DataSheet.jp

MN101C77 の電気的特性と機能

MN101C77のメーカーはMatsushita Electricです、この部品の機能は「MN101 Series microcontroller」です。


製品の詳細 ( Datasheet PDF )

部品番号 MN101C77
部品説明 MN101 Series microcontroller
メーカ Matsushita Electric
ロゴ Matsushita Electric ロゴ 




このページの下部にプレビューとMN101C77ダウンロード(pdfファイル)リンクがあります。

Total 30 pages

No Preview Available !

MN101C77 Datasheet, MN101C77 PDF,ピン配置, 機能
Sheet4U.com
AM1 (MN101) Series
AM1 (MN101) Series
The AM1 Series of 8-bit microcomputers is the realization of developments in C
programming.
Because of the 8-bit architecture, which allows half-byte instruction sets and offers
other advantages, assembler ROM code size can be reduced.
They are compact and consume little power, but feature a shortest instruction
processing time of 63 ns (5 V).
They can be used in a wide variety of applications where cost performance is a
demand.
Features
q Efficiency of C-based ROM code: Assembler rate 1 or less
q High-speed instruction processing: 63 ns (32 MHz)
q Linear address space: 1 MB
q Identical architecture for 32- and 16-bit microcomputers
q Option functions
Hardware task switching (Max. 4 task)
16-bit multiplication
ROM collection
s Application

1 Page





MN101C77 pdf, ピン配列
www.DataSheet4U.com
MN101C28A , MN101C28C , MN101C28D
MN101C28F , MN101C28L
Serial Interface
I/O Pins
I/O
Input
A/D Inputs
Special Ports
Electrical Characteristics
Supply current
Parameter
Operating supply current
Supply current at HALT
Supply current at STOP
Serial 0 : synchronous type/simple UART (half-duplex) × 1
Clock source ····················· 1/2, 1/4, 1/16 of system clock frequency; output of timer counter 3
Serial 1 : synchronous type × 1
Clock source ····················· 1/2, 1/8, 1/64 of system clock frequency; output of timer counter 3
Serial 2 : synchronous type/single-master I2C × 1
Clock source ····················· 1/4, 1/8, 1/16, 1/32 of system clock frequency; 1/4 of timer counter 0 frequency
57 • Common use • Specified pull-up resistor available • Input/output selectable (bit unit)
13 • Common use • Specified pull-up resistor available
10-Bit × 8-ch. (with S/H)
Buzzer output, remote control carrier signal output, high-current drive port
Symbol
IDD1
IDD2
IDD3
IDD4
Condition
fosc = 20 MHz, VDD = 5 V
fx = 32.768 kHz, VDD = 3 V
fx = 32.768 kHz, VDD = 3 V, Ta = 25°C
fx = 32.768 kHz, VDD = 3 V, Ta = 85°C
VDD = 5 V, Ta = 25°C
VDD = 5 V, Ta = 40°C to +85°C
Limit
Unit
min typ max
25 50 mA
40 120 µA
4 8 µA
20 µA
1 µA
30 µA
MAD00006EEM
See the next page for pin assignment and support tool.
13


3Pages


MN101C77 電子部品, 半導体
www.DataSheet4U.com
MN101C309 , MN101C30A
Type
ROM (× 8-bit)
External memory can be expanded
RAM (× 8-bit)
External memory can be expanded
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN101C309
24 K
MN101C30A
32 K
1 K 1.5 K
LQFP064-P-1414 *Lead-fre
0.10 µs (at 4.5 V to 5.5 V, 20 MHz)
0.238 µs (at 2.7 V to 5.5 V, 8.39 MHz)
1.00 µs (at 2.0 V to 5.5 V, 2 MHz)*
125 µs (at 2.0 V to 5.5 V, 32.768 kHz)*
* The lower limit for operation guarantee for EPROM built-in type is 2.7 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • Timer 0
• Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 5 • Time Base • Serial 0 • Serial 1
• Automatic transfer finish • A/D conversion finish
Timer counter 0 : 8-bit × 1 (square-wave/8-bit PWM output, event count, generation of remote control carrier)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/16, 1/64 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1 (square-wave/8-bit PWM output, event count, synchronous output event)
Clock source ····················· 1/1, 1/4 of system clock frequency; 1/1 of XI oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 16-bit × 1
(square-wave/16-bit PWM output, event count, synchronous output event, input capture)
Clock source ····················· 1/4, 1/16 of system clock frequency; 1/1 of OSC oscillation clock frequency;
external clock input
Interrupt source ················· coincidence with compare register 4
Time base timer (one-minute count setting, independently operable 8-bit timer counter 5)
Clock source ····················· 1/4 of system clock frequency; 1/1, 1/8192 of OSC oscillation clock frequency;
1/1, 1/8192 of XI oscillation clock frequency
Interrupt source ················· coincidence with compare register 5; 1/8192 prescaler overflow
Watchdog timer
Interrupt source ················· 1/65536, 1/262144, 1/1048576 of system clock frequency (ROM option)
MAD00005EEM
16

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ MN101C77 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MN101C70C

MN101 Series microcontroller

Matsushita Electric
Matsushita Electric
MN101C73A

MN101 Series microcontroller

Matsushita Electric
Matsushita Electric
MN101C74

MN101 Series microcontroller

Matsushita Electric
Matsushita Electric
MN101C77

MN101 Series microcontroller

Matsushita Electric
Matsushita Electric


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap