DataSheet.jp

IEC947-5-1 の電気的特性と機能

IEC947-5-1のメーカーはSchneider Electricです、この部品の機能は「Limit Switches」です。


製品の詳細 ( Datasheet PDF )

部品番号 IEC947-5-1
部品説明 Limit Switches
メーカ Schneider Electric
ロゴ Schneider Electric ロゴ 




このページの下部にプレビューとIEC947-5-1ダウンロード(pdfファイル)リンクがあります。

Total 1 pages

No Preview Available !

IEC947-5-1 Datasheet, IEC947-5-1 PDF,ピン配置, 機能
Limit Switches
XCKML—General Specifications and Complete Devices
www.SquareD.com
For the most up-to-date information
www.DataSheet4U.com
2 N.O. and 2 N.C. Direct Opening
Snap Action Contacts
Rated Power
Conforms to IEC 947-5-1
Duty Categories AC15 and DC13.
XCKML is a general duty limit switch, larger than the XCKL, for applications such as machine tools, material
handling, and other applications where electrical redundancy and contact state signaling are required.
Key features include:
2 normally closed direct opening and two normally open snap action contacts available in 4 head styles
Direct opening contacts standard: snap action 2-pole (isolated N.O. + N.C.) or slow-make-slow-break
2-pole (isolated N.O. + N.C.)
4 position indexing rotary head (field convertible)
Captive screws and gaskets
Captive saddle clamp terminals
Feature FINGERSAFE® contact block
Lever operated—positive lever to shaft positioning to ensure the direct opening feature. Direct
opening contacts meet IEC 947-5-1 requirements for positive opening contacts.
Plunger operated: top rod, top roller
Metal type, IP66
Complete switches with 3 cable entries
Tapped for 13 mm cable gland, DE9RA1212 adapter to 12" NPT included
UL Listed CSA Certified, IEC, VDE, CENELEC and other international approvals, CE
Selection Table
Type of Operating Head
Characteristics
Conforming to
standards
Products
IEC 947-5-1, EN 60 947-5-1
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Protective treatment
Standard version: “TC”
Ambient air temperature
Operation: -25 to +70° C
Resistance
to vibration
to shocks
25 gn (10 to 500 Hz) conforming to IEC 68-2-6
50 gn conforming to IEC 68-2-27
Electric shock protection
Class I conforming to IEC 536 and NF C 20-030
Degree of protection
IP66 conforming to IEC 529; IP65 conforming to NF C 20-010
Minimum force of for tripping
15 N
torque
for positive opening 60 N
12 N
50 N
8N
50 N
0.2 N.m
0.5 N.m
Maximum actuation speed
0.5 m/s
0.5 m/s
1.5 m/s
1.5 m/s
Switch actuation
On end
By 30° cam
Repeat accuracy
± 0.1 mm on the tripping points
Rated operational characteristics
~ AC-15; A300 or Ue = 240 V, le = 3 A (for make and break ratings see XCKL page 19-20)
DC-13; Q300 or Ue—250 V, le = 0.27 A conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage
Ui = 500 V degree of pollution 3 conforming to IEC 947-1
Rated impulse withstand voltage
U imp = 6 kV conforming to IEC 947-1, IEC 664
Positive operation
N.C. contacts with direct opening operation conforming to IEC 947-5-1 Appendix K, EN 60 947-5-1
Short-circuit protection
10 A cartridge fuse gG (gl)
Cable entry
3 tapped entries for 13 mm cable glands conforming to NFC 68-300 (DIN Pg 13.5). Clamping capacity
9 to 12 mm.
Cabling
Screw and captive cable clamp terminals.
Clamp capacity: minimum 1 x 0.34 mm2, maximum: 2 x 1.5 mm2 or 1 x 2.5 mm2 depending on contact.
Tightening torque: minimum 0.8 Nm, maximum 1.2 Nm
Note:Heads use the same lever as those used on the XCKL line. For direct opening operation use rigid operators. For characteristics of XESP••• and
XENP••• contact blocks, please refer to our Limit Switch catalog 9007CT9701. (Only the heads shown below are UL Listed.)
Plunger
Rotary
Type of operator
Metal end plunger
References ( N.C. contact with direct opening operation)
Steel roller plunger
Thermoplastic roller
lever plunger. Horizontal
actuation in 1 direction
Thermoplastic
roller lever a
Two contact blocks,
2-pole 1 N.C. + 1 N.O.
snap action
AB
3 entries 13 mm
XCKML110
$88.
Two contact blocks,
2-pole 1 N.C. + 1 N.O.
break before make,
slow break
AB
3 entries 13 mm
XCKML510
$88.
Weight (kg)
0.400
a Adjustable throughout 360° in 5° steps, or in 90° steps by reversing the notched washer.
b Do not replace head. Order complete unit.
XCKML102
$108.
XCKML121
$108.
XCKML115
$91.
XCKML502
$108.
0.405
XCKML521
$108.
0.450
XCKML515
$91.
0.430
For additional information, reference Catalog #9006CT0101.
19-22
9/8/03
T
Discount
Schedule
© 2003 Schneider Electric
All Rights Reserved
9/8/03

1 Page







ページ 合計 : 1 ページ
 
PDF
ダウンロード
[ IEC947-5-1 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
IEC947-5-1

Limit Switches

Schneider Electric
Schneider Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap