DataSheet.jp

LC72708E の電気的特性と機能

LC72708EのメーカーはSanyo Semicon Deviceです、この部品の機能は「FM Multiplex Broadcast Reception IC for Mobile VICS Systems」です。


製品の詳細 ( Datasheet PDF )

部品番号 LC72708E
部品説明 FM Multiplex Broadcast Reception IC for Mobile VICS Systems
メーカ Sanyo Semicon Device
ロゴ Sanyo Semicon Device ロゴ 




このページの下部にプレビューとLC72708Eダウンロード(pdfファイル)リンクがあります。
Total 15 pages

No Preview Available !

LC72708E Datasheet, LC72708E PDF,ピン配置, 機能
Ordering number : EN5875
CMOS IC
LC72708E
FM Multiplex Broadcast Reception IC
for Mobile VICS Systems
Overview
The LC72708E is a data demodulation IC for receiving
FM multiplex broadcasts for mobile receivers in the
DARC format. The LC72708E also includes a built-in
decoder circuit that performs VICS data processing. This
allows this IC to implement compact high-functionality
VICS reception systems. Note that a contract with VICS
Center is required to evaluate samples of this IC or to
mass produce products that support the VICS system.
Functions
• SCF-based adjustment-free 76-kHz bandpass filter
• VICS decoder circuit
• MSK delay detection circuit based on a 1T delay
• Error correction function based on a 2T delay (in the
MSK detector stage)
• Digital PLL based clock regeneration circuit
• Shift-register type 1T and 2T delay circuits
• Block and frame synchronization detection circuit
• Function for setting the number of allowable BIC errors,
the number of synchronization protection.
• Error correction using (272, 190) codes
• Layer 4 CRC code checking circuit
• On-chip frame memory and memory control circuit for
vertical correction
• 7.2-MHz crystal oscillator circuit
• Two power saving functions (Standby and EC stop)
Package Dimensions
unit: mm
3148-QIP44MA
[LC72708E]
SANYO: QIP44MA
• CCB is a trademark of SANYO ELECTRIC CO., LTD.
• CCB is SANYO’s original bus format and all the bus
addresses are controlled by SANYO.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
71598RM (OT) No. 5875-1/15

1 Page





LC72708E pdf, ピン配列
Continued from preceding page.
Parameter
Output off leakage current
Hysteresis voltage
Internal feedback resistor
Current drain
Block Diagram
LC72708E
Symbol
Conditions
IOFF
VHIS
Rf
IDD
VO = VDDD, DO
CL, CE, DI, RST, STNBY
XIN, XOUT
Ratings
Unit
min typ max
5 µA
0.1 VDD
1.0
V
M
18 25 mA
Antialiasing
filter
1T delay
2T delay
Clock
regeneration
MSK
correction
Synchronization
regeneration
PN
decoding
Timing
control
Error
correction
Layer 2
CRC
Data
Layer 4 CRC
VICS processing
circuit
Output control
(CPU interface)
Address
Memory array
Pin Assignment
No. 5875-3/15


3Pages


LC72708E 電子部品, 半導体
• Layer 4 CRC Data Input Timing
LC72708E
CRC4 pin output
Note: The N items are 8-bit units.
CRC4 output after N items transferred
Serial Control Data Input Settings
The input data consists of 16 bits (DI0 to DI15). The upper 8 bits (DI8 to DI15) are the control address and the lower 8
bits (DI0 to DI7) are the input data. Bits DI12 to DI15 are ignored.
Register
Number of allowable BIC errors
Number of block error protection states
Number of frame error protection states
Control register
Address
DI11 DI10 DI9 DI8
Data
Upper 4 bits Allowed error bits backward
0000
Lower 4 bits Allowed error bits forward
Upper 4 bits Block backward protection
0001
Lower 4 bits Block forward protection
Upper 4 bits Frame backward protection
0010
Lower 4 bits Frame forward protection
0 0 1 1 See the control register description on page 8.
Default
setting
2
2
1
7
1
7
• Number of Allowed BIC Errors
This IC’s synchronization circuit operates by recognizing a 16-bit BIC code. The number of allowed errors is the
number of allowed error bits in the 16 bits used for BIC recognition. This data item allows the forward protection mode
(used when synchronized) and the backward protection mode (used when not synchronized) values to be set
independently. The default value is to allow up to 2 error bits in both the forward and backward directions. We
recommend setting the backward protection mode number of allowable BIC errors to 1 or 0 if the block
synchronization recognition output (the BLOCK pin, pin 23) is used to recognize the presence or absence of FM
multiplex data.
• Block Synchronization Error Protection Count
The synchronization protection count can be set independently in the forward and backward directions. The protection
count conditions are as follows.
— Backward protection (unsynchronized, BLOCK = low)
When the timing of the IC’s internal synchronization free-running counter matches that of the received BIC, the
protection count is incremented by 1. Similarly, if the IC internal counter and the received BIC do not match, the
counter is cleared to 0. The count timing is the timing of the IC internal counter.
— Forward protection (synchronized, BLOCK = high)
Operation is the opposite of the backward case, namely, the protection count is incremented when the timing of the
IC’s internal synchronization free-running counter does not match that of the received BIC, and the protection
count is cleared to zero when the timing matches.
Figure 1 shows the protection counter when both the forward and backward protection counts are set to 3.
This IC defines the protection counter value to be 1 at the point where a match or a mismatch occurs between the IC
internal timing and the received BIC timing. For example, a backward protection count of 2 corresponds to the case
where the IC internal timing and the received BIC timing match two times consecutively. To set the protection data to
new values, applications must send data in which 1 has been subtracted from the desired values, e.g. to set up protection
counts of 3 as shown in figure 1, applications must send the value 22H. Similarly, if the value set is 00, due to the
definition, the protection counts for both the forward and backward directions will be set to 1. However, from an
operation standpoint, this corresponds to operation equivalent to there being no protection circuit. The default values are
a forward protection count of 8 and a backward protection count of 2. We recommend resetting the block synchronization
Continued on next page.
No. 5875-6/15

6 Page



ページ 合計 : 15 ページ
 
PDF
ダウンロード
[ LC72708E データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
LC72708

FM Multiplex Broadcast Reception IC for Mobile VICS Systems

Sanyo Semicon Device
Sanyo Semicon Device
LC72708E

FM Multiplex Broadcast Reception IC for Mobile VICS Systems

Sanyo Semicon Device
Sanyo Semicon Device


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap