DataSheet.jp

AAT3783 の電気的特性と機能

AAT3783のメーカーはAdvanced Analogic Technologiesです、この部品の機能は「1-A Linear Li-Ion/Polymer Battery Charger」です。


製品の詳細 ( Datasheet PDF )

部品番号 AAT3783
部品説明 1-A Linear Li-Ion/Polymer Battery Charger
メーカ Advanced Analogic Technologies
ロゴ Advanced Analogic Technologies ロゴ 




このページの下部にプレビューとAAT3783ダウンロード(pdfファイル)リンクがあります。

Total 20 pages

No Preview Available !

AAT3783 Datasheet, AAT3783 PDF,ピン配置, 機能
PRODUCT DATASHEET
AAT3783
BatteryManagerTM 1-A Linear Li-Ion/Polymer Battery Charger with 28V Over-Voltage Protection
www.DataSheet4U.com
General Description
The AAT3783 BatteryManager™ is a single-cell Lithium-
Ion (Li-Ion)/Li-Polymer battery charger IC, designed to
operate from USB ports, AC adapter inputs, or from a
charger adapter up to an input voltage of 6.5V. For
increased safety, the AAT3783 also includes over-voltage
input protection (OVP) up to 28V.
The AAT3783 precisely regulates battery charge voltage
and current for 4.2V Li-Ion/Polymer battery cells through
an extremely low RDS(ON) switch. When charged from an
adapter or a USB port, the battery charging current can
be set by an external resistor up to 1A. In the case of an
over-voltage condition in excess of 6.5V, a series switch
opens preventing damage to the battery and charging
circuitry. With the addition of an external resistor the
OVP trip point can be programmed to a level other than
the factory set value of 6.5V. In the case of an OVP con-
dition a fault flag is activated.
Battery charge state is continuously monitored for fault
conditions. In the event of an over-current, battery over-
voltage, short-circuit or over-temperature failure, the
device will automatically shut down, thus protecting the
charging device, control system and the battery under
charge. A status monitor output pin is provided to indi-
cate the battery charge status by directly driving an
external LED. An open-drain power-source detection
output (ADPP) is provided to report the power supply
status.
The AAT3783 comes in a thermally enhanced, space-
saving, Pb-free 16-pin 3x4 mm TDFN package and is
specified for operation over the -40°C to +85°C tem-
perature range.
Features
• USB or AC Adapter System Power Charger
• Programmable from 100mA to 1A Max
• 4.0V ~ 7.5V Input Voltage Range
Over-Voltage Input Protection up to 28V
• High Level of Integration with Internal:
Charging Device
Reverse Blocking Diode
Current Sensing
• Digital Thermal Regulation
• Charge Current Programming (ISET)
• Charge Termination Current Programming (TERM)
• Charge Timer (CT)
• Battery Temperature Sensing (TS)
• TS Pin Open Detection
• Automatic Recharge Sequencing
• No Trickle Charge Option Available
• Full Battery Charge Auto Turn Off / Sleep State /
Charge Termination
• Automatic Trickle Charge for Battery Pre-conditioning
• Battery Over-Voltage and Over-Current Protection
• Emergency Thermal Protection
• Power On Reset
• 16-pin 3x4mm TDFN Package
Applications
• Bluetooth™ Headsets, Headphones, Accessories
• Digital Still Cameras
• Mobile Phones
• MP3 Players
• Personal Data Assistants (PDAs)
• Other Li-Ion/Polymer Battery Powered Devices
Typical Application
VIN
2.2μF
Enable Charging
Enable OVP
IN BATS
IN BAT
FLT AAT3783
OVP
INCHR
TS
STAT
ADPP
ENCHR
CT
TERM
ISET
ENOVP GND
10μF
RSET
BATT+
BATT-
TEMP
Battery
Pack
RTERM
CT
3783.2008.08.1.2
www.analogictech.com
1

1 Page





AAT3783 pdf, ピン配列
PRODUCT DATASHEET
AAT3783
BatteryManagerTM 1-A Linear Li-Ion/Polymer Battery Charger with 28V Over-Voltage Protection
www.DataSheet4U.com
Absolute Maximum Ratings1
Symbol
VIN
VINCHR
VFLT
VN
TJ
TLEAD
Description
IN continuous
Charger IN continuous
Fault ag continuous
BAT, STAT, ADPP, EN, ISET, TS, ENOVP, OVP
Operating Junction Temperature Range
Maximum Soldering Temperature (at Leads)
Value
30
-0.3 to 7.5
-0.3 to +30
-0.3 to VINCHR + 0.3
-40 to 150
300
Units
V
V
V
V
°C
°C
Thermal Information2
Symbol
θJA
PD
Description
Maximum Thermal Resistance (TDFN 3x4)
Maximum Power Dissipation
Value
50
2
Units
°C/W
W
1. Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at conditions other than the operating conditions
specified is not implied. Only one Absolute Maximum Rating should be applied at any one time.
2. Mounted on a FR4 board.
3783.2008.08.1.2
www.analogictech.com
3


3Pages


AAT3783 電子部品, 半導体
PRODUCT DATASHEET
AAT3783
BatteryManagerTM 1-A Linear Li-Ion/Polymer Battery Charger with 28V Over-Voltage Protection
www.DataSheet4U.com
Typical Characteristics
Constant Charging Current
vs. Set Resistor Values
10000
1000
100
10
1
1 10 100
RSET (mA)
1000
Battery Charging Current
vs. Battery Voltage
1200
1000
800
RSET = 1.62kΩ
RSET = 2kΩ
600 RSET = 3.24kΩ
400
RSET = 8.06kΩ
200
0
2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 4.1 4.3 4.5
Battery Voltage (V)
End of Charge Regulation Tolerance vs. Input Voltage
(VBAT_EOC = 4.2V)
0.15
0.1
0.05
0
-0.05
-0.1
-0.15
4.5 5 5.5 6 6.5 7 7.5
Input Voltage (V)
End of Charge Voltage vs. Temperature
4.23
4.22
4.21
4.20
4.19
4.18
4.17
-40
-15 10
35
Temperature (°C)
60
85
Battery Recharge Voltage Threshold
vs. Temperature
4.16
4.14
4.12
4.1
4.08
4.06
4.04
-40
-15 10 35 60
Temperature (°C)
85
Preconditioning Charge Current
vs. Input Voltage
140
120
RSET = 1.62kΩ
100
80
RSET = 2kΩ
60
40 RSET = 3.24kΩ
20
RSET = 8.06kΩ
0
4.0 4.5 5.0 5.5 6.0 6.5
Input Voltage (V)
7.0
7.5
6
www.analogictech.com
3783.2008.08.1.2

6 Page



ページ 合計 : 20 ページ
 
PDF
ダウンロード
[ AAT3783 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AAT3783

1-A Linear Li-Ion/Polymer Battery Charger

Advanced Analogic Technologies
Advanced Analogic Technologies
AAT3783

1-A Linear Li-Ion/Polymer Battery Charger

Skyworks Solutions
Skyworks Solutions


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap