|
|
Número de pieza | iT3010 | |
Descripción | 10 GHz medium-gain differential amplifier | |
Fabricantes | Iterra | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de iT3010 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! iT3010
10 GHz Medium-Gain Differential Amplifier
Description
www.DataSheet4U.com
Features
The iT3010 is a packaged differential amplifier designed for use in 10.7 Gb/s and 12.5 Gb/s
(OC-192) optical transmitters and receivers as a gain stage with limiting functionality. It allows
single-ended input signals from 350 mVpp up to 900 mVpp, or differential signals from 250
mVpp to 1800 mVpp to be limited at a constant differential output voltage of 3.8 Vpp. The
iT3010 can be used as predriver for OC-192 optical modulator driver amplifiers. Output voltage
control and external offset correction are provided. The amplifier also provides excellent linear
performance when operating at lower output voltage. Both AC and DC input coupling are
allowed. DC-coupled SCFL differential input (input HIGH voltage = 0 V, and input LOW voltage
= -900 mV) are allowed.
Limiting function with 3.8 Vpp differential output
3 dB Bandwidth: 10 GHz
Differential gain: 23.5 dB
Standard bias supply: -5 V or -5.2V, +5 V
Power consumption: 855 mW
<1% total harmonic distortions @ Pout=0 dBm
Low group delay
Low jitter
Output voltage control
AC and DC input coupling (SCFL compatible)
AC and DC output coupling
Low-cost package, JEDEC QFP-N (MO-220)
Absolute
Maximum
Ratings
Sym bol
Vee
Vcc
Vd
Vm
IDC IN (+),(-)
Tch
Tstg
Param eters/conditions
Pow er supply voltage
Pow er supply voltage
Applied voltage at data input (differential)
Applied voltage at data input (single ended)
Offset control current
Maximum channel temperature
Storage temperature
M in.
-8
0
-65
M ax.
0
8
3
1.5
5
150
150
Units
V
V
V
V
mA
°C
°C
Recommended
Operating
Conditions
Symbol
Tc
Vee
Vcc
Vcb2
Iee
Icc
VDC IN
Vctrl
Vm
Vd
Vindc
R
Parameters/conditions
Operating temperature range (Tcase)
Negative pow er supply voltage
Positive pow er supply voltage
First internal bias control voltage
Negative supply current
Positive supply current
Offset control voltage
Voltage control pin
Applied peak-peak voltage at data input (single ended)
Applied peak-peak voltage at data input (differential)
DC input voltage (w ith DC-coupled input)
Data bit rate
Min.
0
-5.45
4.75
86
60
-5
-2.7
350
250
-0.5
Typ.
-5
5
0
101
70
Max.
85
-4.75
5.25
116
81
5
0
900
1800
0
12.5
Units
oC
V
V
V
mA
mA
V
V
mV
mV
V
Gb/s
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
August 17, 2005 Doc. 1178 Rev 9
1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
1 page Power
Performance And
Harmonic
Distortion
www.DataSheet4U.com
Device
System Diagram
iT3010
10 GHz Medium-Gain Differential Amplifier
Pout vs Frequency
15
14
13
12
11
10
9
8
7
6
5
4
P1dB
P3dB
3
2
1
0
2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10
Freq. (GHz)
Vee=-5 V, Vcc=+5 V, Iee=105 mA, Icc=65
mA
0
-6
-12
-18
-24
-30
-36
-42
-48
-54
-60
0
Total Harmonics Distortion vs Frequency
1234567
Freq. (GHz)
8
At Pout=0 dBm. Vee=-5 V, Vcc=+5 V,
Iee=105 mA, Icc=65 mA
DCIn
Din
/Din
/DCIn
Vctrl
1kΩ 50Ω
1kΩ 50Ω
Vee
Vcb2
Q
/Q
Vcc
Recommended
Operational Setup
Vctrl
DCIn
1μF Vcb2
Input
-5.0 V
Din
iT3010
Q
/Din /Q
/DCIn Vee
Vcc
1μF 560pF 560pF
Output
+5 V
1μF
Bias Conditions
For Vee = -5V
• Apply +5.0 V at Vcc
• Apply -5 V at Vee
• Vcb2 =0 V
• Vctrl = -2.7 V or open for maximum
output voltage
• Vctrl from –2.7V to –1V for output
voltage control
For Vee = -5.2 V bias application
• Apply +5 V at Vcc
• Apply -5.2 V at Vee
• Vcb2 = 0 V
• Vctrl =-1.8 V for maximum output
voltage
• Vctrl from –1.8V to –1V for output
voltage control
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or catalog for product development status.
August 17, 2005 Doc. 1178 Rev 9
5
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet iT3010.PDF ] |
Número de pieza | Descripción | Fabricantes |
iT3010 | 10 GHz medium-gain differential amplifier | Iterra |
iT3010E | Medium gain differential amplifier | gigoptix |
iT3011 | 12.5-Gb/s high-sensitivity limiter amplifier | Iterra |
iT3011E | High-sensitivity limiter amplifier | gigoptix |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |