|
|
PDF MP120Dxx Data sheet ( Hoja de datos )
| Número de pieza | MP120Dxx | |
| Descripción | Soild State Relay | |
| Fabricantes | Opto 22 | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MP120Dxx (archivo pdf) en la parte inferior de esta página. Total 18 Páginas | ||
|
No Preview Available !
Solid-State Relays
Features
Rugged, epoxy encapsulation construction
4,000 volts of optical isolation
www.datasheet4u.com
Subjected to full load test and six times the rated
current surge before and after encapsulation
Unique heat-spreader technology
UL and CSA recognized*
Description
Opto 22 Power
Series SSR
Overview
In 1974, Opto 22 introduced the first liquid epoxy-filled line of
power solid-state relays (SSR). This innovation in SSR design greatly
improved the reliability and reduced the cost of manufacturing. At
that time, we also incorporated into our manufacturing process
100% testing under full load conditions of every relay we produced.
By 1978, Opto 22 had gained such a reputation for reliability that
we were recognized as the world’s leading manufacturer of solid-
state relays. Through continuous manufacturing improvements and
the same 100% testing policy established over 30 years ago,
Opto 22 is still recognized today for the very high quality and
reliability of all our solid-state relays.
Opto 22 offers a complete line of SSRs, from the rugged 120/240/
380-volt AC Series to the small footprint MP Series, designed for
mounting on printed circuit boards. All Opto 22 SSRs feature 4,000
volts of optical isolation and are UL and CSA recognized.* The
innovative use of room-temperature liquid epoxy encapsulation,
coupled with Opto 22’s unique heat-spreader technology, are key to
mass producing the world’s most reliable solid state relays.
Every Opto 22 solid state relay is subjected to full load test and six
times the rated current surge both before and after encapsulation.
This double testing of every part before it leaves the factory means
you can rely on Opto 22 solid state relays. All Opto 22 SSRs are
guaranteed for life.
Part Numbers
Part Description Part Description
120A10
120A25
240A10
240A25
240A45
120D3
120D10
120D25
120D45
240D3
240D10
240Di10
240D25
240Di25
240D45
240Di45
380D25
380D45
120 VAC, 10 Amp, AC Control
480D10-12
120 VAC, 25 Amp, AC Control
480D15-12
240 VAC, 10 Amp, AC Control
480D25-12
240 VAC, 25 Amp, AC Control
480D45-12
240 VAC, 45 Amp, AC Control
575D15-12
120 VAC, 3 Amp, DC Control
575D45-12
120 VAC, 10 Amp, DC Control
575Di45-12
120 VAC, 25 Amp, DC Control
120 VAC, 45 Amp, DC Control
Z120D10
240 VAC, 3 Amp, DC Control
Z240D10
240 VAC, 10 Amp, DC Control
MP120D2
or P120D2
240 VAC, 10 Amp, DC Control, with LED Indicators MP120D4
240 VAC, 25 Amp, DC Control
or P120D4
240 VAC, 25 Amp, DC Control, with LED Indicators MP240D2
240 VAC, 45 Amp, DC Control
or P240D2
240 VAC, 45 Amp, DC Control, with LED Indicators
MP240D4
or P240D4
380 VAC, 25 Amp, DC Control
MP380D4
380 VAC, 45 Amp, DC Control
480 VAC, 10 Amp, DC Control, Transient Proof
480 VAC, 15 Amp, DC Control, Transient Proof
480 VAC, 25 Amp, DC Control, Transient Proof
480 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 15 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof
575 VAC, 45 Amp, DC Control, Transient Proof,
with LED Indicators
Z Model, 120 VAC, 10 Amp, DC Control
Z Model, 240 VAC, 10 Amp, DC Control
120 VAC, 2 Amp, DC Control.
P model is low profile.
120 VAC, 4 Amp, DC Control.
P model is low profile.
240 VAC, 2 Amp, DC.
P model is low profile.
240 VAC, 4 Amp, DC.
P model is low profile.
380 VAC, 4 Amp, DC
* UL recognition is pending for Power Series SSRs with LED indicators.
Contact Opto 22 Product Support for current UL information.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected] • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2008 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1
1 page  
Solid-State Relays
AC Power Series Specifications
480/575 Volt
www.datasheet4u.com
Model
Number
Nominal Nominal 1 cycle Nominal
AC Line Current Surge Signal Input
Voltage Rating (Amps) Resistance
(Amps) Peak (Ohms)
Signal
Pick-up
Voltage
Signal Peak Maximum Off-State Operating I2t
Drop-out Repetitive Output Leakage Voltage Rating
Voltage Voltage Voltage (mA)
Range t=8.3
Maximum Drop Maximum** (Volts AC) (ms)
Isolation
Voltage
θjc* Dissipation
(°C/Watt) (Watts/Amp)
480D10-12 480
10 110
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts
11 mA 100–530 50 4,000VRMS 1.2
2.5
480D15-12 480
15 150
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts
11 mA 100–530 50 4,000VRMS 1.2
2.5
480D25-12 480
25 250
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts
11 mA 100–530 250 4,000VRMS 1.3
1.3
480D45-12 480
45 650
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts
11 mA 100–530 1750 4,000VRMS 0.67
0.9
575D15-12 575
15 150
1000
3VDC
1 VDC
(32V allowed)
1200
3.2 volts
15 mA 100–600 90 4,000VRMS 1.2
2.5
575D45-12 575
45 650
1000
3VDC
1 VDC
(32V allowed)
1000
1.6 volts
15 mA 100–600 1750 4,000VRMS 0.67
0.9
575Di45-12 575
45 650
730
3VDC
1 VDC 1000 1.6 volts 15 mA 100–600 1750 4,000VRMS 0.67
(32V allowed)
0.9
Note: θjc* = Thermal resistance junction to base. Maximum junction temperature is 110 °C.
** Operating Frequency: 25 to 65 Hz (operates at 400 Hz with 6 times the offstate leakage)
Surge Current Data
Thermal Ratings
Time
Second
Time***
(Cycles)
10-Amp
Peak
Amps
15-Amp
Peak
Amps
25-Amp
Peak
Amps
45-Amp
Peak
Amps
0.017
1
110 150 250 650
0.050
3
85 140 175 420
0.100
6
70 110 140 320
0.200
12
60
90 112 245
0.500
30
50
70
80 175
1 60 40 55 67 134
2 120 33 49 53 119
3 180 32 47 49 98
4 240 31 43 47 95
5 300 30 40 45 91
10 600 28 35 42 84
Note: ***60 HZ
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected] • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2008 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
5
5 Page 
Solid-State Relays
Dimensional Drawings
www.datasheet4u.com
Side view: Part numbers DC60S3,
120D3, and 240D3 only
Side view: All other part numbers
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • [email protected] • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • [email protected]
© 2006–2008 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
11
11 Page | ||
| Páginas | Total 18 Páginas | |
| PDF Descargar | [ Datasheet MP120Dxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MP120Dxx | Soild State Relay | Opto 22 |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |