DataSheet.jp

8050SD の電気的特性と機能

8050SDのメーカーはSanken electricです、この部品の機能は「SI-08050SD」です。


製品の詳細 ( Datasheet PDF )

部品番号 8050SD
部品説明 SI-08050SD
メーカ Sanken electric
ロゴ Sanken electric ロゴ 




このページの下部にプレビューと8050SDダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

8050SD Datasheet, 8050SD PDF,ピン配置, 機能
1-1-2 Switching Mode Regulator ICs
SI-8000SD Series Surface Mount, Separate Excitation Step-down Switching Mode Regulator ICs
Features
Lineup
• Surface-mount package (TO263-5)
• Output current: 3.0A
• High efficiency: 79% typ. (SI-8033SD), 84%
typ. (SI-8050SD)
• Requires only 4 discrete external components
• Internally-adjusted phase correction and
output voltage
• Built-in reference oscillator (60kHz)
• Built-in overcurrent and thermal protection
circuits
• Output ON/OFF available
• Soft start available by S.S pin
Applications
Part Number
VO (V)
IO (A)
SI-8033SD
3.3
Absolute Maximum Ratings
Parameter
DC Input Voltage
Symbol
VIN
Ratings
43*1
Power Dissipation*2
PD 3
Junction Temperature
Tj +125
Storage Temperature
Tstg –40 to +125
Thermal Resistance (Junction to Case)
θ j-c
3
Thermal Resistance
(Junction to Ambient Air)
θj-a 33.3
*1: 35V for SI-8033SD
*2: Limited by thermal protection circuit.
• Power supplies for telecommunication equipment
• Onboard local power supplies
Unit
V
W
°C
°C
°C/W
°C/W
SI-8050SD
5.0
3
Conditions
When mounted on glass-epoxy board 40 × 40 mm
(copper area: 100%)
When mounted on glass-epoxy board 40 × 40 mm
(copper area: 100%)
Recommended Operating Conditions
Parameter
DC Input Voltage Range
Output Current Range*
Operating Junction Temperature Range
Operating Temperature Range*
*: Limited by Ta-PD characteristics.
Symbol
VIN1
IO
Tjop
Top
SI-8033SD
5.5 to 28
Ratings
0 to 3.0
–30 to +125
–30 to +125
SI-8050SD
7 to 40
Unit
V
A
°C
°C
Electrical Characteristics
Parameter
Symbol
Output Voltage
Efficiency
wOwscwilla.DtioantFarSeqhueenecty4U.com
Line Regulation
Load Regulation
Temperature Coefficient of Output Voltage
Overcurrent Protection
Starting Current
Soft
Start Pin*
Low-Level Voltage
Outflow Current at
Low Voltage
VO
Conditions
η
Conditions
f
Conditions
VOLINE
Conditions
VOLOAD
Conditions
VO/Ta
IS1
Conditions
VSSL
ISSL
Conditions
min.
3.17
3.1
20
SI-8033SD
typ.
3.3
VIN=15V, IO=1A
79
VIN=15V, IO=1A
60
VIN=15V, IO=1A
25
VIN=8 to 28V, IO=1A
10
VIN=15V, IO=0.5 to 1.5A
±0.5
VIN=15V
0.2
30
Ratings
max.
3.43
min.
4.8
80
30
3.1
40 20
VSSL=0.2V
SI-8050SD
typ.
5.0
VIN=20V, IO=1A
84
VIN=20V, IO=1A
60
VIN=20V, IO=1A
40
VIN=10 to 30V, IO=1A
10
VIN=20V, IO=0.5 to 1.5A
±0.5
VIN=20V
0.2
30
* Pin 5 is a soft start pin. Soft start at power on can be performed with a capacitor connected to
this pin.
The output can also be turned ON/OFF with this pin.
The output is stopped by setting the voltage of this pin to VSSL or lower.
Soft-start pin voltage can be changed with an open-collector drive circuit of a transistor.
When using both the soft-start and ON/OFF functions together, the discharge current from C3
flows into the ON/OFF control transistor. Therefore, limit the current securely to protect the
transistor if C3 capacitance is large.
The ON/OFF pin is pulled up to the power supply in the IC, so applying the external voltage is
prohibited.
If this pin is not used, leave it open.
SI-8000SD
5 ON/OFF
VOUT. ON/OFF
SI-8000SD
5 ON/OFF
C3
Soft start
max.
5.2
100
40
40
(Ta=25°C)
Unit
V
%
kHZ
mV
mV
mV/ °C
A
V
µA
SI-8000SD
5 ON/OFF
C3
Soft start
+VOUT. ON/OFF
50 ICs

1 Page





8050SD pdf, ピン配列
qSI-8000SD Series
sSI-8033SD
Power dissipation vs. Output current (typical value)
3.5
VIN 5.5V
8V
3
2.5
2 15V
20V
1.5 28V
1
0.5
0
0 0.5 1 1.5 2 2.5 3 3.5
Output current IO (A)
Output current vs. Input voltage (typical value)
4.0
3.5 With glass epoxy board
measuring 40 × 40 mm
3.0
2.5
2.0
Operable range
1.5
1.0
0.5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Input voltage VIN [V]
sSI-8050SD
Power dissipation vs. Output current (typical value)
3.5
VIN 7V
10V
3
2.5
20V
2
30V, 40V
1.5
1
0.5
0
0 0.5 1 1.5 2 2.5 3 3.5
Output current IO (A)
Output current vs. Input voltage (typical value)
4.0
3.5 With glass epoxy board
measuring 40 × 40 mm
3.0
2.5
2.0
Operable range
1.5
1.0
0.5
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Input voltage VIN [V]
www.sDaPtaDS-hTeaet4CUh.caormacteristics
3.5
Copper laminate aera:
40×40 mm
(θj-a : 33.3°C/W)
3 20×40 mm
(θj-a : 37°C/W)
2.5 20×20 mm
(θj-a : 44°C/W)
10×10 mm
2 (θj-a : 53°C/W)
1.5
1
0.5
0
25 0 25 50 75 100 125
Ambient temperature Ta (°C)
When mounted on glass epoxy board
measuring 40 × 40 mm
100 VO
PD=VO IO
1 VF IO 1
ηχ VIN
Find the efficiency from the efficiency curve and substi-
tute in the percentage, because the efficiency varies de-
pending on the input voltage and output current.
VO : Output voltage
VIN: Input voltage
IO : Output current
ηχ : Efficiency
VF : Forward voltage of D1
0.4V (IO=2A) ··· SPB-G56S (Sanken)
Thermal design for D1 must be performed separately.
Applications
Varying output voltage
The output voltage can be varied in the same manner as SI-8000S. Refer of the catalog.


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ 8050SD データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
8050S

TRANSISTOR

Jiangsu Changjiang Electronics
Jiangsu Changjiang Electronics
8050S

NPN TRANSISTOR

Stanson Technology
Stanson Technology
8050S

NPN SILICON TRANSISTOR

Unisonic Technologies
Unisonic Technologies
8050SD

SI-08050SD

Sanken electric
Sanken electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap