|
![]() |
OZ9938のメーカーはO2 Microです、この部品の機能は「LCDM Inverter Controller」です。 このページではOZ9938の詳細な仕様と技術情報(パラメータ、電気的特性、ピン配置など)を見つけることができます. |
部品番号 | OZ9938 |
| |
部品説明 | LCDM Inverter Controller | ||
メーカ | O2 Micro | ||
ロゴ | ![]() |
||
このページの下部にプレビューとOZ9938ダウンロード(pdfファイル)リンクがあります。 Total 12 pages
![]() CHANGES
No. Applicable Section
1. Electrical Characteristics
2. Throughout datasheet
OZ9938
Change Summary
Description
Update 慞rotection release threshold in Timer & protection
parameter Min & Max limits
Miscellaneous changes
Page(s)
3
---
REVISION HISTORY
Revision No.
0.60
0.65
1.0
Description of change
Initial release
1. Electrical Characteristics: a. Modify general test conditions in line 1; b.
Modify Driver Frequency Striking & Normal Operation Typ limit; c.
Modify PWM Dimming Control LCT frequency. 2. Reference Application
Circuit: Modify C14, C9 & R9 values
1. Ordering Information: Add OZ9938G, IG, D & DN. 2. Recommended
Operating Range: a. Add Dimming Range; b. Fill in Thermal Impedance.
3. Electrical Characteristics: a. Update Supply Current limits; b. Update
Soft Start limits; c. Update Under Voltage Lockout limits; d. Update
Reference Voltage limits; e. Update Driver Frequency limits; f. Update
Timer & Protection limits; g. Update Drivers parameter name & limits; h.
Update PWM Dimming Control limits; i. Delete Analog Dimming Control.
4. Function Description: Update formula in NO. 4 Ignition, No. 6 Normal
Operation & No. 9 Dimming Control. 5. Package Information: Add DIP
package drawing.
Release Date
5/12/2005
6/27/2005
9/22/2005
10/14/2005
OZ9938-DS-1.1
Copyright 2005 by O2Micro
All Rights Reserved
Patent#6,559,606, #6,856,519 & #6,809,938
www.DataSheet4U.net
Page 0
CONFIDENTIAL
1 Page ![]() ![]() OZ9938
PIN DESCRIPTION
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Names
DRV1
VDDA
TIMER
DIM
ISEN
VSEN
OVPT
NC
NC
ENA
LCT
SSTCMP
CT
GNDA
DRV2
PGND
Description
Drive output
Supply voltage input
Timing capacitor to set striking time and shutdown delay time
Analog dimming or Internal LPWM dimming or external PWM pulse input for
dimming function
Current sense feedback
Voltage sense feedback
Over-voltage/ over-current protection threshold setting pin
No connection
No connection
ON/OFF control of IC
Timing capacitor to set internal PWM dimming frequency and also a pin for
analog dimming selection
Capacitor for soft start time and loop compensation
Timing resistor and capacitor for operation and striking frequency
Ground for analog signals
Drive output
Ground for power paths
ABSOLUTE MAXIMUM RATINGS(1)
Input Voltage VDDA
GNDA
Signal Inputs
7.0V
+/- 0.3V
-0.3V to VDDA +0.3V
Operating Temp.
OZ9938
-20oC to 85oC
OZ9938I
-40oC to 85oC
Operating Junction Temp.
Storage Temp.
125oC
-55oC to 150oC
RECOMMENDED OPERATING RANGE
VDDA - Input Voltage
fop - Operating Frequency
Analog Dimming Range
Thermal Impedance ( )J-A
- 16-pin SOP
- 16-pin DIP
4.5V to 5.5V
20KHz to 150KHz
0.7V to 2.1V
86 oC/W
56 oC/W
Note (1): The 揂bsolute Maximum Ratings?are those values beyond which the safety of the device cannot be guaranteed.
The device should not be operated at these limits. The 揈lectrical Characteristics?table defines the conditions for actual
device operation. Exposure to absolute maximum rated conditions for
extended periods may affect device reliability.
CONFIDENTIAL
OZ9938-DS-1.1
Page 2
3Pages ![]() ![]() FUNCTIONAL BLOCK DIAGRAM
OZ9938
Figure 1
CONFIDENTIAL
OZ9938-DS-1.1
Page 5
6 Page | |||
ページ | 合計 : 12 ページ | ||
|
PDF ダウンロード | [ OZ9938 datasheet.PDF ] |
OZ9938 データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 また、OZ9938のさまざまなアプリケーション回路とユースケースを使用して独自の設計に統合する方法を理解するのに役立ちます。 |
あなたの検索基準に基づいて、興味のある他のデータシートを見つけました。同様の部品も一緒に検討することをお勧めします。 |
部品番号 | 部品説明 | メーカ |
OZ9932 | LCD Monitor CCFL Inverter Controller | ![]() O2Micro |
OZ9933 | (OZ99xx) Intelligent Lighting | ![]() O2Micro |
OZ9936 | LCD Monitor CCFL Inverter Controller | ![]() O2Micro |
OZ9937 | (OZ99xx) Intelligent Lighting | ![]() O2Micro |