DataSheet39.com

What is ISL3034E?

This electronic component, produced by the manufacturer "Intersil Corporation", performs the same function as "(ISL3034E - ISL3036E) Auto-direction Sensing Logic Level Translators".


ISL3034E Datasheet PDF - Intersil Corporation

Part Number ISL3034E
Description (ISL3034E - ISL3036E) Auto-direction Sensing Logic Level Translators
Manufacturers Intersil Corporation　
Logo Intersil Corporation Logo　


There is a preview and ISL3034E download ( pdf file ) link at the bottom of this page.





Total 16 Pages



Preview 1 page

No Preview Available ! ISL3034E datasheet, circuit

www.DataSheet4U.com
®
Data Sheet
ISL3034E, ISL3035E, ISL3036E
March 31, 2009
FN6492.0
4-Channel And 6-Channel High Speed,
Auto-direction Sensing Logic Level
Translators
The ISL3034E, ISL3035E, ISL3036E 4- and 6-channel
bi-directional, auto-direction sensing, level translators
provide the required level shifting in multi-voltage systems at
data transfer rates up to 100Mbps. The auto-direction
sensing feature makes the ISL3034E, ISL3035E, ISL3036E
ideally suited for memory-card level translation (or for
generic four to six channel level translation) especially if
bit-by-bit direction control is desired. The VCC and VL supply
voltages set the logic levels on either side of the device.
Logic signals present on the IC’s VL side appear as higher
voltage logic signals on the IC’s VCC side and vice versa.
The ISL3035E features a CLK_RET output that returns the
same clock signal applied to the CLK_VL input, but with
timing that mimics the data returning from the I/OVCC inputs.
The ISL3034E, ISL3035E, ISL3036E operate at full speed
with external input drivers that source as little as 4mA output
current. Each I/O channel is pulled up to VCC or VL by an
internal 30µA current source, allowing the ISL3034E,
ISL3035E, ISL3036E to be driven by either push-pull or
open-drain drivers.
The ISL3034E and ISL3036E include an enable (EN) input
that when driven low places the IC into a low-power
shutdown mode, with all I/O lines tri-stated. All versions
feature an automatic shutdown mode, that places the part in
the same shutdown state when VCC is less than VL. The
states of I/OVCC and I/OVL during shutdown are chosen by
selecting the appropriate product (see Table 1).
The ISL3034E, ISL3035E, ISL3036E operate with VCC
voltages from +2.2V to +3.6V and VL voltages from +1.35V
to +3.2V, making them ideal for data transfer between
low-voltage microcontrollers or ASICs and higher voltage
components.
TABLE 1. SUMMARY OF FEATURES
DATA NUMBER
PART RATE
OF
EN I/OVLSHDN
NUMBER (Mbps) CHANNELS PIN? STATE
I/OVCC
SHDN
STATE
ISL3034E 100
ISL3035E 100
6
YES 16.5kΩ
16.5kΩ
to VL
to VCC
6
NO 75kΩ to VL
High
Impedance
ISL3036E 100
4
YES 16.5kΩ
16.5kΩ
to VL
to VCC
Features
• Best-In-Class ESD Protection: ±15kV IEC61000-4-2 ESD
Protection on ALL Input, Output, and I/O Lines
• 100Mbps Guaranteed Data Rate
• Four (ISL3036) or Six (ISL3034, ISL3035) Bi-directional
Channels
• Auto-direction Sensing Eliminates Direction Control Logic
Pins
• Enable Input (ISL3034E, ISL3036E) for Logic Control of
Low Power SHDN Mode
• Clock Return Output (ISL3035E)
• Compatible with 4mA Input Drivers or Larger
• +1.35V ≤ VL ≤ +3.2V and +2.2V ≤ VCC ≤ +3.6V Supply
Voltage Range
• Pb-Free (RoHS Compliant)
• 16Ld µTQFN (2.6mmx1.8mm), 16 Ld TQFN (3mmx3mm),
and 14 Ld QFN (3.5mmx3.5mm) Packages
Applications
• Simplifies the Interface Between Two Logic ICs Operating
at Different Supply Voltages
• SD Card and MiniSD Card Level Translation
• MMC (Multi Media Card) Level Translation
• Memory Stick Card Level Translation
Typical Operating Circuit
+1.8V
0.1µF
+3.3V
0.1µF 1µF
+1.8V
SYSTEM
CONTROLLER
DAT3
DAT2
DAT1
DAT0
CMD
CLOCK
CLOCK_IN
VL VCC
ISL3035E
I/OVL I/OVCC
I/OVL I/OVCC
I/OVL I/OVCC
I/OVL I/OVCC
I/OVL I/OVCC
CLK_VLCLK_VCC
CLK_RET
+3.3V
SD CARD
DAT3
DAT2
DAT1
DAT0
CMD
CLOCK
GND
GND
GND
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

line_dark_gray
ISL3034E equivalent
ISL3034E, ISL3035E, ISL3036E
www.DEaletacSthreiceta4lUS.cpomecifications
PARAMETER
VCC = +2.2V to +3.6V, VL = +1.35V to +3.2V, EN = VL, unless otherwise noted. Typical values are at
VCC = +3.3V, VL = +1.8V and TA = +25°C. (Note 6). (Continued)
SYMBOL
TEST CONDITIONS
TEMP MIN
MAX
(°C) (Note 8) TYP (Note 8) UNITS
ESD PROTECTION
All Input and I/O Pins From Pin to
GND
IEC61000-4-2 Air-Gap Discharge
IEC61000-4-2 Contact Discharge
25 - ±15 - kV
25 - >±9 - kV
Human Body Model
25 - ±15 - kV
All Pins
HBM, per JEDEC
25
- >±12
-
kV
Machine Model, per JEDEC
25
- ±1300
-
V
LOGIC-LEVEL THRESHOLDS
I/OVL, CLK_VL Input Voltage
High Threshold
VIHL (Note 7)
Full -
- VL - 0.2 V
I/OVL, CLK_VL Input Voltage
Low Threshold
VILL (Note 7)
Full 0.15
-
-V
I/OVCC, CLK_VCC Input Voltage
High Threshold
VIHC (Note 7)
Full -
- VCC - 0.4 V
I/OVCC, CLK_VCC Input Voltage
Low Threshold
VILC (Note 7)
Full 0.2
-
-V
EN Input Voltage High Threshold
EN Input Voltage Low Threshold
I/OVL, CLK_RET Output Voltage
High
VIH
VIL
VOHL
IOH = 20µA, I/OVCC ≥ VCC - 0.4V
Full -
Full 0.4
- VL - 0.4 V
- -V
Full 2/3 VL
-
-V
I/OVL, CLK_RET Output Voltage
Low
VOLL IOL = 20µA, I/OVCC ≤ 0.2V
Full -
-
1/3 VL
V
I/OVCC, CLK_VCC Output
Voltage High
VOHC IOH = 20µA, I/OVL ≥ VL - 0.2V
Full 2/3 VCC -
-V
I/OVCC, CLK_VCC Output
Voltage Low
VOLC IOL = 20µA, I/OVL ≤ 0.15V
Full -
- 1/3 VCC V
RISE/FALL TIME ACCELERATOR STAGE
Accelerator Pulse Duration
On falling edge
25 - 3
- ns
On rising edge
25 - 3
- ns
I/OVL, CLK_RET Output
Accelerator Source Impedance
VL = 1.62V
VL = 3.2V
25 - 11 - Ω
25 - 6
-Ω
I/OVCC, CLK_VCC Output
Accelerator Source Impedance
VCC = 2.2V
VCC = 3.6V
25 - 9
25 - 8
-Ω
-Ω
I/OVL, CLK_RET Output
Accelerator Sink Impedance
VL = 1.62V
VL = 3.2V
25 - 9
25 - 8
-Ω
-Ω
I/OVCC, CLKVCC Output
Accelerator Sink Impedance
VCC = 2.2V
VCC = 3.6V
25 - 10 - Ω
25 - 9
-Ω
TIMING CHARACTERISTICS (RSOURCE = 150Ω, Input rise/fall time ≤ 1ns)
I/OVCC, CLK_VCC Rise Time
tRVCC RS = 150Ω, CI/OVCC = 10pF, CCLK_VCC = 10pF,
push-pull drivers
Full
-
- 3.2 ns
I/OVCC, CLK_VCC Fall Time
I/OVL, CLK_RET Rise Time
tFVCC
tRVL
RS = 150Ω, CI/OVCC = 10pF, CCLK_VCC = 10pF
RS = 150Ω, CI/OVL = 15pF,
VL ≥ 1.35V
CCLK_RET = 15pF, push-pull drivers VL ≥ 1.62V
Full
Full
Full
-
-
-
- 3.2 ns
- 4 ns
- 3.5 ns
5 FN6492.0
March 31, 2009


line_dark_gray

Preview 5 Page


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for ISL3034E electronic component.


Information Total 16 Pages
Link URL [ Copy URL to Clipboard ]
Download [ ISL3034E.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
ISL3034EThe function is (ISL3034E - ISL3036E) Auto-direction Sensing Logic Level Translators. Intersil CorporationIntersil Corporation

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

ISL3     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search