DataSheet.jp

HD64F2368 の電気的特性と機能

HD64F2368のメーカーはRenesas Technologyです、この部品の機能は「16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie」です。


製品の詳細 ( Datasheet PDF )

部品番号 HD64F2368
部品説明 16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie
メーカ Renesas Technology
ロゴ Renesas Technology ロゴ 




このページの下部にプレビューとHD64F2368ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

HD64F2368 Datasheet, HD64F2368 PDF,ピン配置, 機能
REJ09B0050-0500
The revision list can be viewed directly by
clicking the title page.
The revision list summarizes the locations of
revisions and additions. Details should always
be checked by referring to the relevant text.
16
H8S/2368 Group
Hardware Manual
Renesas 16-Bit Single-Chip Microcomputer
H8S Family/H8S/2300 Series
www.DataSheet4U.com
H8S/2368F
H8S/2367F
H8S/2365
H8S/2364F
H8S/2363
H8S/2362F
H8S/2361F
H8S/2360F
HD64F2368
HD64F2367
HD6432365
HD64F2364
HD6412363
HD64F2362
HD64F2361
HD64F2360
Rev. 5.00
Revision Date: Aug 02, 2006

1 Page





HD64F2368 pdf, ピン配列
General Precautions on Handling of Product
1. Treatment of NC Pins
Note: Do not connect anything to the NC pins.
The NC (not connected) pins are either not connected to any of the internal circuitry or are
used as test pins or to reduce noise. If something is connected to the NC pins, the
operation of the LSI is not guaranteed.
2. Treatment of Unused Input Pins
Note: Fix all unused input pins to high or low level.
Generally, the input pins of CMOS products are high-impedance input pins. If unused pins
are in their open states, intermediate levels are induced by noise in the vicinity, a pass-
through current flows internally, and a malfunction may occur.
3. Processing before Initialization
Note: When power is first supplied, the product’s state is undefined.
The states of internal circuits are undefined until full power is supplied throughout the
chip and a low level is input on the reset pin. During the period where the states are
undefined, the register settings and the output state of each pin are also undefined. Design
your system so that it does not malfunction because of processing while it is in this
undefined state. For those products which have a reset function, reset the LSI immediately
after the power supply has been turned on.
4. Prohibition of Access to Undefined or Reserved Addresses
Note: Access to undefined or reserved addresses is prohibited.
The undefined or reserved addresses may be used to expand functions, or test registers
www.DatamShaeyeht4aUv.ecobmeen be allocated to these addresses. Do not access these registers; the system’s
operation is not guaranteed if they are accessed.
Rev. 5.00 Aug 02, 2006 page iii of liv


3Pages


HD64F2368 電子部品, 半導体
In order to understand the details of the CPU's functions
Read the H8S/2600 Series, H8S/2000 Series Software Manual.
For the execution state of each instruction in this LSI, see appendix D, Bus State during
Execution of Instructions.
In order to understand the details of a register when its name is known
Read the index that is the final part of the manual to find the page number of the entry on the
register. The addresses, bits, and initial values of the registers are summarized in section 24,
List of Registers.
Examples: Register name:
The following notation is used for cases when the same or a
similar function, e.g. 16-bit timer pulse unit or serial
communication, is implemented on more than one channel:
XXX_N (XXX is the register name and N is the channel
number)
Bit order:
The MSB is on the left and the LSB is on the right.
Number notation: Binary is B'xxxx, hexadecimal is H'xxxx, decimal is xxxx
Signal notation: An overbar is added to a low-active signal: xxxx
Related Manuals:
The latest versions of all related manuals are available from our web site.
Please ensure you have the latest versions of all documents you require.
http://www.renesas.com/
H8S/2368 Group manuals:
Document Title
H8S/2368 Group Hardware Manual
H8S/2600 Series, H8S/2000 Series Software Manual
www.DataSheet4U.com
User's manuals for development tools:
Document No.
This manual
REJ09B0139
Document Title
H8S, H8/300 Series C/C++ Compiler, Assembler, Optimizing Linkage
Editor User's Manual
H8S, H8/300 Series Simulator/Debugger User's Manual
H8S, H8/300 Series High-performance Embedded Workshop, Tutorial
High-performance Embedded Workshop User's Manual
Document No.
REJ10B0058
REJ10B0211
ADE-702-231
REJ10J0886
Rev. 5.00 Aug 02, 2006 page vi of liv

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ HD64F2368 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HD64F2360

16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie

Renesas Technology
Renesas Technology
HD64F2361

16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie

Renesas Technology
Renesas Technology
HD64F2362

16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie

Renesas Technology
Renesas Technology
HD64F2364

16-Bit Single-Chip Microcomputer H8S Family/H8S/2300 Serie

Renesas Technology
Renesas Technology


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap