|
|
Datasheet ET9571 Equivalent ( PDF ) |
N.º | Número de pieza | Descripción | Fabricantes | Category |
1 | ET9571 | 3-Ch. Diff. Amplifier-comparator 3 CHANNEL DIFFERENTIAL AMPLIFIER-COMPARATOR
(Phototransistor input version of the standard ET9570)
ET9571
FEATURES
• • • • • • Supply Voltage Range 4.5V to 30V Designed for phototransistor inputs Index channel gated by A and B Current sink for LED drive (see application note APP-D2) Ou | IC Haus | amplifier |
ET9 Datasheet ( Hoja de datos ) - resultados coincidentes |
N.º | Número de pieza | Descripción | Fabricantes | Catagory |
1 | ET9000 | 486 WRITE BACK CACHE AT SINGLE CHIP
www.Dat ETEQ data | | |
2 | ET9235 | Optimum CMOS IC General Description The ET9235 is an optimum CMOS IC which has been designed for electronization of volume control of audio equipment, etc.
Features Attenuation can be controlled from 0dB to 78dB by up, down input. This IC have 20dB tap for loudness circuit. Th Etek Microelectronics cmos | | |
3 | ET9260 | Optimum CMOS General Description The ET9260 is an optimum CMOS which has been designed for electronization of volume control of audio equipment,etc.
Features Attenuation can be controlled 0dB~-78dB by 2dB/step. This ICs feature a builtin loudness circuit.(20dB tap) The� Etek Microelectronics cmos | | |
4 | ET9364 | High performance white LED driver General Description The ET9364 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing an x1/x1.5 fractional charge pump and low dropout current sources. Th Etek Microelectronics led | | |
5 | ET9366 | Constant frequency charge pump DC/DC converter General Description The ET9366 is a low noise, constant frequency charge pump DC/DC converter for white LED applications. The ET9366 is capable of driving up to six channels of LEDs at preset 25mA per channel from a 2.5V to 6.0V input. The current sinks may Etek Microelectronics converter | | |
6 | ET9378 | Constant frequency 1x/1.33x charge pump DC/DC converter General Description The ET9378 is a low noise, constant frequency 1x/1.33x charge pump DC/DC converter for white LED applications. The ET9378 is capable of driving up to eight channels of LEDs at preset 19mA per channel from a 3.3V to 5.5V input. Under the sa Etek Microelectronics converter | | |
7 | ET9501 | Single Lithium-Ion or Lithium-Polymer cell linear battery charger General Description The ET9501 is a single LithiumIon or LithiumPolymer cell linear battery charger which is designed for compact and cost sensitive handheld devices. It combines charge status indication, charge termination, battery temperature monitoring, and h Etek Microelectronics battery | |
Esta página es del resultado de búsqueda del ET9571. Si pulsa el resultado de búsqueda de ET9571 se puede ver detalladamente sobre la hoja de datos, el circuito y la disposición de pin. |
Número de pieza | Descripción | Fabricantes | |
SPS122 | Modern EU gaming Machines require increased +12V current to accommodate the latest gaming peripherals. DC Converters have been engineered with Sanken’s latest technology to efficiently convert redundant power from our lamp gaming PSU and provide additional +12V capacity at the point of use. |
Sanken |
DataSheet.es | 2020 | Privacy Policy | Contacto | Sitemap |