DataSheet.jp

3B0365J の電気的特性と機能

3B0365JのメーカーはInfineon Technologiesです、この部品の機能は「 ICE3B0365J」です。


製品の詳細 ( Datasheet PDF )

部品番号 3B0365J
部品説明 ICE3B0365J
メーカ Infineon Technologies
ロゴ Infineon Technologies ロゴ 




このページの下部にプレビューと3B0365Jダウンロード(pdfファイル)リンクがあります。

Total 26 pages

No Preview Available !

3B0365J Datasheet, 3B0365J PDF,ピン配置, 機能
Version 2.3, 8 May 2006
C o o l S E T ™ -F3
(Jitter Version)
ICE3B0365J
ICE3B0565J
ICE3B1565J
Off-Line SMPS Current Mode
Controller with integrated 650V
Startup Cell/Depletion CoolMOS™
Power Management & Supply
Never stop thinking.

1 Page





3B0365J pdf, ピン配列
CoolSET™-F3
ICE3Bxx65J
Off-Line SMPS Current Mode Controller with
integrated 650V Startup Cell/Depletion CoolMOS™
Product Highlights
• Active Burst Mode to reach the lowest
Standby Power Requirements < 100mW
• Adjustable Blanking Window for High Load
Jumps to increase Reliability
• Frequency Jittering for Low EMI
• Pb-free lead plating, RoHS compilant
test
PG-DIP-8-6
Features
Description
• 650V Avalanche Rugged CoolMOS™ with built in The CoolSET™-F3(Jitter version) meets the requirements
switchable Startup Cell
for Off-Line Battery Adapters and low cost SMPS for the
• Active Burst Mode for lowest Standby Power
lower power range. By use of a BiCMOS technology a wide
@ light load controlled by Feedback Signal
VCC range up to 26V is provided. This covers the changes
• Fast Load Jump Response in Active Burst Mode in the auxiliary supply voltage if a CV/CC regulation is
• 67 kHz fixed Switching Frequency
implemented on the secondary side. Furthermore an Active
• Auto Restart Mode for Over temperature
Burst Mode is integrated to fullfill the lowest Standby Power
Detection
• Auto Restart Mode for Overvoltage Detection
Requirements <100mW at no load and Vin = 270VAC. As
during Active Burst Mode the controller is always active
• Auto Restart Mode for Overload and Open Loop there is an immediate response on load jumps possible
• Auto Restart Mode for VCC Undervoltage
without any black out in the SMPS. In Active Burst Mode
• User defined Soft Start
the ripple of the output voltage can be reduced <1%.
• Minimum of external Components required
Furthermore Auto Restart Mode is entered in case of
• Max Duty Cycle 75%
Overtemperature, VCC Overvoltage, Output Open loop or
• Overall Tolerance of Current Limiting < ±5%
Overload and VCC Undervoltage. By means of the internal
• Internal Leading Edge Blanking
precise peak current limitation, the dimension of the
• BiCMOS technology provides wide VCC Range transformer and the secondary diode can be lowered which
• Frequency Jittering for Low EMI
leads to more cost efficiency.
85 ... 270 VAC
GND
Typical Application
C B ulk
Snubber
VCC
Power Management
CVCC
Drain
Startup Cell
PWM Controller
Current Mode
Precise Low Tolerance Peak
Current Limitation
Control
Unit
Active Burst Mode
Auto Restart Mode
CS
Depl. CoolMOS™
FB
RSense
SoftS
C oo lS ET ™ -F 3
(Jitter Version)
C S oftS
+
Converter
DC Output
-
Type
ICE3B0365J
Package
PG-DIP-8-6
Marking
ICE3B0365J
VDS
650V
FOSC
67kHz
RDSon1)
6.45Ω
230VAC ±15%2)
22W
ICE3B0565J
PG-DIP-8-6 ICE3B0565J 650V
67kHz
4.70Ω
25W
ICE3B1565J
PG-DIP-8-6 ICE3B1565J 650V
67kHz
1.70Ω
42W
1) typ @ T=25°C
2) Calculated maximum input power rating at Ta=75°C, Tj=125°C and without copper area as heat sink
Version 2.3
3
85-265 VAC2)
10W
12W
20W
8 May 2006


3Pages


3B0365J 電子部品, 半導体
2 Representative Blockdiagram
CoolSET™-F3
ICE3Bxx65J
Figure 2 Representative Blockdiagram
Version 2.3
6
8 May 2006

6 Page



ページ 合計 : 26 ページ
 
PDF
ダウンロード
[ 3B0365J データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
3B0365

ICE3B0365

Infineon Technologies
Infineon Technologies
3B0365J

ICE3B0365J

Infineon Technologies
Infineon Technologies
3B0365J

ICE3B0365J

Infineon Technologies
Infineon Technologies


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap