|
|
ISO-Ux-Px-Ox-SxのメーカーはShenzhen Sunyuanです、この部品の機能は「Loop Powered Signal Isolated Conditioner」です。 |
部品番号 | ISO-Ux-Px-Ox-Sx |
| |
部品説明 | Loop Powered Signal Isolated Conditioner | ||
メーカ | Shenzhen Sunyuan | ||
ロゴ | |||
このページの下部にプレビューとISO-Ux-Px-Ox-Sxダウンロード(pdfファイル)リンクがあります。 Total 3 pages
www.DataSheet4U.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
Signal Isolated Amplifier
ISO-U(A)-P-O-S series: DC V/I Signal Isolated Distributor
(Photoelectricity Isolation)
General characteristic:
Applications:
● Low cost,small size,SIP 12 anti- fire UL94V-0 package
●Two wires sensor distributor and signal transmission
● Can adjust “Zero”and “Gain”
● No distortion in long distance signal transmission
● Three-port (power/input/output) isolation:3000VDC
● Analog signal data acquisition
● Assistant power:5VDC/12VDC/15VDC/24VDC
● 4-20mA(0-20mA)/0-5V signal isolation and transfer
●0-5V/0-10Vvoltage signal or 0-10mA/0-20mA/4-20mA/ current signal ● Equipment and sensor signal acquisition
isolation and transfer
● Signal transmit no-distortion
● Input port with a isolated power supply
● Electric power,distant control,isolated safe bar
● with good anti-jamming and high frequency signal capability
● Ground interference control
Specification:
ISO-U(A)-O series is a hybrid integrated circuit, this IC isolates and transfers DC signal signa,and make them linear
correspondence to input signal.There is a isolated power supply on input port,and common ground with input signal.They are
widely used in Electric power, distant control, instrument, medical instrument, and industrial control industries.
Part number and description:
ISO- U(A)□ - P□ -O□ -S□
Input signal
Accessorial power supply P
Output
U1:0-5V
P1:DC24V
O1:4-20mA
U2:0-10V
P2:DC12V
O2:0~20mA
U3:0-75mV
P3: DC5V
O4:0~5V
U4:0-2.5V
P4:DC15V
O5:0~10V
U8: User-defined P8: User-defined
O6:1~5V
A1:0-1mA
O8:User-defined
A2:0-10mA
A3:0-20mA
A4:4-20mA
A8: User-defined
Example:
1: Input 0-5V ; power supply:24VDC ,Output :0-5V Isolated power supply:15V
Part number: ISO-U1-P1-O4-S2
2.Input:4-20mA, power supply:24VDC,Output:4-20mA Isolated power supply:24V
Part Nomber:ISO-A4-P1-O1-S3
Isolated P
S1:9V
S2:15V
S3:24V
Http:www.szsunyuan.com E-mail:[email protected]
1 Page www.DataSheet4U.com
SHENZHEN SUNYUAN TECHNOLOGY CO., LTD.
Signal Isolated Amplifier
Physical Dimensions and Footprint Description:
(1)voltage output footprint description:SIP 12
1 2 3 4 5 6 7 8 9 10 11 12
Vin+ GND
PO+ NO PIN PW+
PW- NO PIN Vo-
50K
50K
Vo+ NO PIN
(2)Current output footprint description:SIP 12
12 3 4 5 6 7
8
9 10
11 12
Vin+ GND
PO+ NO PIN PW+
PW+
Io+ NO PIN or Adj
Adj NO PIN or Io-
2K(ZERO) (50K) (50K) 2K(ZERO)
Note: only 0-xV or 0-xmA(such as:0-5V/0-20mA)input,4-20mA output products with ZERO adjustment.
Http:www.szsunyuan.com E-mail:[email protected]
3Pages | |||
ページ | 合計 : 3 ページ | ||
|
PDF ダウンロード | [ ISO-Ux-Px-Ox-Sx データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
ISO-Ux-Px-Ox-Sx | Loop Powered Signal Isolated Conditioner | Shenzhen Sunyuan |