE
WE
CONTROL
CIRCUIT
UB
LB
Copyright © 2005 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability
arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on any
published information and before placing orders for products.
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
Rev. A
01/17/05
1
|
| |
 
IS61C6416AL IS64C6416AL
IS62C6416AL IS65C6416AL
ISSI ®
www.DataSheet4U.com
IS61C6416AL/IS64C6416AL
POWER SUPPLY CHARACTERISTICS(1) (Over Operating Range)
Symbol Parameter
ICC1 VDD Operating
Supply Current
ICC2 VDD Dynamic Operating
Supply Current
Test Conditions
VDD = VDD MAX., CE = VIL
IOUT = 0 mA, f = 0
VDD = VDD MAX., CE = VIL
IOUT = 0 mA, f = fMAX
ISB1 TTL Standby Current
(TTL Inputs)
VDD = VDD MAX.,
VIN = VIH or VIL
CE ≥ VIH, f = 0
Com.
Ind.
Auto.
Com.
Ind.
Auto.
typ.(2)
Com.
Ind.
Auto.
-12 ns
Min. Max.
— 40
— 45
— 50
— 55
— 35
—1
—1
-15 ns
Min. Max.
— 50
— 60
—1
Unit
mA
mA
mA
ISB2 CMOS Standby
VDD = VDD MAX.,
Current (CMOS Inputs) CE ≤ VDD – 0.2V,
VIN ≥ VDD – 0.2V, or
VIN ≤ 0.2V, f = 0
Com.
Ind.
Auto.
typ.(2)
— 350
— 400
— 200
— 450
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
2. Typical values are measured at VDD = 5V, TA = 25% and not 100% tested.
µA
IS62C6416AL/IS65C6416AL
POWER SUPPLY CHARACTERISTICS(1) (Over Operating Range)
Symbol Parameter
Test Conditions
-35 ns
Min. Max.
-45 ns
Min. Max.
ICC Averageoperating
Current
CE = VIL,
VIN = VIH or VIL,
I I/O= 0 mA
ICC1 VDDDynamicOperating VDD=Max., CE =VIL
SupplyCurrent
IOUT = 0 mA, f = fMAX
VIN = VIH or VIL
Com.
Ind.
Auto.
Com.
Ind.
Auto.
— 10
— 15
— 35
— 40
— 20
— 45
ISB1 TTLStandbyCurrent VDD=Max.,
(TTL Inputs)
VIN =VIH or VIL,CE ≥ VIH,
f=0
Com.
Ind.
Auto.
—1
— 1.5
—2
ISB2 CMOSStandby
VDD = Max.,
Current(CMOSInputs) CE≥ VDD–0.2V,
VIN ≥ VDD – 0.2V,
or VIN ≤ VSS + 0.2V, f = 0
Com.
Ind.
Auto.
—5
— 10
— 15
Note:
1. At f = fMAX, address and data inputs are cycling at the maximum frequency, f = 0 means no input lines change.
Unit
mA
mA
mA
µA
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
Rev. A
01/17/05
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for IS64C6416AL electronic component. |
| Information | Total 17 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ IS64C6416AL.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| IS64C6416AL | The function is 64K x 16 HIGH-SPEED CMOS STATIC RAM. Integrated Silicon Solution | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
IS64
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||