DataSheet.jp

AU6391 の電気的特性と機能

AU6391のメーカーはAlcorです、この部品の機能は「USB2.0 to ATA/ATAPI Bridge Controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 AU6391
部品説明 USB2.0 to ATA/ATAPI Bridge Controller
メーカ Alcor
ロゴ Alcor ロゴ 




このページの下部にプレビューとAU6391ダウンロード(pdfファイル)リンクがあります。
Total 22 pages

No Preview Available !

AU6391 Datasheet, AU6391 PDF,ピン配置, 機能
Data Book
1
www.DataSheet4U.com
AU6391
USB2.0 to ATA/ATAPI Bridge
Controller
Technical Reference Manual
Product Specification
Official Release
Revision 1.00W
Public
Feb 2007

1 Page





AU6391 pdf, ピン配列
Copyright Notice
Copyright 1997 - 2007
Alcor Micro Corp.
All Rights Reserved.
Trademark Acknowledgements
The company and product names mentioned in this document may be the trademarks
or registered trademarks of their manufacturers.
Disclaimer
www.DataSheet4U.com Alcor Micro Corp. reserves the right to change this product without prior notice.
Alcor Micro Corp. makes no warranty for the use of its products and bears no
responsibility for any error that appear in this document. Specifications are subject to
change without prior notice.
Contact Information:
Web site: http://www.alcormicro.com/
Taiwan
Alcor Micro Corp.
4F, No 200 Kang Chien Rd., Nei Hu,
Taipei, Taiwan, R.O.C.
Phone: 886-2-8751-1984
Fax: 886-2-2659-7723
China ShenZhen Office
Rm.2407-08, Industrial Bank Building
No.4013, Shennan Road ,ShenZhen,China.
518026
Phone: (0755) 8366-9039
Fax: (0755) 8366-9101
Santa Clara Office
2901 Tasman Drive, Suite 206
Santa Clara, CA 95054
USA
Phone: (408) 845-9300
Fax: (408) 845-9086
Los Angeles Office
9070 Rancho Park Court
Rancho Cucamonga, CA 91730
USA
Phone: (909) 483-9900
Fax: (909) 944-0464
AU6391 USB2.0 to ATA/ATAPI Bridge Controller V1.00W
Official Release _ Public
Page 3 of 22


3Pages


AU6391 電子部品, 半導体
1.0 Introduction
1.1 Description
The AU6391 is a single chip controller designed for bridgingg USB 2.0 to ATA/ATAPI
bus interface. It is used as the primary controller of building an external USB 2.0
hard disk or CD/DVD drives.
www.DataSheet4U.com To maximize the data throughput and achieve the best compatibility, AU6391 is
equipped with Alcor’s proprietary automatic speed negotiation (ASN) algorithm. The
ASN algorithm allows AU6391 to select optimized operating mode that device can
best support a reliable data transfer from PIO mode 0~4 and Ultra DMA mode 2/4.
The silicon would work with the default device driver from Windows ME, Windows
2000, Windows XP and Mac OS X, however, vendor device driver provided by Alcor
Micro would enable the built device working under Windows 98, Windows 2000
(SP1/SP2) and Mac OS 9.
1.2 Features
Supports USB 2.0 specification and USB Device Class Definition for Mass
Storage, Bulk-Transport V1.0
Supports ATA/ATAPI-6 specification Revision 1.0
PIO mode 0~4
UDMA mode 2/4
Supports ATA/ATAPI device configured in master or slave mode
Supports 48-bit addressing for large capacity hard drive
Hardware DMA engine integrated inside for performance enhancement
Works with default device driver from Windows ME/2000/XP and Mac OS X.
One spared LED pin for disk access indication
Built-in voltage regulator
48-pin LQFP package
AU6391 USB2.0 to ATA/ATAPI Bridge Controller V1.00W
Official Release _ Public
Page 6 of 22

6 Page



ページ 合計 : 22 ページ
 
PDF
ダウンロード
[ AU6391 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AU6390

USB2.0 to ATA/ATAPI Bridge Controller

Alcor
Alcor
AU6391

USB2.0 to ATA/ATAPI Bridge Controller

Alcor
Alcor
AU6395

USB2.0 to SATA Bridge Controller

Alcor
Alcor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap