DataSheet.jp

HE3 の電気的特性と機能

HE3のメーカーはVishay Siliconixです、この部品の機能は「Wet Tantalum Capacitors Tantalum-Case」です。


製品の詳細 ( Datasheet PDF )

部品番号 HE3
部品説明 Wet Tantalum Capacitors Tantalum-Case
メーカ Vishay Siliconix
ロゴ Vishay Siliconix ロゴ 




このページの下部にプレビューとHE3ダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

HE3 Datasheet, HE3 PDF,ピン配置, 機能
HE3
www.DVaitasShheaeyt4U.com
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
for - 55 °C to + 125 °C Operation
FEATURES
Vishay HE3 represents a major breakthrough in
wet tantalum capacitor technology for high-energy Pb-free
applications. The unique case design provides for Available
the highest capacitance per unit volume. The HE3 RoHS*
also utilizes the proven hybrid technology of our COMPLIANT
SuperTan® product.
The HE3 is housed in an all tantalum, hermetically sealed
case, and is manufactured to withstand high stress and
hazardous environments. The design provides a unique
double seal for improved reliability and performance.
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55 °C to + 85 °C (to + 125 °C with voltage derating)
Capacitance Tolerance:
At 120 Hz, + 25 °C ± 20 % standard
± 10 % available as special
Contact Marketing for Availability of 10 % Tolerance
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings tables.
Life Test:
Capacitors are capable of withstanding a 1000 h life test at a
temperature of + 85 °C at the applicable rated DC working
voltage.
ORDERING INFORMATION
HE3 C
543
K
TYPE
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
025
DC VOLTAGE
RATING AT + 85 °C
BZ
TERMINATION RELIABILITY
AND PACKAGING LEVEL
S
TEMPERATURE
S
ESR
See Ratings
and Case
Code Table
This is expressed in
microfarads. The
first two digits are
the significant
figures. The third is
the number of zeros
to follow.
K = 10 % (1)
M = 20 %
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V)
A = 100 % Tin
(RoHS compliant)
B = Tin/lead
and bulk
Z = Non-ER S = Standard
S=
(- 55 °C to + 85 °C) Standard
Note
(1) Contact marketing for availability of 10 % tolerance
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
100
For technical questions, contact: [email protected]
Document Number: 42089
Revision: 30-Jun-08

1 Page





HE3 pdf, ピン配列
HE3
www.DVaitasShheaeyt4U.com
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
for - 55 °C to + 125 °C Operation
PERFORMANCE CHARACTERISTICS OF HIGH ENERGY CAPACITORS
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Operating Temperature Range
- 55 °C to + 85 °C (to + 125 °C with voltage derating)
Capacitor Tolerance
± 20 % ± 10 % at 120 Hz
ESR
Limits per Standard Ratings Table
DC Leakage Current (DCL max.)
At 25 °C the leakage current shall not exceed values listed in the Standard Rating table.
Reverse Voltage
No continuous reverse voltage permitted
Surge Voltage
The test shall be at 1000 cycles at 110 % of rated voltage at 85 °C. A cycle consists of a one
and one half (1.5) min charge and a four and one half (4.5) min discharge through 100 Ω
resistor.
Life Test at + 85 °C
1000 h at + 85 °C
ENVIRONMENTAL CHARACTERISTICS
ITEM
TEST and CONDITIONS
Hermeticity
MIL-STD-202, Method 112
C/IIIa
Moisture Resistance
MIL-STD-202, Method 106
Altitude
MIL-STD-202, Method 105 C,
Test Condition D
COMMENTS
The capacitor shall be hermetically sealed such that the case does not
leak electrolyte or vent any gas when exposed to a vacuum.
100 000 feet test
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
TEST and CONDITIONS
COMMENTS
Thermal Shock
MIL-STD-202, Method 107 G
Shock
MIL-STD-202, Method 213 B
Test Condition G
11 ms, 50 g
Vibration - High
Frequency
MIL-STD-202, Method 204 D
Test Condition D
12 sweeps/axis, 20 g peak
Vibration - Random
MIL-STD-202, Method 214 A
Test condition I, Letter D
1.5 h/axis, 12 g
Resistance to solder
Heat
MIL-STD-202, Method 210 F
The capacitor must withstand solder dipping of the terminals at 260 °C
for 10 s. The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Solderability
ANSI J-STD-002
Terminal Strength
MIL-STD-202, Method 211 A
The capacitor terminals must withstand a 5 pound pull test for 5 to 10 s.
The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
Part Markings
MIL-STD-202, Method 215 J
The capacitor shall be permanently and legibly marked on the
circumference of the case. The markings shall be resistant to solvents.
Weight (Mass)
See dimensions table, page 2
www.vishay.com
102
For technical questions, contact: [email protected]
Document Number: 42089
Revision: 30-Jun-08


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ HE3 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HE12F120

High efficiency fast silicon rectifier diode

Semikron International
Semikron International
HE12FA

(HE12FA - HE12FD) High efficiency fast silicon rectifier diode

Semikron International
Semikron International
HE12FB

(HE12FA - HE12FD) High efficiency fast silicon rectifier diode

Semikron International
Semikron International
HE12FD

(HE12FA - HE12FD) High efficiency fast silicon rectifier diode

Semikron International
Semikron International


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap