|
|
PDF E3S-C Data sheet ( Hoja de datos )
| Número de pieza | E3S-C | |
| Descripción | long-distance photoelectric sensor | |
| Fabricantes | Omron Electronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de E3S-C (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
Oil-resistive, long-distance photoelectric sensor (metal case)
E3S-C
Achieves excellent water/oil-resistance
and long-distance detection.
Features
Meets IP67 tough standard water/oil resistance
E3S-C meets the IP67 requirements of the IEC standards and
6P of the NEMA standards. E3S-C can be used worry-free in
automotive assembly lines and other production lines where
oil vapor exists. It can also be applied to food processing lines
wbwewc.DauastaeSihtereets4iUs.tcsohmydrogen peroxide, detergent and potassi-
um hydroxide.
Sensing distance is six times longer than that of
conventional OMRON photoelectric sensor
The sensing distance of the E3S-C is six times longer than
that of the conventional, metal case type OMRON photoelec-
tric sensor. The through-beam, retrorefletive (with M.S.R.
function) and diffuse reflective models have sensing distanc-
es of 30, 3 and 2 meters, respectively.
Through-beam 5m
Model
E3S-5E4
Retroreflective
Model
2 m (non-polarized) E3S-R2E4
Diffuse
Reflective
Model
300mm
E3S-DS30E4
30m
3 m (polarized)
2m
Excellent shock resistance of 1,000 m/s2
The industry's top-class photoelectric sensor features shock re-
sistance of 1,000 m/s2, which is as high as that of a proximity sen-
sor at rated values, and vibration resistance of as high as 10 to
2,000 Hz. The E3S-C can be used worry-free in metal process-
ing, conveyor and other lines.
Lineup of M12 metal connector joint type models
Lineup of water/oil/shock-resistant M12 metal connector joint
type models are available. This series ensures ease of sensor
replacement during maintenance.
NPN/PNP output selector
The operation panel has the NPN/PNP out-
put selector. You need not prepare two
NPN and PNP models for export. You need
not worry about malfunctions due to noise,
either.
Mutual interference
prevention enhanced
PAT
Pending
FInirdsut sintrtyhe
(Retroreflective, diffuse reflective models)
Fuzzy inference is introduced into the mutual interference pre-
vention for the first time in the industry. This prevents a mal-
function due to mutual interference, enabling two sensors to
be mounted closely side by side.
Easy optical axis alignment
OMRON's original "automatic position compensation system"
minimizes misalignment of mechanical and optical axes to
merely ±2°. The optical axis is aligned perfectly by only install-
ing the sensor.
A-146
Photoelectric Sensors
1 page  
Output Circuit Diagram
NPN output
Model
Operating status of
output transistor
Timing chart
Mode selec-
tion switch
Output circuit
E3S-CT11(-M1J)
E3S-CT61(-M1J)
E3S-CR11(-M1J)
E3S-CR61(-M1J)
E3S-CD11(-M1J)
E3S-CD12(-M1J)
E3S-CD61(-M1J)
E3S-CD62(-M1J)
Light ON
Dark ON
Incident
Interrupted
Light
indicator
(red)
ON
OFF
Output
ON
transistor OFF
Load Operate
(Relay) Reset
(Between brown and black)
L∑ON
(LIGHT ON)
Incident
Interrupted
Light
indicator
(red)
ON
OFF
Output
ON
transistor OFF
Load Operate
(Relay) Reset
(Between brown and black)
D∑ON
(DARK ON)
Receiver (Through-beam Models)
Retroreflective, Diffuse Reflective, and Limited Reflective Models
Light
indicator
Stability
indicator
(red)
(green) Main
circuit
PNP
output transistor
NPN and PNP
output selector
ZD
*
Brown 10 to 30 VDC
1
Load Load current
Black
4 Control output
NPN
ZD
output transistor
Blue
3
0V
* Note: Set the NPN and PNP output selector to NPN.
Connector Pin Arrangement
1
24
3
Note: Terminal 2 is not used.
Emitter (Through-beam Models)
Emitter
indicator
(red)
Main
circuit
Brown
1
Blue
3
10 to 30 VDC
Connector Pin Arrangement
1
24
3
Note: Terminal 2 and 4 are not used.
PNP output
Model
Operating status of
output transistor
Timing chart
Mode selec-
tion switch
Output circuit
Light ON
E3S-CT11(-M1J)
E3S-CT61(-M1J)
wwEw3S.D-CaRta1S1(h-Mee1tJ4)U.com
E3S-CR61(-M1J)
Dark ON
E3S-CD11(-M1J)
E3S-CD12(-M1J)
E3S-CD61(-M1J)
E3S-CD62(-M1J)
Incident
Interrupted
Light
indicator
(red)
ON
OFF
Output
ON
transistor OFF
Load Operate
(Relay) Reset
(Between blue and black)
Incident
Interrupted
Light
indicator
(red)
ON
OFF
Output
ON
transistor OFF
Load Operate
(Relay) Reset
(Between blue and black)
L∑ON
(LIGHT ON)
D∑ON
(DARK ON)
Receiver (Through-beam Models)
Retroreflective, Diffuse Reflective, and Limited Reflective Models
Light
indicator
Stability
indicator
PNP
output transistor
ZD
Brown 10 to 30 VDC
1
(red)
(green) Main
circuit
NPN and PNP
output selector
Black
4
*
Load current
NPN
output transistor
ZD
Load Control output
Blue
3
0V
* Note: Set the NPN and PNP output selector to PNP.
Connector Pin Arrangement
1
24
3
Note: Terminal 2 is not used.
Emitter (Through-beam Models)
Emitter
indicator
(red)
Main
circuit
Brown
1
Blue
3
Connector Pin Arrangement
10 to 30 VDC
1
24
3
Note: Terminal 2 and 4 are not used.
Connectors (Sensor I/O connectors)
2
13
4
Pin No.
1
2
3
4
XS2F-D421-DC0-A
Brown
Blue
Black
ClaCcaslatsisosnifi- jWacirWkee,itroecuoctleoorlrorsCpoinnnCNeopniconnt.Noecort.or ApplicUasteion
For DCDC
BroBwronwn
-----
BluBelue
A (1)
B (2)
C (3)
+V+V
---- -
0V0V
BlaBclkack
D (4) OOutuptuptut
Note: TPeinrm2inisaol 2peisn.not used.
A-150
Photoelectric Sensors
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet E3S-C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E3S-A | (E3S-A/B) Bulti-in Amplifier Photoelectric Sensor |  Omron |
| E3S-A | Fotoschalter | Omron |
| E3S-B | Fotoschalter | Omron |
| E3S-B | (E3S-A/B) Bulti-in Amplifier Photoelectric Sensor | Omron |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |