DataSheet.jp

FAN2558 の電気的特性と機能

FAN2558のメーカーはFairchild Semiconductorです、この部品の機能は「(FAN2558 / FAN2559) 180mA Low Voltage CMOS LDO」です。


製品の詳細 ( Datasheet PDF )

部品番号 FAN2558
部品説明 (FAN2558 / FAN2559) 180mA Low Voltage CMOS LDO
メーカ Fairchild Semiconductor
ロゴ Fairchild Semiconductor ロゴ 




このページの下部にプレビューとFAN2558ダウンロード(pdfファイル)リンクがあります。

Total 15 pages

No Preview Available !

FAN2558 Datasheet, FAN2558 PDF,ピン配置, 機能
www.DataSheet4U.com
www.fairchildsemi.com
FAN2558/FAN2559
180mA Low Voltage CMOS LDO
Features
• Fixed 1.0V, 1.2V, 1.3V, 1.5V, 1.8V, 2.5V, 3.3V, 3.5V, 3.6V,
3.8V and Adjustable Output
• Power Good Indicator with Open Drain Output
• 180mA Output Current
• 100µA Ground Current
• Cbypass for Low Noise Operation
• Fast Enable for CDMA Applications
• High Ripple Rejection
• Current Limit
• Thermal Shutdown
• Excellent Line and Load Regulation
• Requires Only 1µF Output Capacitor
• Stable with 0 to 300mESR
• TTL-level Compatible Enable Input
• Active Output Discharge
Applications
• Processor Power-up sequencing
• PDAs, Cell Phones
• Portable Electronic Equipment
• PCMCIA Vcc and Vpp regulation/switching
General Description
The FAN2558/9 low voltage CMOS LDOs feature xed or
adjustable output voltage, 180mA load current, delayed
power good output (open drain) and 1% output accuracy
with excellent line and load regulation. An external bypass
capacitor provides ultra-low noise operation.
The FAN2558/9 low voltage LDOs incorporate both thermal
shutdown and short circuit protection. Output is stable with a
1µF, low ESR capacitor. The FAN2558/9 family is available
in 5-Lead SOT-23, 6-Lead SOT-23 and 2x2mm MLP-6
packages.
FAN2558: Fixed Output LDO with Power Good output
FAN2558ADJ: Adjustable Output LDO with Power Good
output
FAN2559: Fixed Output LDO with Power Good output,
Low Noise
Available standard output voltages are 1.0, 1.2V, 1.3V, 1.5V,
1.8V, 2.5V, 3.3V, 3.5V, 3.6V, and 3.8V. Custom output volt-
age options are also available.
Typical Application
47K
RPG
VFIBN VOUT
SHDN
GND
CAP+
ECNAP- PG
C OUT
47K
RPG
VFIBN VOUT
SHDN
GND ADJ
CAP+
ECNAP- PG
R1
R2
C OUT
47K
RPG
VFIBN VOUT
SHDN
GND CBYP
CAP+
ECNAP- PG
C OUT
C BYP
FAN2558
FAN2558ADJ
FAN2559
REV. 1.0.4 3/15/04

1 Page





FAN2558 pdf, ピン配列
www.DataSheet4U.com
PRODUCT SPECIFICATIONS
Absolute Maximum Ratings
Parameter
VIN to GND
Voltage on any other pin to GND
Junction Temperature (TJ)
Storage Temperature
Lead Soldering Temperature, 10 seconds
Power Dissipation (PD)
Electrostatic Discharge (ESD) Protection (Note1)
FAN2558/FAN2559
HBM
CDM
Min.
-0.3
-55
-65
4
1
Max.
6
VIN + 0.3
150
150
300
Internally
Limited
Units
V
V
°C
°C
°C
W
kV
Recommended Operating Conditions
Parameter
Min.
Supply Voltage Range, VIN for VOUT < 2.0V
Supply Voltage Range, VIN for VOUT 2.0V
Load Current
2.7
VOUT + VDROPOUT
Enable Input Voltage VEN
Power Good Output Voltage Range VPG
Junction Temperature
0
0
-40
Thermal Resistance-Junction to Ambient SOT-23 (Note 2)
Thermal Resistance-Junction to Case, 2mm x 2mm
6-lead MLP
Typ.
Max.
5.5
5.5
180
VIN
VIN
125
235
75
Units
V
V
mA
V
V
°C
°C/W
Notes:
1. Using Mil Std. 883E, method 3015.7 (Human Body Model) and EIA/JESD22C101-A (Charge Device Model)
2. Junction to ambient thermal resistance, ΘJC, is a strong function of PCB material, board thickness, thickness and number of
copper plains, number of via used, diameter of via used, available copper surface, and attached heat sink characteristics.
REV. 1.0.4 3/15/04
3


3Pages


FAN2558 電子部品, 半導体
www.DataSFhAeNe2t45U58.c/FoAmN2559
PRODUCT SPECIFICATIONS
Functional Description
Utilizing BiCMOS technology, the FAN2525/FAN2559
product family is optimized for use in compact battery pow-
ered systems. These LDOs offer a unique combination of
high ripple rejection, low noise, low power consumption,
high tolerance for a variety of output capacitors, and less
than 1µA “OFF” current. In the circuit, a differential current
sense amplier controls a series-pass P-Channel MOSFET to
achieve high ripple rejection. A separate error amplier com-
pares the load voltage at the output with an onboard trimmed
low voltage bandgap reference for output regulation.
Thermal shutdown and current limit circuits protect the
device under extreme conditions. When the device tempera-
ture reaches 150°C, the output is disabled. When the device
cools down by 10°C, it is re-enabled. The user can shut down
the device using the Enable control pin at any time. The cur-
rent limit circuit is trimmed, which leads to consistent power
on /enable delays, and provides safe short circuit current
densities even in narrow traces of the PCB.
A carefully optimized control loop accommodates a wide
range of ESR values in the output bypass capacitor, allowing
the user to optimize space, cost, and performance require-
ments.
An Enable pin shuts down the regulator output to conserve
power, reducing supply current to less than 1µA.
The xed-voltage FAN2559 has a noise bypass pin. Power
Good is available as a diagnostic function to indicate that the
output voltage has reduced within 5% of the nominal value.
The six pin adjustable-voltage version utilizes pin 5 to con-
nect to an external voltage divider which feeds back to the
regulator error amplier, thus setting the output voltage to
the desired value.
Applications Information
External Capacitors – Selection
The FAN2558/FAN2559 gives the user the exibility to uti-
lize a wide variety of capacitors compared to other LDOs.
An innovative design approach offers signicantly reduced
sensitivity to ESR, which degrades regulator loop stability in
older designs. While the improvements featured in the
FAN2558/FAN2559 family greatly simplify the design task,
capacitor quality still must be considered if the designer is to
achieve optimal circuit performance. In general, ceramic
capacitors offer superior ESR performance, and a smaller
case size than tantalum capacitors.
Input Capacitor
An input capacitor of 2.2µF (nominal value) or greater,
connected between the Input pin and Ground, placed in close
proximity to the device, will improve transient response and
ripple rejection. Higher values will further improve ripple
rejection and transient response. An input capacitor is rec-
ommended when the input source, either a battery or a regu-
lated AC voltage, is located far from the device. Any good
quality ceramic, tantalum, or metal lm capacitor will give
acceptable performance; however, in extreme cases capacitor
surge current ratings may have to be considered.
Output Capacitor
An output capacitor is required to maintain regulator loop
stability. Stable operation will be achieved with a wide vari-
ety of capacitors with ESR values ranging from 0mup to
400m. Multilayer ceramic, tantalum or aluminum electro-
lytic capacitors may be used. A nominal value of at least 1µF
is recommended. Note that the choice of output capacitor
affects load transient response, ripple rejection, and it has a
slight effect on noise performance as well.
An internal resistor of approximately 100is connected
between VOUT and GND in shutdown mode, to discharge the
output capacitor at a faster rate.
Bypass Capacitor (FAN2559 Only)
In the xed-voltage conguration, connecting a capacitor
between the bypass pin and ground can signicantly reduce
output noise. Values ranging from 0pF to 47nF can be used,
depending on the sensitivity to output noise in the applica-
tion.
At the high-impedance Bypass pin, care must be taken in the
PCB layout to minimize noise pickup, and capacitors must
be selected to minimize current loading (leakage). Noise
pickup from external sources can be considerable. Leakage
currents into the Bypass pin will directly affect regulator
accuracy and should be kept as low as possible; thus, high-
quality ceramic and lm types are recommended for their
low leakage characteristics. Cost-sensitive applications not
concerned with noise can omit this capacitor.
6 REV. 1.0.4 3/15/04

6 Page



ページ 合計 : 15 ページ
 
PDF
ダウンロード
[ FAN2558 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FAN2558

(FAN2558 / FAN2559) 180mA Low Voltage CMOS LDO

Fairchild Semiconductor
Fairchild Semiconductor
FAN2559

(FAN2558 / FAN2559) 180mA Low Voltage CMOS LDO

Fairchild Semiconductor
Fairchild Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap