E39 Datasheet PDF - Omron Electronics
| Part Number | E39 | |
| Description | Fiber-Optic Accessories | |
| Manufacturers | Omron Electronics | |
| Logo |  |
|
|
There is a preview and E39 download ( pdf file ) link at the bottom of this page. Total 6 Pages | ||
Preview 1 page No Preview Available !
www.datasheet4u.com
Fiber-Optic Accessories
Various Accessories Expand the
Usefulness of the Fiber-Optic Cables
Lenses extend sensing distances
Side-view attachments provide space
savings
Flexible stainless steel tubes protect
plastic fibers from mechanical damage
Thin fiber adapters as replacement
Splices for 2.2 mm fiber can be used to
repair cut fiber
E39
Ordering Information
ATTACHMENTS
Description
Focusing lens pair (use with E32-TC50/200/500/1000, E32-T11(L), E32-TC200C, E32-T61)
Side-view reflector pair
Convergent beam conversion kit (to fit fibers that accept E39-F1 lenses)
Pinpoint focusing lens (for E32-D32)
Side-view diffuse reflective conversion kit (for through-beam fibers)
Part number
E39-F1
E39-F2
E39-F3
E39-F3A
E39-F5
PROTECTIVE STAINLESS STEEL FLEXIBLE TUBES FOR PLASTIC FIBERS
Description
E32-DC200E, E32-DC200F(4), E32-D21, E32-D21L
E32-DC200, E32-DC200B(4), E32-CC200, E32-D11
E32-D11L, E32-D51
E32-TC200E, E32-TC200F(4), E32-T21, E32-T12L
E32-TC200, E32-TC200B(4), E32-T11, E32-T11L,
E32-T51L
Appearance
Single tubes
Pairs
Length (L)
0.5 m
1m
0.5 m
1m
0.5 m
1m
0.5 m
1m
Part number
E39-F32A5
E39-F32A
E39-F32D5
E39-F32D
E39-F32B5
E39-F32B
E39-F32C5
E39-F32C
ADAPTERS/REPAIR PARTS
Description
Thin fiber adapter (1.0 mm to 2.2 mm dia.)
Splice for 2.2 mm dia. fiber (except E32-T51/E32-D51)
Fiber cutting tool (supplied with each trimmable plastic fiber optic cable)
Fiber probe bending tool
Mounting bracket replacement for E32-T16 (order two)
Part number
E39-F9
E39-F10
E39-F4
E39-F11
E39-L4
|
| |
 
www.datasheet4u.com
E39
E39-F2 Side View Attachment
These attachments provide 90 angle
viewing for through-beam cables. Use
then with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables and E32-
T61 glass filament cables. Screw each
piece onto the threaded tip of each
sensing head.
Note: This attachment does not increase sensing distance.
E39
E39-F3 Diffuse Reflective Conversion Bracket
This bracket converts through-beam fiber
cables for diffuse reflective sensing. Use it
with E32-TC50, E32-TC200 and E32-
TC200C plastic filament cables. A set of
E39-F1 lenses are supplied with this
conversion bracket. To install, first remove
the mounting nuts from the fiber-optic
sensing heads. Then loosen the two set
screws on the bracket. Insert the sensing
ends through the bracket, then attach the
lenses. Tighten the two set screws to hold
the sensing heads in place. Mount the
bracket at the detection site, then loosen
the large center screw to adjust the angle.
When the angle that produces reliable
detection has been found, tighten the
screw to retain that angle.
E39-F3A Reflective Unit Lens (for E32-D32 Fiber)
When E39-F3A is attached to an E32-D32
fiber, adjust the focal point so that the
amplifier will not detect its own light
reflected from inside the E39-F3A.
Place the object to be detected or while
paper at the sensing distance, then adjust
the insertion depth of the fiber into the
E39-F3A so that the light spot is as small
as possible. Then fasten the sensing head
using the Allen head wrench supplied with
the E39-F3A.
In the example shown,
A = The focus is farther than the E39-F3A
B = The focus is closer than the E39-F3A.
E39-F5 Diffuse Reflective Side View Conversion Block
This reflective side view block may be
used with E32-TC200A plastic filament
fiber-optic cable only. It provides a 2 cm
(0.79 in) sensing distance. To install, first
remove mounting nuts and washers from
fiber-optic sensing head. Then, screw the
threaded heads as far as they will go onto
the mounting holes on the narrow side of
the block.
5
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for E39 electronic component. |
| Information | Total 6 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ E39.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| E30 | The function is Miniature LEDs. Gilway Technical Lamp |  |
| E301 | The function is Diode ( Rectifier ). American Microsemiconductor |  |
| E304-12V | The function is T-1 and T-1 3/4/ Infrared LEDs. Gilway Technical Lamp | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
E39
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||