|
|
CO602のメーカーはVanlong Technologyです、この部品の機能は「Oven Controlled Crystal Oscillator」です。 |
部品番号 | CO602 |
| |
部品説明 | Oven Controlled Crystal Oscillator | ||
メーカ | Vanlong Technology | ||
ロゴ | |||
このページの下部にプレビューとCO602ダウンロード(pdfファイル)リンクがあります。 Total 1 pages
Clipped-Sine & HCMOS OCXO
wwwO.DavtaSehenet4CU.coomntrolled Crystal Oscillator
• Low power consumption
• Excellent temperature stabilities
• High stability overtone crystal
• Fast warm-up
CO602
Specifications:
Frequency Range:
2.0 MHz or 150.0 MHz
Operating Temperature:
Storage Temperature:
0°C ~ +50°C
-10°C ~ +45°C
-10°C ~ +55°C
-20°C ~ +60°C
-30°C ~ +70°C
-40°C ~ +85°C
-A
-B
-C
-D
-E
Frequency Stability:
Accuracy:
Vs. Temperature:
Short-Term Stability:
Aging Rate:
± 5 x 10-9
± 5 x 10-7
± 1 x 10-7
± 5 x 10-8
± 1 x 10-8
± 5 x 10-9
± 8 x 10-11
± 1 x 10-9
± 5 x 10-8
- 57
- 17
- 58
- 18
- 59
per second
per day
per year max
Output Waveform:
Clipped-Sine Wave, HCMOS
Output Level:
1.0 Vp-p min clipped-sine @ 1KΩ
TTL, HCMOS compatible
Phase Noise:
-100dBc/Hz
-130sBc/Hz
-140dBc/Hz
-145dBc/Hz
@ 10 Hz
@ 100 Hz
@ 1 KHz
@ 10 KHz
Harmonics Distortion:
-25 dB
Supply Voltage:
Supply Current:
+5.0 VDC (± 5%)
+12.0 VDC (± 5%)
-P
300mA max at warm-up
100mA max after warm-up at 25°C
Frequency Adjust:
±3.0 ppm tuning via ext potentiometer
CO-C
Pin Configurations
1 Vcc
2 Vref
3 Vc/Nc
4 Ground
5 Output
All dimensions are in mm
Ordering Information
Note:
1. Other frequencies, stabilities, and operating temperature ranges available.
Consult VTC Support for specific requirements.
2. Not all combinations of the above, stabilities, and temperature ranges are
available. Consult VTC Support if your requirement is not standard.
3. All specifications subject to change without notice.
Product name + Temperature + Stability +
Frequency + Other Specification Code.
i.e. CO602C18-10.0MHz
or CO602D58P-10.0MHz
Phone: +86 10 6301 4184
June 2001
Fax: +86 10 6301 9167
Email: [email protected]
Web: http://www.vanlong.com
Vanlong Technology Co., Ltd.
1 Page | |||
ページ | 合計 : 1 ページ | ||
|
PDF ダウンロード | [ CO602 データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
CO600 | Oven Controlled Crystal Oscillator | Vanlong Technology |
CO601 | Oven Controlled Crystal Oscillator | Vanlong Technology |
CO602 | Oven Controlled Crystal Oscillator | Vanlong Technology |
CO603 | Oven Controlled Crystal Oscillator | Vanlong Technology |