DataSheet.jp

FL128P の電気的特性と機能

FL128PのメーカーはSPANSIONです、この部品の機能は「 S25FL128P」です。


製品の詳細 ( Datasheet PDF )

部品番号 FL128P
部品説明 S25FL128P
メーカ SPANSION
ロゴ SPANSION ロゴ 




このページの下部にプレビューとFL128Pダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

FL128P Datasheet, FL128P PDF,ピン配置, 機能
S25FL128P
www.DataSheet14U2.c8omMegabit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Bus
Data Sheet (Preliminary)
S25FL128P Cover Sheet
Notice to Readers: This document states the current technical specifications regarding the Spansion
product(s) described herein. Spansion Inc. deems the products to have been in sufficient production volume
such that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.
Publication Number S25FL128P_00
Revision 04
Issue Date July 2, 2007

1 Page





FL128P pdf, ピン配列
S25FL128P
128 Megabit CMOS 3.0 Volt Flash Memory
with 104-MHz SPI (Serial Peripheral Interface) Bus
Data Sheet (Preliminary)
Distinctive Characteristics
Architectural Advantages
„ Single power supply operation
– Full voltage range: 2.7 to 3.6 V read and program operations
www.DataShee„t4UM.ceommory Architecture
– 128Mb uniform 256 KB sector product
– 128Mb uniform 64 KB sector product
„ Program
– Page Program (up to 256 bytes) in 1.5 ms (typical)
– Faster program time in Accelerated Programming mode
(8.5 V–9.5 V on #WP/ACC) in 1.2 ms (typical)
„ Erase
– 2 s typical 256 KB sector erase time
– 0.5 s typical 64 KB sector erase time
– 128 s typical bulk erase time
– Sector erase (SE) command (D8h) for 256 KB sectors; (20h or D8h)
for 64KB sectors
– Bulk erase command (C7h) for 256 KB sectors; (60h or C7h) for
64KB sectors
„ Cycling Endurance
– 100,000 cycles per sector typical
„ Data Retention
– 20 years typical
„ Device ID
– RDID (9Fh), READ_ID (90h) and RES (ABh) commands to read
manufacturer and device ID information
– RES command one-byte electronic signature for backward
compatibility
„ Process Technology
– Manufactured on 0.09 µm MirrorBit® process technology
„ Package Option
– Industry Standard Pinouts
– 16-pin SO package (300 mils)
– 8-Contact WSON Package (6 x 8 mm)
Performance Characteristics
„ Speed
– 104 MHz clock rate (maximum)
„ Power Saving Standby Mode
– Standby Mode 200 µA (max)
– Deep Power Down Mode 3 µA (typical)
Memory Protection Features
„ Memory Protection
– WP#/ACC pin works in conjunction with Status Register Bits to
protect specified memory areas
– 256 KB uniform sector product:
Status Register Block Protection bits (BP2, BP1, BP0) in status
register configure parts of memory as read-only.
– 64KB uniform sector product:
Status Register Block Protection bits (BP3, BP2, BP1, BP0) in
status register configure parts of memory as read-only
Software Features
– SPI Bus Compatible Serial Interface
Hardware Features
„ x8 Parallel Programming Mode (for 16-pin SO package only)
General Description
The S25FL128P is a 3.0 Volt (2.7 V to 3.6 V), single-power-supply Flash memory device. The device consists
of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory.
The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The devices are
designed to be programmed in-system with the standard system 3.0 volt VCC supply.
The memory can be programmed 1 to 256 bytes at a time, using the Page Program command. The device
supports Sector Erase and Bulk Erase commands.
Each device requires only a 3.0 volt power supply (2.7 V to 3.6 V) for both read and write functions. Internally
generated and regulated voltages are provided for the program operations. This device requires a high
voltage supply to WP#/ACC pin for the Accelerated Programming mode.
Publication Number S25FL128P_00
Revision 04
Issue Date July 2, 2007
This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qual-
ification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document
may be revised by subsequent versions or modifications due to changes in technical specifications.


3Pages


FL128P 電子部品, 半導体
Data Sheet (Preliminary)
Tables
www.DataSheet4U.com
Table 5.1
Table 7.1
Table 7.2
Table 8.1
Table 8.2
Table 8.3
Table 11.1
Table 11.2
Table 11.3
Table 11.4
Table 11.5
Table 11.6
Table 12.1
Table 13.1
Table 15.1
Table 16.1
Table 17.1
Table 18.1
Table 19.1
S25FL128P Valid Combinations Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
S25FL128P Protected Area Sizes (Uniform 256 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . . .13
S25FL128P Protected Area Sizes (Uniform 64 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . . . .13
S25FL128P Device Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
S25FL128P Sector Address Table (Uniform 256 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . .15
S25FL128P Sector Address Table (Uniform 64 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . . .16
Manufacturer & Device Identification, RDID (9Fh) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
READ_ID Command and Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
S25FL128P Status Register (Uniform 256 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
S25FL128P Status Register (Uniform 64 KB sector) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Protection Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Command Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
ACC Program Acceleration Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Power-Up Timing Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
DC Characteristics (CMOS Compatible) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Test Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
AC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
6
S25FL128P
S25FL128P_00_04 July 2, 2007

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ FL128P データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FL128P

S25FL128P

SPANSION
SPANSION


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap