|
|
EKLJ401ESS220MK20SのメーカーはNippon-Chemiconです、この部品の機能は「Aluminum Capacitors」です。 |
部品番号 | EKLJ401ESS220MK20S |
| |
部品説明 | Aluminum Capacitors | ||
メーカ | Nippon-Chemicon | ||
ロゴ | |||
このページの下部にプレビューとEKLJ401ESS220MK20Sダウンロード(pdfファイル)リンクがあります。 Total 2 pages
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Overvoltage resistant design, 105C
@Doesn't spark with DC over voltage
@Endurance with ripple current : 2,000 hours at 105C
@Non solvent resistant type
@ESR value prescribed
@RoHS Compliant
KLJ
Downsized
KLG
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range -25 to +105C
Rated Voltage Range
www.DataSheeCat4pUac.ictaonmce Tolerance
Leakage Current
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
200 & 400Vdc
P20% (M)
(at 20C, 120Hz)
I=0.04CV+100
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
(at 20C after 1 minute)
Rated voltage (Vdc)
200V 400V
tanE (Max.)
0.20 0.24
(at 20C, 120Hz)
Rated voltage (Vdc)
200V 400V
Z(-25C)/Z(+20C)
46
(at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for 2,000 hours at 105C.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE)
[200% of the initial specified value
Leakage current
[500% of the initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Brown)
Vent
L'
15min.
4min.
(F10)
(F12.5 to F18)
Gas escape end seal
fD 10 12.5 16 18
fd 0.6 0.6 0.8 0.8
F 5.0 5.0 7.5 7.5
fD' FD+0.5max.
L' L+1.5max.
?PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E KLJ 2 0 1 E LL 1 0 1 M L2 0 S
Supplement code (sleeve PET:S, Pb-free PVC:M)
Size code
Capacitance tolerance code
Capacitance code (ex. 100MF:101,4.7MF:4R7)
Lead forming·taping code
Terminal code
Voltage code (ex. 200V:201,400V:401)
Series code
Category
Please refer to "Product code guide (radial lead type)"
(1/2)
CAT. No. E1001I
1 Page | |||
ページ | 合計 : 2 ページ | ||
|
PDF ダウンロード | [ EKLJ401ESS220MK20S データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
EKLJ401ESS220MK20S | Aluminum Capacitors | Nippon-Chemicon |