FYH0H105ZF Datasheet PDF - Tokin
| Part Number | FYH0H105ZF | |
| Description | EXCELLENT VOLTAGE HOLDING CHARACTERISTICS | |
| Manufacturers | Tokin | |
| Logo |  |
|
|
There is a preview and FYH0H105ZF download ( pdf file ) link at the bottom of this page. Total 5 Pages | ||
Preview 1 page No Preview Available !
FY Series
FYD TYPE:
SMALL DIAMETER, EXCELLENT VOLTAGE HOLDING CHARACTERISTICS
FYH, and FYL TYPE: LOW PROFILE, EXCELLENT VOLTAGE HOLDING CHARACTERISTICS
The FY series includes small-size electric double-layer capacitors with excellent voltage holding character-
istics. The FYD type occupies only a small area on a printed circuit board, and the FYH and FYL types feature a low
profile in height, so that they can be used in various systems.
These capacitors are ideal as long-time backup devices for minute-current loads in small and lightweight systems.
Features
• Product variety makes the FYD, FYH, and FYL types suitable for use in many types of application systems.
• Excellent voltage holding characteristics ideal for backup of 1 μA to several hundred μA.
• Smaller than other Super Capacitors (25% Iess than FS series in volume)
• Capacitance ranges from low to high (0.01 F to 2.2 F).
Applications
• Backup of CMOS microcomputers, static RAMs, DTSs (digital tuning systems)
• Memory backup of remote controllers and handy cassette player during battery exchange
Part Number System
FYD 0H 473 Z F
Environmental Impact Reduced Product
Capacitance tolerance:
Z: +80%, –20%
Capacitance: 0.047 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow μF code.
www.DataSheet4U.com
Maximum Operating voltage:
0H: 5.5 VDC
Super Capacitor : FY series type
FYD : Small-diameter type
FYH and FYL : Low-profile type
Super Capacitors Vol.07 33
|
| |
 
Specifications: FY Series
Items
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series R esistance
Current (30-minutes Value)
Surge Voltage
Temperature
Variation of
Characteristics
Phase 2
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Solderability
Soldering Heat
Resistance
www.DataSheet4U.com
Temperature Cycle
Humidity Resistance
High Temperature Load
Voltage Holding
Characteristics
(Self Discharge)
Specifications
–25˚C to +70˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance
More than 90 % of initial requirement
Equivalent Series Resistance Less than 120% of initial requirement
Current at 30 minutes Less than 120% of initial requirement
Appearance
No obvious abnormality
Capacitance
Equivalent Series Resistance
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Capacitance
Equivalent Series Resistance
Current at 30 minutes
More than 50 % of initial value
Less than 400% of initial value
Less than 200% of initial value
Initial requirement
Less than 1.5 CV (mA)
Within ± 20% of initial value
Initial requirement
Initial requirement
No loosening nor permanent damage of the leads
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Appearance
Meet initial requirements
No obvious abnormality
3/4 or more of the pin of surface should be covered with the solder
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Appearance
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Visual appearance
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Appearance
Capacitance
Equivalent Series Resistance
Current at 30 minutes
Appearance
Meet initial requirements
No obvious abnormality
Shall meet initial requirements
No obvious abnormality
Within ±20% of initial value
Less than 120% of initial requirement
Less than 120% of initial requirement
No obvious abnormality
Within ±30% of initial value
Less than 200% of initial requirement
Less than 200% of initial requirement
No obvious abnormality
Voltage between terminal leads higher than 4.2 V.
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Conforms to 7.14
Surge voltage: 6.3 V
Temperature: 70 ± 2˚C
Charging for 30 seconds
Discharging for 9 min. 30 sec.
Number of cycles 1 000 cycles
Charge resistance :
0.01 F 1500 Ω 0.47 F 30 Ω
0.022 F 560 Ω 1.0 F 15 Ω
0.047 F 300 Ω 1.4 F 15 Ω
0.10 F 150 Ω 2.2 F 10 Ω
0.22 F 56 Ω
No discharge resistance
Conforms to 7.12
Phase 1: +25 ±2˚C
Phase 2: –25 ±2˚C
Phase 3: –40 ±2˚C
Phase 4: +25 ±2˚C
Phase 5: +70 ±2˚C
Phase 6: +25 ±2˚C
Conforms to 8.1.2 (1)
FYD0H105Z
FYD0H145Z
FYD0H225Z
FYH0H474Z
FYH0H105Z
⎫⎪⎪⎪⎬⎪⎪⎪⎭:
2.5
kg-f
10
±
1
sec.
Others:
1.0 kg-f 10 ± 1 sec.
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Time of test: 6 hours
Conforms to 8.4
Temperature of solder: 245 ± 5˚C
Time of immersion: 5 ± 0.5 second
To immerse capacitors up to 1.6
mm from the bottom
Conforms to 8.5
Temperature of solder: 260 ± 10˚C
Time of immersion: 10 ± 1 seconds
To immerse capacitors up to 1.6 mm
from the bottom
Conforms to 9.3
Temperature condition:
–25˚C → normal temperature
→ +70˚C → normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40 ± 2˚C
Humidity: 90 to 95% RH
Time of test: 240 ± 8 hours
Conforms to 9.10
Temperature: 70 ± 2˚C
Series resistance: 0 Ω
Applied voltage: 5.5 VDC
Time
of
test:
1000
+48
–0
hours
Charging
condition
Applied voltage: 5.0 VDC
Series resistance: 0 Ω
Curging time: 24 hours
Storage
Load: Nothing
Temperature: Lower than 25˚C
Humidity: Lower than 70% RH
Time: 24 hours
Super Capacitors Vol.07 37
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for FYH0H105ZF electronic component. |
| Information | Total 5 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ FYH0H105ZF.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| FYH0H105ZF | The function is EXCELLENT VOLTAGE HOLDING CHARACTERISTICS. Tokin | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
FYH0
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||