|
|
Número de pieza | iT5060 | |
Descripción | 12.5 Gb/s modulator driver amplifier | |
Fabricantes | Iterra | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de iT5060 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! iT5060
12.5 Gb/s, 8 Vpp Modulator Driver
(for use with bias-tee)
Description
www.DataSheet4U.com
The iT5060 is a low-cost, plastic-packaged (QFP-N) broadband GaAs traveling-wave MMIC
amplifier with high output voltage. In optical communication systems, it is well suited as a driver
for EO/LiNo3 modulators by providing from 3 to 8 Vpp output voltage for NRZ signals up to 12.5
Gb/s. In low-voltage mode, the iT5060 can be used as a pre-driver for a 1.5 to 3 Vpp output
voltage. The amplifier can also be used as an optical receiver amplifier gain stage for photodiodes
or as a limiting amplifier after the transimpedance amplifier. It can operate from DC to 12.5 GHz
with 14 dB linear gain, a +21 dBm P1dB compression point, and +23 dBm Psat. The iT5060
employs GaAs pHEMT technology with silicon nitride as the dielectric of the on-chip MIM
capacitors. RF ports of the iT5060 must be AC coupled and drain bias is provided by external
choke. Output voltage control is achieved by reducing the Vd power supply. An on-chip power
detector allows external temperature compensation to be provided. For low-voltage operation, the
iT5060 can be biased through an on-chip resistor, eliminating the need for a bias tee.
Features
Absolute
Maximum
Ratings
Broad bandwidth: DC to 11 GHz
Suitable for up to 12.5 Gb/s
Moderate gain: 14 dB
Output voltage: 8 Vpp
Adjustable output voltage: (3 Vpp to 8 Vpp)
Return Loss: Input –10 dB, output –10 dB
Bias: 5 V, at 210 mA
Power dissipation:
1.1 W at Vout = 8 Vpp
400 mW at Vout = 3 Vpp
On-chip power detector
Low-cost JEDEC QFP-N (M02-200) package
Symbol
Vd
Vg
Id
Pin
Tch
Tstg
Parameters/conditions
Positive voltage
Negative voltage
Positive supply current
Input RF power
Operating channel temperature
Storage temperature
Min.
-3
-65
Typ.
Max.
8
300
23
150
150
Units
V
V
mA
dBm
ºC
ºC
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or in catalog for latest development status.
March 30, 2005 Doc. 4075 Rev 0
1
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
1 page Package Pad
Location
1. Dimensions:
inches (mm)
2. Tolerance on
dimensions
is +/- 0.0039
(0.100)
www.DataShee(tU4Unl.ecsosmotherwise
specified):
iT5060
12.5 Gb/s, 8 Vpp Modulator Driver
(for use with bias-tee)
Pinouts
P1:
P2:
P3:
P4:
P5:
P6:
P7:
P8:
P9:
P10:
P11:
P12:
P13
P14
P15:
P16:
Not used
Ground
RF Input
Ground
Not used
Not used
Not used
Vg, negative bias supply, eye crossing control
Ground
Ground
RF output and Vd positive bias supply in case of High-voltage mode
Vdet, power detector output
(+) Reference diode
(-) Reference diode
VDL1, First drain load termination and positive bias supply in case of low-voltage mode
VDL2, Second drain load termination
www.iterrac.com
This is a Production data sheet. See “Product Status Definitions”
on Web site or in catalog for latest development status.
March 30, 2005 Doc. 4075 Rev 0
5
iTerra Communications
2400 Geng Road, Ste. 100, Palo Alto, CA 94303
Phone (650) 424-1937, Fax (650) 424-1938
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet iT5060.PDF ] |
Número de pieza | Descripción | Fabricantes |
IT506 | (IT500 - IT506) Monolithic Dual Cascoded N-Channel JEET General Purpose Amplifier | Intersil Corporation |
iT5060 | 12.5 Gb/s modulator driver amplifier | Iterra |
iT5061 | 8 Vpp modulator driver | Iterra |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |