|
|
PDF HO1065 Data sheet ( Hoja de datos )
| Número de pieza | HO1065 | |
| Descripción | SAW Oscillator | |
| Fabricantes | RF Monolithics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HO1065 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
• SAW Frequency Stabilization
• Fundamental-Mode Oscillation at 400.0 MHz
• 0.8” x 0.5” x 0.25” Metal Dip Case
This general-purpose oscillator is stabilized by surface-acoustic-wave (SAW) technology. Fundamental oscil-
lation at 400.0 MHz eliminates all internally generated spurious outputs except integral harmonics of 400.0
MHz. The compact size of the rugged, metal, hermetically-sealed case makes this oscillator suitable for a va-
riety of applications.
HO1065
400.0 MHz
SAW
Oscillator
www.DataSheet4U.com
Absolute Maximum Ratings
Rating
DC Supply Voltage
Ambient Temperature
Powered
Storage
Electrical Characteristics
Characteristic
Operating Frequency Absolute Frequency
Tolerance from 400.0 MHz
RF Output Power
Spurious Outputs
Second Harmonics
Third and Higher Harmonics
RF Impedance
Nonharmonic
Nominal Impedance
DC Power Supply
Operating Load VSWR
Operating Voltage
Operating Current
Operating Ambient Temperature
Lid Symbolization (YY=Year, WW=Week)
Value
0 to +13
-40 to +70
-40 to +85
Units
VDC
°C
Dip 14-8 Case
Sym
fO
∆fO
PO
ZO
ΓL
VCC
ICC
TA
Notes
1, 7
3, 6
3, 6, 7
3
3, 5
3, 6
3, 6
Minimum
399.800
+10
Typical
400
+13
<-80
50
10.8 12.0
40
-40
RFM HO1065 YYWW
Maximum
400.200
±200
-15
-20
-60
1.5:1
13.2
50
+70
Units
MHz
kHz
dBm
dBc
Ω
VDC
mA
°C
CAUTION: Electrostatic Sensitive Device. Observe precautions for
handling. COCOM CAUTION: Approval by the U.S. Department
of Commerce is required prior to export of this device.
Notes:
1. One or more of the following United States patents apply: 4,616,197; 4,610,681; and
4,761,616.
2. Unless noted otherwise, all specifications are listed at TA = +25°C ±2°C, VCC = nom-
inal voltage ±0.01 VDC, and load impedance = 50 Ω with VSWR ≤ 1.5:1.
3. The design, manufacturing process, and specifications of this device are subject to
change without notice.
4. Applies to oscillator only and not to sidebands caused by external electrical or
mechanical sources. (Dedicated external voltage regulation with low-frequency filter-
ing for the DC power supply and proper circuit board layout are recommended for
optimum spectral purity.)
5. For specified maximum operating load VSWR (any angle) at FO. (No instability or
damage will occur for any passive load impedance.)
6. For any combination of VCC and TA within the specified operating ranges.
7. Applies for any combination of Note 5 and 6 conditions.
RF Monolithics, Inc. Phone: (972) 233-2903
Fax: (972) 387-9148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
BLOCK DIAGRAM
V CC
SAW Oscillator
RF OUTPUT
Buffer Amplifier
ELECTRICAL CONNECTIONS
VCC 1
Case Ground 2
Top
View
CC
13 Case Ground
Case Ground 6
RF Output 7
9 Case Ground
8 VCC
E-mail: [email protected]
http://www.rfm.com
HO1065-101599
Page 1 of 2
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet HO1065.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HO1065 | SAW Oscillator | RF Monolithics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |