DataSheet.es    


PDF ISL54060 Data sheet ( Hoja de datos )

Número de pieza ISL54060
Descripción (ISL54060 / ISL54061) Dual SPST Analog Switch
Fabricantes Intersil Corporation　
Logotipo Intersil Corporation Logotipo



Hay una vista previa y un enlace de descarga de ISL54060 (archivo pdf) en la parte inferior de esta página.


Total 15 Páginas

No Preview Available ! ISL54060 Hoja de datos, Descripción, Manual

®
www.DataSheet4U.com
Data Sheet
+1.8V to +6.5V, Sub-ohm, Dual SPST
Analog Switch with Negative Signal
Capability
The Intersil ISL54060 and ISL54061 devices are a low
ON-resistance, low voltage, bi-directional, dual
single-pole/single-throw (SPST) analog switch. It is designed
to operate from a single +1.8V to +6.5V supply and pass
signals that swing up to 6.5V below the positive supply rail.
Targeted applications include battery powered equipment that
benefit from low rON (0.56Ω), low power consumption (8nA)
and fast switching speeds (tON = 55ns, tOFF = 18ns). The
digital inputs are1.8V logic-compatible up to a +3V supply.
The ISL54060, ISL54061 are offered in a small form factor
package, alleviating board space limitations. It is available in a
tiny 10 Ld 1.8 x 1.4mm µTQFN or 10 Ld 3x3mm TDFN
package.
The ISL54060 is a committed dual single-pole/single-throw
(SPST) that consist of two normally open (NO) switches with
independent logic control. The ISL54061 is a committed dual
single-pole/single-throw (SPST) that consist of two normally
closed (NC) switches with independent logic control.
TABLE 1. FEATURES AT A GLANCE
ISL54060
ISL54061
Number of Switches
2
2
SW
SPST NO
SPST NC
4.3V rON
4.3V tON/tOFF
2.7V rON
2.7V tON/tOFF
1.8V rON
1.8V tON/tOFF
Packages
0.65Ω
0.65Ω
43ns/23ns
43ns/23ns
0.9Ω
0.9Ω
55ns/18ns
55ns/18ns
1.8Ω
1.8Ω
145ns/28ns
145ns/28ns
10 Ld µTQFN, 10 Ld TDFN
ISL54060, ISL54061
December 19, 2008
FN6580.0
Features
• Pb-free (RoHS Compliant)
• Negative Signal Capability
• ON-Resistance (rON)
- V+ = +4.5V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.52Ω
- V+ = +4.3V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65Ω
- V+ = +2.7V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9Ω
- V+ = +1.8V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8Ω
• rON Matching Between Channels . . . . . . . . . . . . . . . . .10mΩ
• rON Flatness Across Signal Range . . . . . . . . . . . . . . . .0.33Ω
• Low THD+N @ 32Ω Load . . . . . . . . . . . . . . . . . . . . . . 0.02%
• Single Supply Operation. . . . . . . . . . . . . . . . . +1.8V to +6.5V
• Low Power Consumption (PD) . . . . . . . . . . . . . . . . . .8nA
• Fast Switching Action (V+ = +4.3V)
- tON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43ns
- tOFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23ns
• ESD HBM Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >6kV
• Guaranteed Break-before-Make
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when VINH is not at the V+ Rail
• Available in 10 Ld µTQFN 1.8x1.4mm and 10 Ld 3x3mm
TDFN
Applications
• Audio and Video Switching
• Battery powered, Handheld, and Portable Equipment
- MP3 and Multimedia Players
- Cellular/mobile Phones
- Pagers
- Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• Application Note AN557 “Recommended Test Procedures
for Analog Switches”
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.

1 page




ISL54060 pdf
ISL54060, ISL54061
Electrical Specifications - 5V Supply Test Conditions: V+ = +4.5V to +5.5V, GND = 0V, VINH = 2.4V, VINL = 0.8V (Note 9), Unless
Otherwise Specified. (Continued)
www.DataSheet4U.com
PARAMETER
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
V+ = 5.5V, VIN = 0V or V+
25
-
0.008
0.1
µA
Full - 1.41 -
µA
DIGITAL INPUT CHARACTERISTICS
Input Voltage Low, VINL
Input Voltage High, VINH
Input Current, IINH, IINL
V+ = 5.5V, VIN = 0V or V+
Full -
- 0.8
Full 2.4
-
-
25 -0.1
-
0.1
Full - 0.3 -
V
V
µA
µA
Electrical Specifications - 4.3V Supply
Test Conditions: V+ = +3.9V
Unless Otherwise Specified.
to
+4.5V,
GND
=
0V,
VINH
=
1.6V,
VINL
=
0.5V
(Note
9),
PARAMETER
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Notes 10, 11) TYP (Notes 10, 11) UNITS
ANALOG SWITCH CHARACTERISTICS
ON-Resistance, rON
V+ = 4.3V, ICOM = 100mA, VNO or VNC =
(V+ -6.5V) to V+ (see Figure 4)
25 - 0.65 -
Full - 0.72 -
Ω
Ω
rON Matching Between Channels, V+ = 4.3V, ICOM = 100mA, VNO or VNC = Voltage 25 - 10 - mΩ
ΔrON
at max rON, (Note 13)
Full - 15 - mΩ
rON Flatness, RFLAT(ON)
V+ = 4.3V, ICOM = 100mA, VNO or VNC =
(V+ -6.5V) to V+, (Note 12)
25 - 0.1 -
Full - 0.14 -
Ω
Ω
NO or NC OFF Leakage Current,
INO(OFF) or INC(OFF)
V+ = 4.3V, VCOM = -1.2V, 4.3V, VNO or VNC = 4.3V,
-1.2V
25
Full
-0.1 -
-1 -0.33
0.1
1
µA
µA
COM ON Leakage Current,
ICOM(ON)
V+ = 4.3V, VCOM = -1.2V, 4.3V, VNO or
VNC = Float
25 -0.1
-
0.1
Full -1 -0.33 1
µA
µA
DYNAMIC CHARACTERISTICS
Turn-ON Time, tON
V+ = 3.9V, VNO or VNC = 3.0V, RL = 50Ω,
CL = 35pF (see Figure 1)
25 - 43 -
Full - 50 -
ns
ns
Turn-OFF Time, tOFF
V+ = 3.9V, VNO or VNC = 3.0V, RL = 50Ω,
CL = 35pF (see Figure 1)
25 - 23.1 -
Full - 23.2 -
ns
ns
Charge Injection, Q
OFF-Isolation
CL = 1.0nF, VG = 0V, RG = 0Ω (see Figure 2)
RL = 50Ω, CL = 5pF, f = 100kHz, VCOM = 1VRMS
(see Figure 3)
25
25
- 200 -
- 60 -
pC
dB
Crosstalk (Channel-to-Channel)
RL = 50Ω, CL = 5pF, f = 1MHz, VCOM = 1VRMS
(see Figure 5)
Total Harmonic Distortion
f = 20Hz to 20kHz, VCOM = 2VP-P, RL = 32Ω
NOx or NCx OFF Capacitance,
COFF
f = 1MHz (see Figure 6)
COMx ON Capacitance, CCOM(ON) f = 1MHz (see Figure 6)
POWER SUPPLY CHARACTERISTICS
Positive Supply Current, I+
V+ = +4.5V, VIN = 0V or V+
Positive Supply Current, I+
V+ = +4.2V, VIN = 2.85V
25
25
25
25
25
Full
25
- -75 -
- 0.04 -
- 36 -
- 100 -
-
0.003
0.1
- 0.9 -
- 0.78 12
dB
%
pF
pF
µA
µA
µA
5 FN6580.0
December 19, 2008

5 Page





ISL54060 arduino
ISL54060, ISL54061
Typical Performance Curves TA = +25°C, Unless Otherwise Specified
www2..0DataSheet4U.com
1.8 ICOM = 100mA
V+ = 1.8V
1.6
1.4
1.2
1.0
0.8 V+ = 2.7V
0.6 V+ = 4.5V
0.4
0.2
-6 -5 -4 -3 -2 -1 0 1 2
34
VCOM (V)
FIGURE 8. ON-RESISTANCE vs SUPPLY VOLTAGE vs
SWITCH VOLTAGE
5
1.00
0.95
0.90
V+ = 4.5V
ICOM = 100mA
0.85
0.80
0.75
0.70
T = +85°C
0.65
0.60
0.55
T = +25°C
0.50
0.45
T = -40°C
0.40
0.35
0.30
-3 -2 -1 0 1 2 3 4 5
VCOM (V)
FIGURE 9. ON-RESISTANCE vs SWITCH VOLTAGE
1.00
0.95
0.90
0.85
V+ = 4.3V
ICOM = 100mA
0.80
0.75
0.70
0.65
T = +85°C
0.60
0.55
T = +25°C
0.50
0.45
T = -40°C
0.40
0.35
0.30
-3 -2 -1 0 1 2 3 4 5
VCOM (V)
FIGURE 10. ON-RESISTANCE vs SWITCH VOLTAGE
1.25
1.15
1.05
V+ = 2.7V
ICOM = 100mA
0.95
0.85
0.75
0.65
T = +85°C
0.55
T = +25°C
0.45
0.35
T = -40°C
-5 -4 -3 -2 -1 0
1 23
VCOM (V)
FIGURE 11. ON-RESISTANCE vs SWITCH VOLTAGE
4
2.2
V+ = 1.8V
2.0 ICOM = 100mA
1.8
1.6
1.4
1.2
1.0
0.8
T = +85°C
0.6
T = +25°C
0.4
T = -40°C
0.2
6 -5 -4 -3 -2 -1 0 1 2
VCOM (V)
FIGURE 12. ON-RESISTANCE vs SWITCH VOLTAGE
3
6
5
4 SIGNAL MAX
3
2
1
0
-1
-2
-3
-4 SIGNAL MIN
-5
-6
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
SUPPLY VOLTAGE (V)
FIGURE 13. ANALOG SIGNAL RANGE vs SUPPLY VOLTAGE
11 FN6580.0
December 19, 2008

11 Page







PáginasTotal 15 Páginas
PDF Descargar[ Datasheet ISL54060.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ISL54060(ISL54060 / ISL54061) Dual SPST Analog SwitchIntersil Corporation
Intersil Corporation
ISL54061(ISL54060 / ISL54061) Dual SPST Analog SwitchIntersil Corporation
Intersil Corporation
ISL54062Dual SPDT Analog SwitchIntersil Corporation
Intersil Corporation
ISL54063(ISL54063 / ISL54064) Dual SPSTIntersil Corporation
Intersil Corporation

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

 Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

 Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar