|
|
BR-HG033-05V-TRBのメーカーはBRIGHT LED ELECTRONICSです、この部品の機能は「LED」です。 |
部品番号 | BR-HG033-05V-TRB |
| |
部品説明 | LED | ||
メーカ | BRIGHT LED ELECTRONICS | ||
ロゴ | |||
このページの下部にプレビューとBR-HG033-05V-TRBダウンロード(pdfファイル)リンクがあります。 Total 6 pages
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-05V-TRB
● Features:
1. Emitted Color : Super Red.
2. Lens Appearance : Water Clear
3. Mono-color type.
4. 3.2x1.6x1.1mm(1206) standard package
5. Suitable for all SMT assembly methods.
6. Compatible with infrared and vapor phase
www.DataSheet4U.com
reflow solder process.
7. Compatible with automatic placement
equipment.
8. For DC and pulse operationWith current
limiting resistor for 5V TTL & CMOS
compatible.
9. This product doesn’t contain restriction
Substance, comply ROHS standard.
● Applications:
1. Automotive : Dashboards, stop lamps,
turn signals.
2. Backlighting : LCDs, Key pads advertising.
3. Status indicators : Comsumer & industrial
electronics.
4. General use.
●Package Dimensions:
LED die
NOTES:
1.All dimensions are in millimeters (inches).
2.Tolerance is ± 0.10mm (0.004”) unless otherwise specified.
3.Specifications are subject to change without notice.
● Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
Operating Voltage MXA
VF
Operating Temperature
Topr
Storage Temperature
Tstg
Soldering Temperature
Tsol
*1 Condition for IFp is pulse of 1/10 duty and 0.1msec width.
Rating
5
-25℃~80℃
-30℃~85℃
See Page6
Unit
V
-
-
-
Ver.1.1 Page 1 of 6
1 Page BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-05V-TRB
● Tapping and packaging specifications(Units: mm)
START
USER DIRECTION OF FEED
1.88± 0.1
END
1.27± 0.1
13.0± 0.5
www.DataSheet4U.com
4.0 ± 0.1
4.0 ± 0.1
1.5± 0.1
2.0± 0.05
●Package Method:(unit:mm)
0.3
NOTE: 3000 pcs PER REEL
12 bag/box
3000 pcs/reel
TRAILER
FIXING TAPE
LEADER
Bar Code Label
245
220 Aluminum Foil Bag
220
200
185
645
6 box/carton
210
470
Ver.1.1 Page 3 of 6
3Pages BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-05V-TRB
● Notes for designing:
Care must be taken to provide the current limiting resistor in the circuit so as to drive the BRIGHT
LEDs within the rated figures. Also, caution should be taken not to overload BRIGHT LEDs with
instantaneous voltage at the turning ON and OFF of the circuit.
When using the pulse drive care must be taken to keep the average current within the rated figures.
Also, the circuit should be designed so as be subjected to reverse voltage when turning off the
BRIGHT LEDs.
● Storage:
www.DataSheet4IUn.coomrder to avoid the absorption of moisture, it is recommended to solder BRIGHT LEDs as soon as
possible after unpacking the sealed envelope.
If the envelope is still packed, to store it in the environment as following:
(1) Temperature : 5℃-30℃(41℉)Humidity : RH 60﹪Max.
(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or
equivalent soldering process must be:
a. Completed within 24 hours.
b. Stored at less than 30% RH.
(3) Devices require baking before mounting, if:
(2) a or (2) b is not met.
(4) If baking is required, devices must be baked under below conditions:
12 hours at 60℃±3℃.
● Package and Label of Products:
(1) Package: Products are packed in one bag of 3000 pcs (one taping reel) and a label is attached
on each bag.
(2) Label:
BRIGHT LED LOGO
Part No.
Quantity
BIN.
Sealing Date
x xx xx xx
Year Month Day
Manufacture Location
Ver.1.1 Page 6 of 6
6 Page | |||
ページ | 合計 : 6 ページ | ||
|
PDF ダウンロード | [ BR-HG033-05V-TRB データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
BR-HG033-05V-TRB | LED | BRIGHT LED ELECTRONICS |